Wraps by car

Oldsmobile Cutlass wrap

The Oldsmobile Cutlass wrap page covers six generations of the Cutlass, from 1964 to 1999. A full vinyl wrap of the newest body, the sixth generation sedan, takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that body needs about 67 ft (20.5 m).

6generations16.5 mof film for a full wrap

Oldsmobile Cutlass, sixth generation, factory photo
Oldsmobile Cutlass, sixth generation. Factory color shown.

Oldsmobile Cutlass wrap colors and ideas

  • Cutlass black wrap
  • Cutlass white wrap
  • Cutlass gray wrap
  • Cutlass silver wrap
  • Cutlass red wrap
  • Cutlass blue wrap
  • Cutlass green wrap
  • Cutlass yellow wrap
  • Cutlass orange wrap
  • Cutlass purple wrap
  • Cutlass pink wrap
  • Cutlass teal wrap
  • Cutlass brown wrap
  • Cutlass gold wrap
  • Cutlass chrome wrap
  • Cutlass color shift wrap
  • Cutlass carbon fiber wrap
  • Cutlass camo and patterned wrap

How much vinyl to wrap an Oldsmobile Cutlass

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–1999sedan (4 doors)192.1 in (4,880 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1978–1988coupe, sedan (4 doors)197.7 in (5,022 mm) to 199.1 in (5,057 mm)about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1973–1977coupe, sedan, wagon (2 or 4 or 5 doors)——
1968–1972convertible, coupe (2 doors)201.9 in (5,128 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1964–1967convertible, coupe (2 doors)——
1961–1963coupe (2 doors)——

Cutlass wrap cost factors

Cutlass wrap cost depends on the generation, body style, and film type for this car. The sixth generation sedan takes about 54 ft (16.5 m) of 60-inch cast film, while chrome or patterned film raises the amount to about 67 ft (20.5 m). A fifth generation coupe needs about 54 ft (16.5 m), and a sedan about 56 ft (17 m). The third generation convertible or coupe takes about 54 ft (16.5 m) of cast film, or about 69 ft (21 m) with chrome or patterned film.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Cutlass wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Cutlass, sixth generation, factory photo
Factory color shown

1997–1999 Cutlass sedan (sixth generation)

1997–1999sedan (4 doors)192.1 in (4,880 mm)

The sixth generation Oldsmobile Cutlass was produced from 1997 to 1999 as a four-door sedan. It is 192.1 in (4,880 mm) long, and a full wrap takes about 54 ft (16.5 m) of 60-inch cast film. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Oldsmobile Cutlass, fifth generation, factory photo
Factory color shown

1978–1988 Cutlass coupe, sedan (fifth generation)

1978–1988coupe, sedan (4 doors)197.7 in (5,022 mm) to 199.1 in (5,057 mm)

The fifth generation Oldsmobile Cutlass was produced from 1978 to 1988 in coupe and sedan body styles. The coupe takes about 54 ft (16.5 m) of 60-inch cast film, and the sedan about 56 ft (17 m). Lengths range from 197.7 in (5,022 mm) to 199.1 in (5,057 mm), so the style decides the panel plan and the film amount.

Film: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Oldsmobile Cutlass, fourth generation, factory photo
Factory color shown

1973–1977 Cutlass coupe, sedan, wagon (fourth generation)

1973–1977coupe, sedan, wagon (2 or 4 or 5 doors)

The fourth generation Oldsmobile Cutlass was produced from 1973 to 1977 as a coupe, sedan, or wagon. The wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The size and body style affect the amount of film and the number of panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Oldsmobile Cutlass, third generation, factory photo
Factory color shown

1968–1972 Cutlass convertible, coupe (third generation)

1968–1972convertible, coupe (2 doors)201.9 in (5,128 mm)

The third generation Oldsmobile Cutlass was produced from 1968 to 1972 as a convertible or two-door coupe. A convertible body has a fabric top that is not wrapped, and the film ends where the top begins; a folding hard top is wrapped as panels of its own. The two long side doors are each wrapped as one large piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Oldsmobile Cutlass, second generation, factory photo
Factory color shown

1964–1967 Cutlass convertible, coupe (second generation)

1964–1967convertible, coupe (2 doors)

The second generation Oldsmobile Cutlass was produced from 1964 to 1967 as a convertible or two-door coupe. A convertible body has a fabric top that is not wrapped, and the film ends where the top begins; a folding hard top is wrapped as panels of its own. The two long side doors are each wrapped as one large piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Oldsmobile Cutlass, first generation, factory photo
Factory color shown

1961–1963 Cutlass coupe (first generation)

1961–1963coupe (2 doors)

Two long side doors: each door is one large piece of film.

Roof, hood, chrome delete and PPF on a Cutlass

A Cutlass chrome delete covers the window trim and badges with black film. A partial wrap on this car can be the roof, hood, or mirror caps. Paint protection film (PPF), a clear film, can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Cutlass: body, cut-outs and film

An Oldsmobile Cutlass vinyl wrap has to follow the body style and the length of each generation. The sixth generation is a four-door sedan 192.1 in (4,880 mm) long and uses about 54 ft (16.5 m) of film. The fifth generation came as a coupe or sedan, with lengths up to 199.1 in (5,057 mm), and its film amount runs from about 54 ft (16.5 m) to 56 ft (17 m).

Cutlass wrap ideas depend partly on the parts that have to come off or be cut around. On the third and second generations the two long side doors are each wrapped as one large piece of film. The fourth generation wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

How much vinyl to wrap a Cutlass changes with the generation and the body style. The sixth generation sedan takes about 54 ft (16.5 m) of 60-inch cast film. For the fifth generation, the coupe takes about 54 ft (16.5 m) and the sedan about 56 ft (17 m). The third generation, with only a convertible or coupe body, takes about 54 ft (16.5 m) of cast film.

Questions about wrapping an Oldsmobile Cutlass

How much vinyl does it take to wrap an Oldsmobile Cutlass?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap the newest Oldsmobile Cutlass, the sixth generation sedan. Chrome or patterned film on that body needs about 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Cutlass?

Yes, you can wrap only the hood or the roof of a Cutlass. A partial wrap can also be the mirror caps, or you can do a chrome delete on the window trim and badges. Paint protection film, a clear film, on the front end is another option.

Is a Cutlass hard to wrap?

A Cutlass can be hard to wrap because of its size and body style. The third and second generations have two long side doors, and each door is one large piece of film. The fourth generation wagon has a tailgate with the rear glass in it, so the film has to end at the edge of the glass.

How many generations of the Cutlass does this page cover?

This page covers six generations of the Oldsmobile Cutlass. The generations span from the second generation (1964–1967) to the sixth generation (1997–1999).