Wraps by car

Oldsmobile Series 60 wrap

This page covers the Oldsmobile Series 60 vinyl wrap, from the 1939–1940 first generation coupe to the 1941–1948 second generation wagon. The catalog lists two generations of the Series 60 and their body styles. A full wrap of the newest body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

2generations21.5 mof film for a full wrap

Oldsmobile Series 60, second generation, factory photo
Oldsmobile Series 60, second generation. Factory color shown.

Oldsmobile Series 60 wrap colors and ideas

  • Series 60 black wrap
  • Series 60 white wrap
  • Series 60 gray wrap
  • Series 60 silver wrap
  • Series 60 red wrap
  • Series 60 blue wrap
  • Series 60 green wrap
  • Series 60 yellow wrap
  • Series 60 orange wrap
  • Series 60 purple wrap
  • Series 60 pink wrap
  • Series 60 teal wrap
  • Series 60 brown wrap
  • Series 60 gold wrap
  • Series 60 chrome wrap
  • Series 60 color shift wrap
  • Series 60 carbon fiber wrap
  • Series 60 camo and patterned wrap

How much vinyl to wrap an Oldsmobile Series 60

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1941–1948wagon (5 doors)204.0 in (5,182 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1939–1940coupe (2 doors)189.0 in (4,801 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Series 60 wrap cost factors

Series 60 wrap cost depends on the car's size, body style, and the condition of the paint. The larger second generation wagon has more panels than the first generation coupe, so labor and film amount are greater. Paint condition on a car of these years can vary, and any repairs before wrapping affect the cost. The choice of film, such as a chrome or patterned finish, also adds to the material amount.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Series 60 wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Series 60, second generation, factory photo
Factory color shown

1941–1948 Series 60 wagon (second generation)

1941–1948wagon (5 doors)204.0 in (5,182 mm)

The second generation Oldsmobile Series 60 from 1941–1948 is a five-door wagon with a 204.0 in (5,182 mm) body. Paint age matters on a car of these years, as panels may be original or repainted. A test spot on the paint comes before a full wrap to check adhesion. This generation needs about 70 ft (21.5 m) of standard cast film for a complete color change wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Oldsmobile Series 60, first generation, factory photo
Factory color shown

1939–1940 Series 60 coupe (first generation)

1939–1940coupe (2 doors)189.0 in (4,801 mm)

The first generation Oldsmobile Series 60 from 1939–1940 is a two-door coupe with a 189.0 in (4,801 mm) body. The smaller size and two-door style mean less film and fewer panels than the later wagon. Each long side door is wrapped as one large piece of film. A full wrap of this coupe uses about 61 ft (18.5 m) of standard cast film.

Two long side doors: each door is one large piece of film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Series 60

The Series 60 chrome delete involves covering window trim and badges with black film. A partial wrap on this car can cover the roof, hood, and mirror caps, leaving the rest of the body painted. For paint protection film (PPF), a clear film is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Series 60: body, cut-outs and film

An Oldsmobile Series 60 vinyl wrap depends on the body style and size of the car. The first generation is a two-door coupe at 189.0 in (4,801 mm) long, while the second generation is a five-door wagon at 204.0 in (5,182 mm). The wagon has more panels and a larger surface area, so it needs more film than the coupe.

Series 60 wrap ideas start with the parts that need cut-outs or come off the car. The second generation wagon has a tailgate with rear glass in it, so the film ends at the edge of the glass. The first generation coupe has two long side doors, and each door is one large piece of film.

When figuring how much vinyl to wrap a Series 60, the generation changes the film amount. The second generation wagon from 1941–1948 needs about 70 ft (21.5 m) of standard cast film, while the first generation coupe from 1939–1940 needs about 61 ft (18.5 m). For chrome or patterned film, the wagon uses about 80 ft (24.5 m) and the coupe about 67 ft (20.5 m).

Questions about wrapping an Oldsmobile Series 60

How much vinyl does it take to wrap an Oldsmobile Series 60?

It takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film to wrap the newest Oldsmobile Series 60 body, the 1941–1948 wagon. This estimate is for a full color change wrap without extra chrome or patterned film.

Can I wrap only the hood or the roof of a Series 60?

Yes, you can wrap only the hood or the roof of a Series 60. A partial wrap on this car includes the roof, hood, and mirror caps, or any combination of those panels.

Is a Series 60 hard to wrap?

A Series 60 is not hard to wrap, but some details add work. The second generation wagon has a tailgate with rear glass, so the film must end at the glass edge. The first generation coupe has two long side doors, each needing one large piece of film. The car's overall length, up to 204.0 in (5,182 mm), means careful handling of long film sections.

How many generations of the Series 60 does this page cover?

This page covers two generations of the Series 60. They are the first generation from 1939–1940 and the second generation from 1941–1948.