Wraps by car

Oldsmobile Vista Cruiser wrap

This page covers the Oldsmobile Vista Cruiser wrap for all three generations of the wagon. A full vinyl wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. The first generation needs slightly less film because of its shorter body. The Vista Cruiser was produced from 1964 to 1977.

3generations23 mof film for a full wrap

Oldsmobile Vista Cruiser, third generation, factory photo
Oldsmobile Vista Cruiser, third generation. Factory color shown.

Oldsmobile Vista Cruiser wrap colors and ideas

  • Vista Cruiser black wrap
  • Vista Cruiser white wrap
  • Vista Cruiser gray wrap
  • Vista Cruiser silver wrap
  • Vista Cruiser red wrap
  • Vista Cruiser blue wrap
  • Vista Cruiser green wrap
  • Vista Cruiser yellow wrap
  • Vista Cruiser orange wrap
  • Vista Cruiser purple wrap
  • Vista Cruiser pink wrap
  • Vista Cruiser teal wrap
  • Vista Cruiser brown wrap
  • Vista Cruiser gold wrap
  • Vista Cruiser chrome wrap
  • Vista Cruiser color shift wrap
  • Vista Cruiser carbon fiber wrap
  • Vista Cruiser camo and patterned wrap

How much vinyl to wrap an Oldsmobile Vista Cruiser

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1973–1977wagon (5 doors)217.6 in (5,527 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1968–1972wagon (5 doors)217.6 in (5,527 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1964–1967wagon (5 doors)209.1 in (5,311 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Vista Cruiser wrap cost factors

Vista Cruiser wrap cost depends on the car's size, the film type, and the amount of bodywork preparation. A full wrap of the 217.6-inch body takes more material and labor than a partial job. Chrome delete on the window trim and badges adds separate work time. The condition of the paint also affects how much prep the panels need.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vista Cruiser wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Vista Cruiser, third generation, factory photo
Factory color shown

1973–1977 Vista Cruiser wagon (third generation)

1973–1977wagon (5 doors)217.6 in (5,527 mm)

The third generation Oldsmobile Vista Cruiser from 1973 to 1977 is the newest body this page covers. Paint age is a key factor because panels may be original or repainted. A test spot on each panel comes before a full wrap to check adhesion. The tailgate with the rear glass needs the film trimmed to the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Oldsmobile Vista Cruiser, second generation, factory photo
Factory color shown

1968–1972 Vista Cruiser wagon (second generation)

1968–1972wagon (5 doors)217.6 in (5,527 mm)

The second generation Oldsmobile Vista Cruiser from 1968 to 1972 has the same size as the third generation. The five-door wagon body means a large amount of film and many panels to cover. The roof, hood, and all doors are separate pieces that add up quickly. The tailgate with the rear glass requires careful cutting around the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Oldsmobile Vista Cruiser, first generation, factory photo
Factory color shown

1964–1967 Vista Cruiser wagon (first generation)

1964–1967wagon (5 doors)209.1 in (5,311 mm)

The first generation Oldsmobile Vista Cruiser from 1964 to 1967 is the shortest of the three. The five-door wagon body still has many panels, but the total film is about 72 ft (22 m). The shorter length reduces the area of the roof and the rear quarter panels. The tailgate with the rear glass is a detail that needs precise trimming.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Vista Cruiser

A partial wrap on the Vista Cruiser can cover the roof, the hood, or the mirror caps. Vista Cruiser chrome delete turns the bright window trim and badges black with film. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. These smaller jobs change the look or protect the paint without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Vista Cruiser: body, cut-outs and film

An Oldsmobile Vista Cruiser vinyl wrap covers a large five-door wagon with a long roof and tall sides. The third and second generations measure 217.6 in (5,527 mm), while the first generation is 209.1 in (5,311 mm). The extra height and length add more square footage compared to a sedan. A full wrap requires careful planning around the windows and the rear tailgate.

Vista Cruiser wrap ideas often start with the long roof and the window pillars. A contrasting color on the roof can change the look without wrapping the whole car. The tailgate has the rear glass in it, so the film ends at the edge of the glass. For a clean install, the door handles and badges come off before the film goes on.

How much vinyl to wrap a Vista Cruiser depends on the generation. The third and second generations use about 76 ft (23 m) of 60-inch cast film, while the first generation uses about 72 ft (22 m). The difference comes from the 8.5-inch shorter body of the first generation. Chrome or patterned film adds about 9 ft (3 m) for all generations.

Questions about wrapping an Oldsmobile Vista Cruiser

How much vinyl does it take to wrap an Oldsmobile Vista Cruiser?

It takes about 76 ft (23 m) of 60-inch (1.52 m) cast film to wrap an Oldsmobile Vista Cruiser of the newest body. That figure covers the third and second generations. The first generation needs about 72 ft (22 m) because it is shorter. Chrome or patterned film adds about 9 ft (3 m).

Can I wrap only the hood or the roof of a Vista Cruiser?

Yes, you can wrap only the hood or the roof of a Vista Cruiser. A partial wrap covers the roof, hood, or mirror caps as separate jobs. Chrome delete on the window trim and badges is another small option. Paint protection film on the front end is a clear film that protects the paint.

Is a Vista Cruiser hard to wrap?

A Vista Cruiser is not the hardest car to wrap, but its size and tailgate add work. The long roof and tall sides mean more film and more time to lay it smoothly. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The total length of 217.6 in (5,527 mm) requires careful handling of large panels.

How many generations of the Vista Cruiser does this page cover?

This page covers three generations of the Oldsmobile Vista Cruiser. They are the first generation from 1964 to 1967, the second generation from 1968 to 1972, and the third generation from 1973 to 1977. Each generation is a five-door wagon, but the first generation is shorter.