Wraps by car

Pontiac Sunbird wrap

The Pontiac Sunbird wrap page covers all three generations, from the 1975–1980 first generation to the 1988–1994 third generation. A vinyl wrap on the newest body, the 1988–1994 sedan, takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The older coupes and hatchbacks need slightly less material.

3generations15.5 mof film for a full wrap

Pontiac Sunbird, third generation, factory photo
Pontiac Sunbird, third generation. Factory color shown.

Pontiac Sunbird wrap colors and ideas

  • Sunbird black wrap
  • Sunbird white wrap
  • Sunbird gray wrap
  • Sunbird silver wrap
  • Sunbird red wrap
  • Sunbird blue wrap
  • Sunbird green wrap
  • Sunbird yellow wrap
  • Sunbird orange wrap
  • Sunbird purple wrap
  • Sunbird pink wrap
  • Sunbird teal wrap
  • Sunbird brown wrap
  • Sunbird gold wrap
  • Sunbird chrome wrap
  • Sunbird color shift wrap
  • Sunbird carbon fiber wrap
  • Sunbird camo and patterned wrap

How much vinyl to wrap a Pontiac Sunbird

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1994sedan (4 doors)180.7 in (4,590 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1981–1988coupe (2 doors)169.7 in (4,310 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1975–1980coupe, hatchback (2 or 3 doors)178.0 in (4,520 mm) to 179.1 in (4,550 mm)about 48 ft (14.5 m) for the coupe to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Sunbird wrap cost factors

Sunbird wrap cost depends on the generation, body style, and condition of the paint. The first generation can be a coupe or hatchback, with lengths from 178.0 in (4,520 mm) to 179.1 in (4,550 mm). The second generation coupe is the shortest at 169.7 in (4,310 mm), and the third generation sedan is the longest at 180.7 in (4,590 mm).

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Sunbird wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Sunbird, third generation, factory photo
Factory color shown

1988–1994 Sunbird sedan (third generation)

1988–1994sedan (4 doors)180.7 in (4,590 mm)

The third generation Sunbird from 1988–1994 is a four-door sedan, the only generation offered as a sedan. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The sedan has four doors and a trunk lid, which means more cut-outs for handles and trim than on a coupe.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Pontiac Sunbird, second generation, factory photo
Factory color shown

1981–1988 Sunbird coupe (second generation)

1981–1988coupe (2 doors)169.7 in (4,310 mm)

The second generation Sunbird from 1981–1988 is a two-door coupe with a length of 169.7 in (4,310 mm). This compact body needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The two long side doors are each one large piece of film, which requires careful handling.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Pontiac Sunbird, first generation, factory photo
Factory color shown

1975–1980 Sunbird coupe, hatchback (first generation)

1975–1980coupe, hatchback (2 or 3 doors)178.0 in (4,520 mm) to 179.1 in (4,550 mm)

The first generation Sunbird from 1975–1980 came as a coupe or hatchback, with two or three doors. The style decides the panel plan and the film amount: the coupe takes about 48 ft (14.5 m) and the hatchback about 49 ft (15 m) of 60-inch (1.52 m) cast film. The hatchback tailgate includes the rear glass, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the coupe to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Sunbird

For a smaller job, a partial wrap on a Sunbird can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also an option: clear film applied to the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Sunbird: body, cut-outs and film

The Pontiac Sunbird vinyl wrap is a compact car project, with body lengths from 169.7 in (4,310 mm) to 180.7 in (4,590 mm). The third generation is a four-door sedan, which adds door seams and trim pieces compared with the two-door coupes. The first generation offers a hatchback with a tailgate that includes the rear glass, changing how film is trimmed at the rear.

Sunbird wrap ideas should account for parts that need cut-outs or removal. On the second generation coupe, each of the two long side doors is one large piece of film, so the installer must handle a big panel. The first generation hatchback tailgate has the rear glass in it, and the film ends at the edge of the glass.

If you are counting how much vinyl to wrap a Sunbird, the generation matters. The first generation coupe takes about 48 ft (14.5 m) and the hatchback about 49 ft (15 m) of 60-inch (1.52 m) cast film. The second generation coupe takes about 46 ft (14 m), while the third generation sedan takes about 51 ft (15.5 m).

Questions about wrapping a Pontiac Sunbird

How much vinyl does it take to wrap a Pontiac Sunbird?

Yes, a full wrap on a Pontiac Sunbird takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body, the 1988–1994 sedan. The second generation coupe takes about 46 ft (14 m), and the first generation coupe or hatchback takes about 48–49 ft (14.5–15 m).

Can I wrap only the hood or the roof of a Sunbird?

Yes, you can wrap only the hood or the roof of a Sunbird. A partial wrap can cover any individual panel, such as the hood, roof, or mirror caps. Many owners also choose a chrome delete for the window trim and badges. Paint protection film (PPF) is another partial option, with clear film on the front end.

Is a Sunbird hard to wrap?

A Sunbird is not hard to wrap, but some features add work. On the second generation coupe, the two long side doors are each one large piece of film, requiring careful handling. The first generation hatchback has a tailgate with the rear glass in it, and the film ends at the edge of the glass.

How many generations of the Sunbird does this page cover?

This page covers three generations of the Sunbird: the first generation from 1975–1980, the second generation from 1981–1988, and the third generation from 1988–1994. Each generation has different body styles and film requirements.