Wraps by car

Oldsmobile Series 70 wrap

The Oldsmobile Series 70 wrap page covers three generations from 1939 to 1950, including wagon and coupe bodies. A full vinyl wrap of the newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. The data here helps you plan film quantities, partial jobs, and the work each body style needs.

3generations22.5 mof film for a full wrap

Oldsmobile Series 70, third generation, factory photo
Oldsmobile Series 70, third generation. Factory color shown.

Oldsmobile Series 70 wrap colors and ideas

  • Series 70 black wrap
  • Series 70 white wrap
  • Series 70 gray wrap
  • Series 70 silver wrap
  • Series 70 red wrap
  • Series 70 blue wrap
  • Series 70 green wrap
  • Series 70 yellow wrap
  • Series 70 orange wrap
  • Series 70 purple wrap
  • Series 70 pink wrap
  • Series 70 teal wrap
  • Series 70 brown wrap
  • Series 70 gold wrap
  • Series 70 chrome wrap
  • Series 70 color shift wrap
  • Series 70 carbon fiber wrap
  • Series 70 camo and patterned wrap

How much vinyl to wrap an Oldsmobile Series 70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1950wagon (5 doors)214.0 in (5,436 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
1941–1948coupe (2 doors)211.0 in (5,359 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1939–1940coupe (2 doors)197.0 in (5,004 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Series 70 wrap cost factors

A Series 70 wrap cost depends on the film amount, body size, and the number of parts to remove. The third generation wagon needs more film than the coupes, so it costs more in material. Paint condition also matters because a test spot on aged or repainted panels may be needed before a full wrap. The coupe generations use less film, which lowers the material part of the job.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Series 70 wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Series 70, third generation, factory photo
Factory color shown

1949–1950 Series 70 wagon (third generation)

1949–1950wagon (5 doors)214.0 in (5,436 mm)

The third generation Oldsmobile Series 70 from 1949–1950 uses a wagon body with a tailgate that has the rear glass in it. This means the film ends at the edge of the glass, so the installer must cut precisely around the glass. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the film will stick well to the old paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Oldsmobile Series 70, second generation, factory photo
Factory color shown

1941–1948 Series 70 coupe (second generation)

1941–1948coupe (2 doors)211.0 in (5,359 mm)

The second generation Oldsmobile Series 70 from 1941–1948 is a coupe with two long side doors. Each door is one large piece of film, so the installer needs a large, clean area to lay the film. The body length of 211.0 in (5,359 mm) means the film must be cut in long panels without wrinkles.

Two long side doors: each door is one large piece of film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Oldsmobile Series 70, first generation, factory photo
Factory color shown

1939–1940 Series 70 coupe (first generation)

1939–1940coupe (2 doors)197.0 in (5,004 mm)

The first generation Oldsmobile Series 70 from 1939–1940 is a coupe with two long side doors. Each door is one large piece of film, which requires careful handling to avoid creases. Its shorter length of 197.0 in (5,004 mm) means slightly less film than the later coupe.

Two long side doors: each door is one large piece of film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Series 70

Partial wrap options for the Series 70 include the roof, hood, and mirror caps. Series 70 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs let you change the look or protect the paint without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Series 70: body, cut-outs and film

An Oldsmobile Series 70 vinyl wrap changes with the body style because the wagon is longer than the coupes. The third generation wagon measures 214.0 in (5,436 mm), while the first generation coupe is 197.0 in (5,004 mm) long. A longer body needs more film and more time to cover every panel. The wagon's five-door layout also adds more seams and edges to work around.

Series 70 wrap ideas should account for parts that need cut-outs or come off the car. On the third generation wagon, the tailgate has the rear glass in it, so the film ends at the edge of the glass. The coupes of the first and second generations have two long side doors, and each door is one large piece of film. Any other trim or badges must be removed before the film goes on.

How much vinyl to wrap a Series 70 depends on the generation you have. The first generation coupe needs about 62 ft (19 m) of 60-inch (1.52 m) cast film, while the second generation coupe needs about 66 ft (20 m). The third generation wagon needs about 74 ft (22.5 m) of the same film. If you choose chrome or patterned film, add about 8 ft (2.5 m) to each estimate.

Questions about wrapping an Oldsmobile Series 70

How much vinyl does it take to wrap an Oldsmobile Series 70?

About 74 ft (22.5 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Oldsmobile Series 70 wagon body. That estimate is for the third generation wagon from 1949–1950. For coupes, the amount is lower: 66 ft (20 m) for the second generation and 62 ft (19 m) for the first.

Can I wrap only the hood or the roof of a Series 70?

Yes, you can wrap only the hood or the roof of a Series 70. The partial wrap options include the roof, hood, and mirror caps, as well as chrome delete and paint protection film on the front end.

Is a Series 70 hard to wrap?

A Series 70 is not especially hard to wrap, but it has some points that add work. The wagon tailgate has the rear glass in it, so the film must end at the edge of the glass. The coupe doors are large single pieces of film, which can be tricky to handle. The car's age may also require a paint test spot before wrapping.

How many generations of the Series 70 does this page cover?

This page covers three generations of the Oldsmobile Series 70. They are the first generation (1939–1940), second generation (1941–1948), and third generation (1949–1950). Each generation has its own film estimate and wrap notes.