Wraps by car

Oldsmobile Bravada wrap

The Oldsmobile Bravada wrap page covers all three generations of this SUV, from 1990 to 2004. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 82 ft (25 m) for the same body.

3generations20 mof film for a full wrap

Oldsmobile Bravada, third generation, factory photo
Oldsmobile Bravada, third generation. Factory color shown.

Oldsmobile Bravada wrap colors and ideas

  • Bravada black wrap
  • Bravada white wrap
  • Bravada gray wrap
  • Bravada silver wrap
  • Bravada red wrap
  • Bravada blue wrap
  • Bravada green wrap
  • Bravada yellow wrap
  • Bravada orange wrap
  • Bravada purple wrap
  • Bravada pink wrap
  • Bravada teal wrap
  • Bravada brown wrap
  • Bravada gold wrap
  • Bravada chrome wrap
  • Bravada color shift wrap
  • Bravada carbon fiber wrap
  • Bravada camo and patterned wrap

How much vinyl to wrap an Oldsmobile Bravada

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2004SUV (5 doors)191.7 in (4,870 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1995–2001SUV (5 doors)183.5 in (4,660 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1990–1994SUV (5 doors)178.7 in (4,540 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Bravada wrap cost factors

Bravada wrap cost depends on the size of the body, the film type, and the labor for the tall roof and tailgate. A larger third generation takes more film than the second or first generation. Chrome or patterned film adds material because the pattern must be matched across panels. Removing trim and wrapping the roof from a platform also increase the amount of work.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Bravada wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Bravada, third generation, factory photo
Factory color shown

2001–2004 Bravada SUV (third generation)

2001–2004SUV (5 doors)191.7 in (4,870 mm)

The third-generation Oldsmobile Bravada is the largest of the three, at 191.7 in (4,870 mm) long and 72.0 in (1,830 mm) high. Its height means the roof is wrapped from a platform and takes more time. The tailgate with the rear glass requires the film to end at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Oldsmobile Bravada, second generation, factory photo
Factory color shown

1995–2001 Bravada SUV (second generation)

1995–2001SUV (5 doors)183.5 in (4,660 mm)

For a second-generation Oldsmobile Bravada, paint age is the first thing a wrapper checks. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body is 183.5 in (4,660 mm) long and needs about 61 ft (18.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Oldsmobile Bravada, first generation, factory photo
Factory color shown

1990–1994 Bravada SUV (first generation)

1990–1994SUV (5 doors)178.7 in (4,540 mm)

The first-generation Oldsmobile Bravada is the smallest, at 178.7 in (4,540 mm) long. Its five-door SUV body means a full wrap takes about 59 ft (18 m) of cast film. That is about seven fewer panels than the third generation, which makes it a shorter job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Bravada

A partial wrap on a Bravada can cover the roof, hood, and mirror caps. For a Bravada chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is clear film applied to the front end of any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Bravada: body, cut-outs and film

An Oldsmobile Bravada vinyl wrap follows the tall, five-door SUV body of every generation. The newest body is 191.7 in (4,870 mm) long and 72.0 in (1,830 mm) high, so the roof is wrapped from a platform. The first generation is smaller at 178.7 in (4,540 mm), which means less film and fewer panels to cover.

Bravada wrap ideas must account for the tailgate with the rear glass in it, because the film ends at the edge of the glass. On the third generation the tall body means the roof is wrapped from a platform, which adds labor. Removing door handles and mirrors gives cleaner edges on any Bravada.

To know how much vinyl to wrap a Bravada, compare the three generations by length. The first generation is 178.7 in (4,540 mm) and needs about 59 ft (18 m) of cast film. The second generation is longer at 183.5 in (4,660 mm) and takes about 61 ft (18.5 m). The third generation is 191.7 in (4,870 mm) and uses about 66 ft (20 m).

Questions about wrapping an Oldsmobile Bravada

How much vinyl does it take to wrap an Oldsmobile Bravada?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap the newest Oldsmobile Bravada. That figure covers the third generation from 2001 to 2004. Chrome or patterned film needs about 82 ft (25 m) for the same body.

Can I wrap only the hood or the roof of a Bravada?

Yes, you can wrap only the hood or the roof of a Bravada. A partial wrap can cover the roof, hood, and mirror caps. The roof is wrapped from a platform because the third generation is 72.0 in (1,830 mm) tall.

Is a Bravada hard to wrap?

A Bravada is not especially hard to wrap, but the tailgate with the rear glass adds a step because the film ends at the edge of the glass. On the third generation the tall body means the roof is wrapped from a platform, which adds labor. Otherwise the flat panels of an SUV make it a straightforward job.

How many generations of the Bravada does this page cover?

This page covers three generations of the Oldsmobile Bravada. They are the first generation from 1990 to 1994, the second from 1995 to 2001, and the third from 2001 to 2004.