Wraps by car

Pontiac Torpedo wrap

The Pontiac Torpedo wrap is a color change or paint protection for the 1939–1948 four-door sedan. This page covers one generation of the Torpedo. A full wrap of this body takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations20 mof film for a full wrap

Pontiac Torpedo, first generation, factory photo
Pontiac Torpedo, first generation. Factory color shown.

Pontiac Torpedo wrap colors and ideas

  • Torpedo black wrap
  • Torpedo white wrap
  • Torpedo gray wrap
  • Torpedo silver wrap
  • Torpedo red wrap
  • Torpedo blue wrap
  • Torpedo green wrap
  • Torpedo yellow wrap
  • Torpedo orange wrap
  • Torpedo purple wrap
  • Torpedo pink wrap
  • Torpedo teal wrap
  • Torpedo brown wrap
  • Torpedo gold wrap
  • Torpedo chrome wrap
  • Torpedo color shift wrap
  • Torpedo carbon fiber wrap
  • Torpedo camo and patterned wrap

How much vinyl to wrap a Pontiac Torpedo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1939–1948sedan (4 doors)208.7 in (5,300 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Torpedo wrap cost factors

Torpedo wrap cost depends on the condition of the paint, because a car from 1939–1948 may have original or repainted panels. The installer must test a small area first, and any paint repair adds time. The size of the car also matters, since 208.7 in (5,300 mm) of body takes a full roll of film. A partial job on only the hood or roof costs less in material and labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Torpedo wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Torpedo, first generation, factory photo
Factory color shown

1939–1948 Torpedo sedan (first generation)

1939–1948sedan (4 doors)208.7 in (5,300 mm)

The first generation Pontiac Torpedo ran from 1939 to 1948 as a four-door sedan. The paint on these cars may be original or repainted, so a test spot comes before a full wrap to check adhesion. The body length of 208.7 in (5,300 mm) means you need long sections of film. A full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) cast film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Torpedo

Beyond a full wrap, a partial wrap on the Torpedo can cover the roof, hood, or mirror caps. A Torpedo chrome delete means black film on the window trim and badges. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Torpedo: body, cut-outs and film

A Pontiac Torpedo vinyl wrap covers the sedan body that is 208.7 in (5,300 mm) long. The four doors and large side panels mean the installer works with long, straight sections of film. The wrap needs careful trimming around the door handles and hinges.

Torpedo wrap ideas start with the bright trim, because the grille, window surrounds, and badges benefit from a chrome delete. The door handles can stay in place, but the installer may remove the mirrors for a cleaner edge. The front and rear bumpers are not wrapped, because they take too much impact.

If you want to know how much vinyl to wrap a Torpedo, the estimate is about 66 ft (20 m) of 60-inch (1.52 m) film for the only generation. The 1939–1948 body kept the same shape, so the figure stays the same for all years. Add extra film if you choose a chrome or patterned film, about 74 ft (22.5 m).

Questions about wrapping a Pontiac Torpedo

How much vinyl does it take to wrap a Pontiac Torpedo?

A full wrap of a Pontiac Torpedo takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl film. For chrome or patterned film, plan for about 74 ft (22.5 m). The first generation sedan is the only body covered on this page.

Can I wrap only the hood or the roof of a Torpedo?

Yes, you can wrap only the hood or the roof of a Torpedo as a partial wrap. The roof and hood are flat enough for a clean single-piece application. You can also choose mirror caps or a chrome delete on the window trim and badges.

Is a Torpedo hard to wrap?

A Torpedo is not the easiest car to wrap because its body is 208.7 in (5,300 mm) long. The large flat panels need long pieces of film, which are harder to handle without creasing. The bright trim and door handles require careful cutting and tucking.

How many generations of the Torpedo does this page cover?

This page covers one generation of the Pontiac Torpedo, produced from 1939 to 1948. The single body style is a four-door sedan. All wrap estimates on this page refer to that generation.