Wraps by car

Oldsmobile Cutlass Ciera wrap

The Oldsmobile Cutlass Ciera wrap page covers the single generation built from 1981 to 1996. A full vinyl wrap takes about 51 ft (15.5 m) for the coupe and up to 59 ft (18 m) for the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 76 ft (23 m) for the same body.

1generations15.5 mof film for a full wrap

Oldsmobile Cutlass Ciera, first generation, factory photo
Oldsmobile Cutlass Ciera, first generation. Factory color shown.

Oldsmobile Cutlass Ciera wrap colors and ideas

  • Cutlass Ciera black wrap
  • Cutlass Ciera white wrap
  • Cutlass Ciera gray wrap
  • Cutlass Ciera silver wrap
  • Cutlass Ciera red wrap
  • Cutlass Ciera blue wrap
  • Cutlass Ciera green wrap
  • Cutlass Ciera yellow wrap
  • Cutlass Ciera orange wrap
  • Cutlass Ciera purple wrap
  • Cutlass Ciera pink wrap
  • Cutlass Ciera teal wrap
  • Cutlass Ciera brown wrap
  • Cutlass Ciera gold wrap
  • Cutlass Ciera chrome wrap
  • Cutlass Ciera color shift wrap
  • Cutlass Ciera carbon fiber wrap
  • Cutlass Ciera camo and patterned wrap

How much vinyl to wrap an Oldsmobile Cutlass Ciera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1996coupe, sedan, wagon (2 or 4 or 5 doors)190.3 in (4,834 mm) to 194.3 in (4,935 mm)about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Cutlass Ciera wrap cost factors

Cutlass Ciera wrap cost depends first on the body style, because a 59 ft (18 m) wagon takes more film than a 51 ft (15.5 m) coupe. The film itself is a large part of the cost, and 60-inch (1.52 m) cast film costs more than a basic film. Chrome or patterned film drives up the cost as well as the amount to about 76 ft (23 m). The installer may charge more for the wagon tailgate glass edge, which takes extra trimming.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: coupe, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Cutlass Ciera wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Cutlass Ciera, first generation, factory photo
Factory color shown

1981–1996 Cutlass Ciera coupe, sedan, wagon (first generation)

1981–1996coupe, sedan, wagon (2 or 4 or 5 doors)190.3 in (4,834 mm) to 194.3 in (4,935 mm)

The first generation Oldsmobile Cutlass Ciera came as a coupe, a sedan, or a wagon, and the style decides the panel plan. A coupe has two long doors and no fixed window frames to work around. The sedan adds two rear doors, which means four door handles and four window trims to cut out. The wagon has a fifth door and the rear glass set into the tailgate, so the plan for the rear panel changes.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Cutlass Ciera

A partial wrap on an Oldsmobile Cutlass Ciera can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is often put on the front end to guard against stone chips. These jobs use less film than a full wrap and follow the same panel plan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Cutlass Ciera: body, cut-outs and film

An Oldsmobile Cutlass Ciera vinyl wrap follows the three body styles offered: coupe, sedan, and wagon. The coupe is the shortest at 190.3 in (4,834 mm) and the wagon the longest at 194.3 in (4,935 mm), a difference of four inches. The wagon adds a large roof and a tailgate, so it needs the most film of the three. The sedan falls between them, with four doors adding more panel work than the coupe.

Cutlass Ciera wrap ideas include covering every panel except the tailgate glass. The tailgate has the rear glass set into it, and the film ends at the edge of that glass. Door handles, mirrors, and badges need cut-outs, and the door handles come off for a cleaner finish. The roof rails on the wagon can be wrapped only if they are removed first.

When you figure how much vinyl to wrap a Cutlass Ciera, the body style is the deciding factor. The coupe needs about 51 ft (15.5 m), the sedan a little more, and the wagon about 59 ft (18 m). The extra length of the wagon is all in the roof and the tailgate. Switching to chrome or patterned film can push the total to about 76 ft (23 m).

Questions about wrapping an Oldsmobile Cutlass Ciera

How much vinyl does it take to wrap an Oldsmobile Cutlass Ciera?

A full Oldsmobile Cutlass Ciera vinyl wrap takes about 51 ft (15.5 m) for the coupe and up to 59 ft (18 m) for the wagon, with 60-inch (1.52 m) cast film. The estimate assumes a single color with no pattern to match. Extra film is needed for mistakes or for wrapping the door jambs.

Which Cutlass Ciera body takes more film?

The wagon takes more film than the coupe or the sedan on an Oldsmobile Cutlass Ciera. A coupe needs about 51 ft (15.5 m), while the wagon needs about 59 ft (18 m). The wagon body is about 4 inches longer, 194.3 in (4,935 mm) versus 190.3 in (4,834 mm) for the coupe. The wagon also has a larger roof panel and a tailgate.

Can I wrap only the hood or the roof of a Cutlass Ciera?

Yes, you can wrap only the hood or the roof of a Cutlass Ciera with a partial wrap. Roof-only wraps cover just the top panel, and hood-only wraps cover the front panel. Mirror caps are another small job that many owners choose. A partial wrap uses less film and can be finished faster than a full wrap.

Is a Cutlass Ciera hard to wrap?

A Cutlass Ciera is not hard to wrap, but the wagon tailgate adds work. The rear glass is set into the tailgate, so the film must be trimmed right at the edge of the glass. The body is a mid-size, with a length from 190.3 in (4,834 mm) to 194.3 in (4,935 mm), so the panels are manageable. Coupes with frameless windows can be trickier around the side glass.