Wraps by car

Pontiac Wave wrap

A Pontiac Wave wrap is a color change or paint protection project that fits a subcompact car sold in two body styles and two generations. The catalog covers the 2004–2006 first generation and the 2006–2009 second generation, both offered as a hatchback or a sedan. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the hatchback or 52 ft (16 m) for the sedan. This vinyl wrap estimate is for a standard color change; chrome or patterned film may reach 62 ft (19 m) on the second generation.

2generations16 mof film for a full wrap

Pontiac Wave, second generation, factory photo
Pontiac Wave, second generation. Factory color shown.

Pontiac Wave wrap colors and ideas

  • Wave black wrap
  • Wave white wrap
  • Wave gray wrap
  • Wave silver wrap
  • Wave red wrap
  • Wave blue wrap
  • Wave green wrap
  • Wave yellow wrap
  • Wave orange wrap
  • Wave purple wrap
  • Wave pink wrap
  • Wave teal wrap
  • Wave brown wrap
  • Wave gold wrap
  • Wave chrome wrap
  • Wave color shift wrap
  • Wave carbon fiber wrap
  • Wave camo and patterned wrap

How much vinyl to wrap a Pontiac Wave

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2009hatchback, sedan (4 or 5 doors)152.8 in (3,880 mm) to 169.7 in (4,310 mm)about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
2004–2006hatchback, sedan (4 or 5 doors)152.8 in (3,880 mm) to 166.7 in (4,235 mm)about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Wave wrap cost factors

Wave wrap cost depends on the size of the car, the film choice, and the work on the rear glass area. The subcompact body needs 51 ft (15.5 m) to 52 ft (16 m) of 60-inch (1.52 m) cast film, so material volume is a key part of the quote. A chrome film or a patterned film adds about 10 ft (3 m) over the standard estimate on both generations. Removing the tailgate trim to wrap around the glass also adds shop time to the cost of a full Pontiac Wave wrap.

  • Film for a full wrap: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Wave wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Wave, second generation, factory photo
Factory color shown

2006–2009 Wave hatchback, sedan (second generation)

2006–2009hatchback, sedan (4 or 5 doors)152.8 in (3,880 mm) to 169.7 in (4,310 mm)

The Pontiac Wave second generation comes as a hatchback or a sedan, and the style decides the panel plan and the film amount. The hatchback takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the sedan reaches 52 ft (16 m) because of its longer tail. The rear panel on the hatchback includes the glass, so the film stops at the edge of the window. Both bodies fall into the same subcompact class, which keeps the wrap material close.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Pontiac Wave, first generation, factory photo
Factory color shown

2004–2006 Wave hatchback, sedan (first generation)

2004–2006hatchback, sedan (4 or 5 doors)152.8 in (3,880 mm) to 166.7 in (4,235 mm)

A wrap on a first generation Pontiac Wave has to work with paint age on a car from 2004 to 2006. Some panels may be original and some repainted, so a test spot comes before a full wrap to check that the film will bond evenly. The hatchback and sedan share the same 51 ft (15.5 m) to 52 ft (16 m) film range as the later car. The tailgate glass is set into the panel on this body too, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Wave

A partial wrap on a Pontiac Wave can cover the roof, hood, or mirror caps without a full color change. The roof is a single panel that takes far less film than the 51 ft (15.5 m) of a full hatchback wrap. Wave chrome delete covers the window trim and badges with black film for a subtle change. Paint protection film on the front end is a clear film that guards the hood, bumper, and mirror caps from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Wave: body, cut-outs and film

A Pontiac Wave vinyl wrap has to cover the compact dimensions of a subcompact car with five doors or a sedan tail. The body length runs from 152.8 in (3,880 mm) to 169.7 in (4,310 mm) on the second generation, so the film amount stays close between styles. The hatchback and the sedan each take about 51 ft (15.5 m) to 52 ft (16 m) of 60-inch (1.52 m) cast film. That small range means a wrap installer can plan the same panel layout for either body with only minor changes at the rear.

Wave wrap ideas start with the tailgate, where the rear glass is set into the panel and the film ends at the edge of the glass. That design leaves the glass uncovered and keeps the wrap line clean around the window on both the first and second generation. The door handles and mirrors come off for a neat edge, and the badges are removed before the panel is wrapped. A windshield banner is not part of a full wrap, but it can be cut from the same film if you want that look.

When you count how much vinyl to wrap a Wave, the difference between the generations is in the sedan length and the chrome estimate. The first generation sedan is shorter at 166.7 in (4,235 mm), while the second reaches 169.7 in (4,310 mm), yet the film estimate for a solid color is the same 52 ft (16 m). Chrome or patterned film goes up to 61 ft (18.5 m) on the 2004–2006 body and 62 ft (19 m) on the 2006–2009 body. The hatchback length is unchanged between generations, so its 51 ft (15.5 m) figure applies to both.

Questions about wrapping a Pontiac Wave

How much vinyl does it take to wrap a Pontiac Wave?

A Pontiac Wave needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl for a hatchback and 52 ft (16 m) for a sedan, based on the newest body. Those figures are for a full color change wrap with the film laid edge to edge on every panel. A chrome or patterned film can add up to 10 ft (3 m) on the second generation. The estimate does not include film for the glass, which is left uncovered on the tailgate.

Which Wave body takes more film?

The Pontiac Wave sedan takes more film than the hatchback by about 1 ft (0.3 m) in a standard color. The sedan estimate is 52 ft (16 m) of 60-inch (1.52 m) cast film, and the hatchback is 51 ft (15.5 m). The difference comes from the longer rear of the sedan, which adds a little surface area. Both body styles are available in every generation of the Wave.

Can I wrap only the hood or the roof of a Wave?

Yes, a Pontiac Wave can get only the hood or the roof wrapped as a partial job. The hood is a single panel that uses a fraction of the 51 ft (15.5 m) full wrap film amount. The roof is also a straightforward panel, and it can be done in a contrasting color. A partial wrap is a good way to change the look without covering the whole car.

Is a Wave hard to wrap?

A Wave is a mid-level job to wrap because the tailgate has the rear glass set into the panel, so the film ends at the edge of the glass. That leaves a clean line, but the installer has to cut precisely around the window. The short body length of 152.8 in (3,880 mm) to 169.7 in (4,310 mm) keeps the film amount to about 51 ft (15.5 m), which is manageable. The door handles and mirrors come off for a better finish, which adds a little work.