Wraps by car

Oldsmobile Omega wrap

This page covers the Oldsmobile Omega wrap for the compact sedan. The Omega appears here in two generations: 1980–1984 and 1975–1979. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

2generations15.5 mof film for a full wrap

Oldsmobile Omega, third generation, factory photo
Oldsmobile Omega, third generation. Factory color shown.

Oldsmobile Omega wrap colors and ideas

  • Omega black wrap
  • Omega white wrap
  • Omega gray wrap
  • Omega silver wrap
  • Omega red wrap
  • Omega blue wrap
  • Omega green wrap
  • Omega yellow wrap
  • Omega orange wrap
  • Omega purple wrap
  • Omega pink wrap
  • Omega teal wrap
  • Omega brown wrap
  • Omega gold wrap
  • Omega chrome wrap
  • Omega color shift wrap
  • Omega carbon fiber wrap
  • Omega camo and patterned wrap

How much vinyl to wrap an Oldsmobile Omega

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1984sedan (4 doors)181.8 in (4,618 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1975–1979sedan (4 doors)——

Omega wrap cost factors

Omega wrap cost depends on the film, the condition of the paint, and the amount of disassembly. The 1980–1984 sedan needs about 51 ft (15.5 m) of film for a full wrap. Paint repair before wrapping adds labor and materials, and a matte film hides fewer flaws than a gloss film. Removing the door handles and trim adds time, while a simple color change without disassembly keeps the job shorter.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Omega wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Omega, third generation, factory photo
Factory color shown

1980–1984 Omega sedan (third generation)

1980–1984sedan (4 doors)181.8 in (4,618 mm)

The 1980–1984 Oldsmobile Omega shares the compact X-body platform with the Chevrolet Citation. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. The body is 181.8 in (4,618 mm) long with four doors, and the film estimate is about 51 ft (15.5 m) of cast vinyl. Rust repair on the lower doors or rear wheel arches can change the amount of prep work.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Oldsmobile Omega, second generation, factory photo
Factory color shown

1975–1979 Omega sedan (second generation)

1975–1979sedan (4 doors)

The 1975–1979 Oldsmobile Omega is a compact sedan with similar dimensions to the later car. The size and the four-door style mean the panel count is the same, and the film need is close to 51 ft (15.5 m) for a full wrap. The earlier car has more chrome trim around the windows and grille, which adds cut-out work. The rear side windows are fixed, so there is no extra film needed for window frames.

Roof, hood, chrome delete and PPF on an Omega

The Oldsmobile Omega also suits partial wrap jobs like the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end uses a clear film to guard against stone chips. These smaller jobs let you change the look of the car without wrapping the whole body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Omega: body, cut-outs and film

The Oldsmobile Omega vinyl wrap suits the car's compact sedan body. The 1980–1984 generation is 181.8 in (4,618 mm) long, a size that keeps the panel count moderate. A four-door sedan wrap includes the roof, hood, trunk, doors, fenders, and bumpers. The film estimate assumes a standard solid-color vinyl without roof seams.

Omega wrap ideas should account for the trim and badges on this sedan. Window trim and door handles need precise cut-outs, and the badges come off for a clean chrome delete. The door mirrors can stay on or come off depending on the installer's preference. The front bumper has no separate lip on most Omega trims, which simplifies the lower edge.

How much vinyl to wrap an Omega depends on the generation and the film type. The 1980–1984 body uses about 51 ft (15.5 m) of standard film because of its 181.8 in (4,618 mm) length. The 1975–1979 body is nearly the same size, so the film need is similar. Chrome or patterned vinyl adds about 13 ft (4 m) to the total for pattern matching.

Questions about wrapping an Oldsmobile Omega

How much vinyl does it take to wrap an Oldsmobile Omega?

A full wrap of an Oldsmobile Omega takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the 1980–1984 body. Chrome or patterned film takes more, about 64 ft (19.5 m), because of the extra material needed for matching. The 1975–1979 body needs a similar amount since it is nearly the same size.

Can I wrap only the hood or the roof of an Omega?

Yes, you can wrap only the hood or the roof of an Omega. The hood is a single panel that takes a few square meters of film, and the roof is also a straightforward panel. Mirror caps are another small partial wrap job. These jobs cost less than a full wrap because they use less film and less labor.

Is an Omega hard to wrap?

An Omega is not hard to wrap, but the trim and the age of the paint add work. The window trim and badges need careful cutting or removal, and the doors have a character line that needs proper squeegee work. The car's compact size keeps the panel count low, and the film estimate is about 51 ft (15.5 m) for the newest body.

How many generations of the Omega does this page cover?

This page covers two generations of the Omega: 1980–1984 and 1975–1979. Both are compact sedans with four doors, and the wrap film amount is nearly the same for each.