Wraps by car

Oldsmobile Cutlass Supreme wrap

This page covers the Oldsmobile Cutlass Supreme wrap across one generation, the 1988–1997 mid-size convertible, coupe, and sedan. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 67 ft (20.5 m).

1generations15.5 mof film for a full wrap

Oldsmobile Cutlass Supreme, first generation, factory photo
Oldsmobile Cutlass Supreme, first generation. Factory color shown.

Oldsmobile Cutlass Supreme wrap colors and ideas

  • Cutlass Supreme black wrap
  • Cutlass Supreme white wrap
  • Cutlass Supreme gray wrap
  • Cutlass Supreme silver wrap
  • Cutlass Supreme red wrap
  • Cutlass Supreme blue wrap
  • Cutlass Supreme green wrap
  • Cutlass Supreme yellow wrap
  • Cutlass Supreme orange wrap
  • Cutlass Supreme purple wrap
  • Cutlass Supreme pink wrap
  • Cutlass Supreme teal wrap
  • Cutlass Supreme brown wrap
  • Cutlass Supreme gold wrap
  • Cutlass Supreme chrome wrap
  • Cutlass Supreme color shift wrap
  • Cutlass Supreme carbon fiber wrap
  • Cutlass Supreme camo and patterned wrap

How much vinyl to wrap an Oldsmobile Cutlass Supreme

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1997convertible, coupe, sedan (2 or 4 doors)192.1 in (4,880 mm) to 193.7 in (4,921 mm)about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Cutlass Supreme wrap cost factors

The Cutlass Supreme wrap cost depends on the size of the body and the film you choose. The sedan needs more material than the convertible, and chrome or patterned film adds up to about 13 ft (4 m) over a standard color change wrap. Installation time also changes with the number of cut-outs and how much trim comes off the car. A partial wrap or chrome delete costs less than a full body wrap because it uses less film and labor.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cutlass Supreme wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Cutlass Supreme, first generation, factory photo
Factory color shown

1988–1997 Cutlass Supreme convertible, coupe, sedan (first generation)

1988–1997convertible, coupe, sedan (2 or 4 doors)192.1 in (4,880 mm) to 193.7 in (4,921 mm)

On the open top of the 1988–1997 Cutlass Supreme, a fabric top is not wrapped and the film ends where the top begins. The vinyl stops at the edge of the convertible roof opening so the soft top keeps its original look and function. If the car has a folding hard top, that top is wrapped as separate panels of its own. This keeps the film from being cut or stretched when the top folds.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Cutlass Supreme

For a partial wrap on an Oldsmobile Cutlass Supreme, the roof, hood, and mirror caps are the jobs most often done. A Cutlass Supreme chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be matched to the body color or left clear.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Cutlass Supreme: body, cut-outs and film

An Oldsmobile Cutlass Supreme vinyl wrap has to follow the body styles and sizes of the car. The convertible, coupe, and sedan share the same mid-size platform but differ in length from 192.1 in (4,880 mm) to 193.7 in (4,921 mm), so the film estimate changes with the body. The sedan uses the most material because it has a fixed roof and four doors, while the convertible needs less film on the upper body. Plan the wrap around the exact body style to avoid running short on film.

Cutlass Supreme wrap ideas start with the parts that need cut-outs or come off for a clean install. Door handles, mirrors, and trim pieces are removed where possible so the film wraps around edges without lifting. The convertible body has a fabric top that is not wrapped, and the film ends where the top begins. A folding hard top, when fitted, is wrapped as panels of its own.

To know how much vinyl to wrap a Cutlass Supreme, you count the differences between the generations, but this catalog lists one generation only. The 1988–1997 bodies share the same film estimate range, so the main variable is body style, not year. The convertible uses about 51 ft (15.5 m) and the sedan about 54 ft (16.5 m) with 60-inch (1.52 m) cast film. For chrome or patterned film, allow up to about 67 ft (20.5 m) on any body.

Questions about wrapping an Oldsmobile Cutlass Supreme

How much vinyl does it take to wrap an Oldsmobile Cutlass Supreme?

Yes, a full wrap of an Oldsmobile Cutlass Supreme takes about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, using 60-inch (1.52 m) cast film. For chrome or patterned film, allow up to about 67 ft (20.5 m). The exact amount depends on the body style and how much trim is removed.

Is the top of a Cutlass Supreme wrapped?

No, the top of a Cutlass Supreme is not wrapped if it is a fabric convertible top. The film ends where the fabric begins, so the soft top keeps its original color and texture. A folding hard top, when fitted, is wrapped as panels of its own.

Which Cutlass Supreme body takes more film?

The sedan body of the Cutlass Supreme takes more film than the convertible or coupe. The sedan needs about 54 ft (16.5 m) of cast film, while the convertible uses about 51 ft (15.5 m). The coupe falls between the two depending on its roof and door count.

Can I wrap only the hood or the roof of a Cutlass Supreme?

Yes, you can wrap only the hood or the roof of a Cutlass Supreme as a partial wrap. A vinyl shop can also wrap the mirror caps or do a chrome delete on the window trim and badges. Clear paint protection film (PPF) on the front end is another partial option. These smaller jobs let you change the look without a full wrap.