Wraps by car

Oldsmobile Alero wrap

The Oldsmobile Alero wrap covers the full mid-size car with vinyl wrap film. This catalog has one generation, made from 1999 to 2004. A full wrap of the newest body takes about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, using 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Oldsmobile Alero, first generation, factory photo
Oldsmobile Alero, first generation. Factory color shown.

Oldsmobile Alero wrap colors and ideas

  • Alero black wrap
  • Alero white wrap
  • Alero gray wrap
  • Alero silver wrap
  • Alero red wrap
  • Alero blue wrap
  • Alero green wrap
  • Alero yellow wrap
  • Alero orange wrap
  • Alero purple wrap
  • Alero pink wrap
  • Alero teal wrap
  • Alero brown wrap
  • Alero gold wrap
  • Alero chrome wrap
  • Alero color shift wrap
  • Alero carbon fiber wrap
  • Alero camo and patterned wrap

How much vinyl to wrap an Oldsmobile Alero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2004coupe, sedan (2 or 4 doors)186.7 in (4,742 mm)about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Alero wrap cost factors

Alero wrap cost depends on the size of the car and the film you choose. The Alero is a mid-size car with a length of 186.7 in (4,742 mm), so it uses about 52 ft (16 m) of 60-inch (1.52 m) film for a full wrap. The coupe is slightly smaller and may need a little less film. Labor also depends on the condition of the paint and how much trim has to be removed.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: coupe, sedan (2 or 4 doors).

Alero wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Alero, first generation, factory photo
Factory color shown

1999–2004 Alero coupe, sedan (first generation)

1999–2004coupe, sedan (2 or 4 doors)186.7 in (4,742 mm)

The first generation Oldsmobile Alero, made from 1999 to 2004, comes as a coupe or sedan. The style decides the panel plan and the film amount. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) film, while the sedan needs about 52 ft (16 m). Both have the same length, so the extra film is for the two rear doors.

Film: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Alero

An Alero partial wrap can cover the roof, hood, or mirror caps instead of the whole car. A chrome delete on an Alero covers the window trim and badges with black film. Paint protection film (PPF) on the front end keeps the bumper, hood, and fenders safe from stone chips. These smaller jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Alero: body, cut-outs and film

The Oldsmobile Alero vinyl wrap work follows the two body styles of the car. The coupe and sedan share a length of 186.7 in (4,742 mm), so the main panels are close in size. The sedan has four doors and a fixed roof section, which adds a little film over the coupe. The coupe has longer doors and a cleaner rear quarter, which changes how the film is cut.

Alero wrap ideas start with the parts that need cut-outs or come off. The door handles, mirrors, antenna base, and badges must be removed or trimmed around. The front and rear bumpers need relief cuts for fog lights, tow hook covers, and plate areas. The rocker panels and lower doors take extra care because they catch dirt.

How much vinyl to wrap an Alero depends on the generation, but this car has only one generation. The 1999–2004 coupe and sedan keep the same body shape through the years. A wrapper counting film can use the same panel plan for any Alero of that period. The only real difference is between the coupe and sedan bodies.

Questions about wrapping an Oldsmobile Alero

How much vinyl does it take to wrap an Oldsmobile Alero?

About 51 to 52 ft (15.5 to 16 m) of vinyl does it take to wrap an Oldsmobile Alero. A coupe takes about 51 ft (15.5 m) of 60-inch (1.52 m) film, and a sedan takes about 52 ft (16 m). This is for a full color change wrap with no extra film for mistakes.

Which Alero body takes more film?

The sedan takes more film than the coupe. The Alero sedan needs about 52 ft (16 m) of 60-inch (1.52 m) film, while the coupe needs about 51 ft (15.5 m). The extra foot comes from the two rear doors on the sedan.

Can I wrap only the hood or the roof of an Alero?

Yes, you can wrap only the hood or the roof of an Alero. A hood wrap on an Alero is a partial wrap that covers just that panel. A roof wrap is also listed as a partial job. These jobs use far less film than a full wrap.

Is an Alero hard to wrap?

Yes, an Alero is a bit harder to wrap than a small car. Its length of 186.7 in (4,742 mm) means long panels that can stretch film. The bumpers and door handles need cut-outs and removal, which adds work. With patience and a heat gun, it is manageable.