Wraps by car

Oldsmobile Aurora wrap

The Oldsmobile Aurora wrap page covers both generations of the full-size sedan and the vinyl wrap a complete color change takes. The first generation ran from 1994 to 1999, and the second from 1999 to 2003. A full wrap of the newer body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 70 ft (21.5 m).

2generations17 mof film for a full wrap

Oldsmobile Aurora, second generation, factory photo
Oldsmobile Aurora, second generation. Factory color shown.

Oldsmobile Aurora wrap colors and ideas

  • Aurora black wrap
  • Aurora white wrap
  • Aurora gray wrap
  • Aurora silver wrap
  • Aurora red wrap
  • Aurora blue wrap
  • Aurora green wrap
  • Aurora yellow wrap
  • Aurora orange wrap
  • Aurora purple wrap
  • Aurora pink wrap
  • Aurora teal wrap
  • Aurora brown wrap
  • Aurora gold wrap
  • Aurora chrome wrap
  • Aurora color shift wrap
  • Aurora carbon fiber wrap
  • Aurora camo and patterned wrap

How much vinyl to wrap an Oldsmobile Aurora

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2003sedan (4 doors)199.2 in (5,060 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1994–1999sedan (4 doors)205.4 in (5,218 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Aurora wrap cost factors

The Aurora wrap cost depends on the film type, the size of the car and the amount of disassembly. A full color change on either generation uses about 56 to 57 ft (17 to 17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film brings the material need to about 70 ft (21.5 m) because extra film is needed to match the pattern. Removing bumpers, door handles and trim adds labor time, and old paint may need more surface preparation before the film can be applied.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Aurora wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Aurora, second generation, factory photo
Factory color shown

1999–2003 Aurora sedan (second generation)

1999–2003sedan (4 doors)199.2 in (5,060 mm)

The second generation Oldsmobile Aurora from 1999 to 2003 is a full-size sedan, 199.2 in (5,060 mm) long. Paint on a car of these years may be original or repainted, so a test spot on each panel comes before a full wrap. If the clear coat is peeling or the paint is chalky, the film will not bond evenly and the finish will show the damage. A full wrap of this generation uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) in chrome or patterned film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Oldsmobile Aurora, first generation, factory photo
Factory color shown

1994–1999 Aurora sedan (first generation)

1994–1999sedan (4 doors)205.4 in (5,218 mm)

The first generation Oldsmobile Aurora from 1994 to 1999 is a full-size sedan, 205.4 in (5,218 mm) long. The extra length over the second generation means slightly more film, about 57 ft (17.5 m) of 60-inch (1.52 m) cast material. The body style is the same four-door sedan, so the number of panels does not change. The larger rear quarter panels and longer roof are the main areas that add the extra material.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Aurora

A partial wrap on an Oldsmobile Aurora can cover the roof, hood or mirror caps as a color accent. An Aurora chrome delete covers the window trim and badges with black film to change the brightwork without a full wrap. Paint protection film (PPF) is clear film on the front end to guard the bumper, hood and fenders from stone chips. These jobs use far less film than a full color change and can be done on one panel or a set of panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Aurora: body, cut-outs and film

The Oldsmobile Aurora vinyl wrap is shaped by a four-door sedan body that is 199.2 in (5,060 mm) long on the second generation and 205.4 in (5,218 mm) on the first. Both generations are full-size cars, so the roof, hood, doors and rear quarters create large, mostly flat panels. The wrap installer can lay film across each door in one piece without stretching around aggressive curves. The rocker panels and lower bumper sections are the only areas that need extra relief cuts.

Aurora wrap ideas start with the details that need cut-outs or removal. Door handles, mirrors, antenna bases and the trim around the side glass are the main cut-out points. The bumpers have fog light openings and tow hook covers that are cleaner to cut after the film is laid. Badging and the Aurora script on the trunk lid come off before wrapping and go back on with new adhesive. On a full color change, the door jambs and the inside of the trunk lid can stay the original color unless you want them wrapped.

How much vinyl to wrap an Aurora depends on which generation you own. The first generation is 205.4 in (5,218 mm) long and needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The second generation is 199.2 in (5,060 mm) long and needs about 56 ft (17 m). The difference in length is small, so a roll of film left from one generation will almost cover the other. Chrome or patterned film adds waste because the pattern must line up across panels, which brings both generations to about 70 ft (21.5 m).

Questions about wrapping an Oldsmobile Aurora

How much vinyl does it take to wrap an Oldsmobile Aurora?

A full Oldsmobile Aurora wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for the second generation. The first generation is slightly longer and takes about 57 ft (17.5 m). If you use chrome or patterned film, the estimate is about 70 ft (21.5 m) because the pattern has to line up on every panel.

Can I wrap only the hood or the roof of an Aurora?

Yes, an Aurora can be wrapped only on the hood or the roof. A partial wrap can also cover the mirror caps or a set of panels. A chrome delete on the window trim and badges is another small job. These jobs are much smaller than a full color change and use less film.

Is an Aurora hard to wrap?

An Aurora is not the hardest car to wrap, but its size adds work. The sedan body is over 199 in (5,050 mm) long, so the roof and quarter panels are large pieces. The door jambs and the trunk lip need careful cutting, and the bumpers have fog light openings and tow hook covers that are easier to cut after the film is laid.

How many generations of the Aurora does this page cover?

This page covers two generations of the Oldsmobile Aurora. The first generation ran from 1994 to 1999, and the second from 1999 to 2003. Both are covered with their own film estimates and body sizes.