Wraps by car

Oldsmobile F-85 wrap

The Oldsmobile F-85 wrap page covers all four generations of this full-size car. A vinyl wrap on the newest body takes about 69 ft (21 m) for the coupe or 77 ft (23.5 m) for the sedan. Those figures use 60-inch (1.52 m) cast film and change if you pick chrome or patterned film.

4generations

Oldsmobile F-85, fourth generation, factory photo
Oldsmobile F-85, fourth generation. Factory color shown.

Oldsmobile F-85 wrap colors and ideas

  • Oldsmobile F-85 black wrap
  • Oldsmobile F-85 white wrap
  • Oldsmobile F-85 gray wrap
  • Oldsmobile F-85 silver wrap
  • Oldsmobile F-85 red wrap
  • Oldsmobile F-85 blue wrap
  • Oldsmobile F-85 green wrap
  • Oldsmobile F-85 yellow wrap
  • Oldsmobile F-85 orange wrap
  • Oldsmobile F-85 purple wrap
  • Oldsmobile F-85 pink wrap
  • Oldsmobile F-85 teal wrap
  • Oldsmobile F-85 brown wrap
  • Oldsmobile F-85 gold wrap
  • Oldsmobile F-85 chrome wrap
  • Oldsmobile F-85 color shift wrap
  • Oldsmobile F-85 carbon fiber wrap
  • Oldsmobile F-85 camo and patterned wrap

How much vinyl to wrap an Oldsmobile F-85

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1968coupe, sedan (3 or 4 doors)——
1968–1972coupe, sedan (3 or 4 doors)205.9 in (5,230 mm)about 69 ft (21 m) for the coupe to 77 ft (23.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 95 ft (29 m)
1964–1965convertible, coupe, sedan, wagon (2 or 4 doors)203.0 in (5,156 mm)about 54 ft (16.5 m) for the coupe to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1961–1963convertible, coupe, sedan, wagon (2 or 4 or 5 doors)188.2 in (4,780 mm) to 192.2 in (4,882 mm)about 51 ft (15.5 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Oldsmobile F-85 wrap cost factors

Oldsmobile F-85 wrap cost depends on body style, film choice and how much of the car is covered. A full wrap on a third-generation sedan uses up to 77 ft (23.5 m) of 60-inch (1.52 m) cast film, while a first-generation convertible starts at 51 ft (15.5 m). Chrome or patterned film adds material by a third or more. A partial wrap, like a hood or a chrome delete, needs less film and less labor.

  • Body: coupe, sedan (3 or 4 doors).

Oldsmobile F-85 wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile F-85, fourth generation, factory photo
Factory color shown

1968–1968 Oldsmobile F-85 coupe, sedan (fourth generation)

1968–1968coupe, sedan (3 or 4 doors)

The fourth-generation Oldsmobile F-85 (1968) comes as a coupe or a sedan with three or four doors. The body style decides the panel plan and the film amount, because a four-door sedan has more door jambs and a longer roof. A coupe has longer doors, which are easier to cover with one piece of film. A sedan needs more trimming around the rear door handles and window frames.

Oldsmobile F-85, third generation, factory photo
Factory color shown

1968–1972 Oldsmobile F-85 coupe, sedan (third generation)

1968–1972coupe, sedan (3 or 4 doors)205.9 in (5,230 mm)

The third-generation Oldsmobile F-85 ran from 1968 to 1972 as a coupe or sedan. Its years overlap with the fourth-generation body in 1968 only, so the owner of a 1968 car checks which body it is before ordering film. The third-generation body is 205.9 in (5,230 mm) long, and the coupe takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. The sedan needs about 77 ft (23.5 m) of the same film.

Film: about 69 ft (21 m) for the coupe to 77 ft (23.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 95 ft (29 m).

Oldsmobile F-85, second generation, factory photo
Factory color shown

1964–1965 Oldsmobile F-85 convertible, coupe, sedan, wagon (second generation)

1964–1965convertible, coupe, sedan, wagon (2 or 4 doors)203.0 in (5,156 mm)

The second-generation Oldsmobile F-85 (1964–1965) offered a convertible, coupe, sedan and wagon. On a convertible, the fabric top is not wrapped and the film ends where the top begins, while a folding hard top is wrapped as panels of its own. The wagon adds a tailgate with the rear glass in it, so the film ends at the edge of the glass. Those open-body details change the panel count and the amount of edge finishing.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the coupe to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Oldsmobile F-85, first generation, factory photo
Factory color shown

1961–1963 Oldsmobile F-85 convertible, coupe, sedan, wagon (first generation)

1961–1963convertible, coupe, sedan, wagon (2 or 4 or 5 doors)188.2 in (4,780 mm) to 192.2 in (4,882 mm)

The first-generation Oldsmobile F-85 (1961–1963) is a full-size car with paint that may be original or repainted after all these years. Before a full wrap, a test spot on the paint shows whether the film will bond well. This generation was restyled in 1962 and 1963, and the body length runs from 188.2 in (4,780 mm) to 192.2 in (4,882 mm). The wagon needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, the most in this generation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Oldsmobile F-85

A partial wrap on an Oldsmobile F-85 can be a roof, hood or mirror caps, which uses a small roll of cast film. An Oldsmobile F-85 chrome delete covers window trim and badges with black film, a job that calls for long, narrow pieces and careful cutting. Paint protection film (PPF) is a clear film on the front end, and it guards the hood, fenders and bumper from road debris. These smaller jobs are a way to change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile F-85: body, cut-outs and film

Body styles on the Oldsmobile F-85 range from two-door coupes to five-door wagons, and each style changes the vinyl wrap layout. More doors and a longer roof add panels, while a wagon tailgate adds area and work. The first generation measures 188.2 in (4,780 mm) to 192.2 in (4,882 mm), and later cars stretch to 205.9 in (5,230 mm). A full wrap on a wagon needs more film than a coupe because of the extra body length and the tailgate.

An Oldsmobile F-85 wrap has a few parts that call for cut-outs or removal before film goes on. Convertible bodies have a fabric top that is not wrapped, so the film ends where the top begins, and a folding hard top is wrapped as panels of its own. Wagons with a tailgate that includes the rear glass get film only up to the edge of the glass. Door handles, badges and trim are taken off for a clean edge and put back after the film is laid.

How much vinyl to wrap an Oldsmobile F-85 changes from one generation to the next, so an owner should not order film by model year alone. The third generation (1968–1972) is the longest and needs about 69 ft (21 m) for a coupe, while the first generation (1961–1963) uses about 51 ft (15.5 m) for a convertible. The fourth generation (1968) shares its years with the third, so a car from 1968 must be checked against both body styles. The second generation (1964–1965) falls between them, at about 54 ft (16.5 m) for a coupe.

Questions about wrapping an Oldsmobile F-85

How much vinyl does it take to wrap an Oldsmobile F-85?

The newest Oldsmobile F-85 body takes about 69 ft (21 m) for the coupe and 77 ft (23.5 m) for the sedan, using 60-inch (1.52 m) cast film. That includes the roof, pillars, doors, fenders, hood, trunk and bumpers, with 10 to 15 percent extra for mistakes and curves. Chrome or patterned film needs more, up to about 95 ft (29 m) for a full wrap.

Which Oldsmobile F-85 body takes more film?

The sedan takes more film than the coupe on the third-generation Oldsmobile F-85. The sedan estimate is about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, and the coupe is about 69 ft (21 m). A wagon in the first or second generation takes the most film of those bodies: about 61 ft (18.5 m) for the first generation and about 62 ft (19 m) for the second.

Can I wrap only the hood or the roof of an Oldsmobile F-85?

Yes, only the hood or the roof of an Oldsmobile F-85 can be wrapped as a partial job. A roof wrap covers the panel between the windshield and rear glass, and a hood wrap covers the top surface and the edges. Mirror caps are another single-panel job that uses scraps of cast film. These partial wraps use the same 60-inch (1.52 m) film as a full wrap, cut to the size of the panel.

Is an Oldsmobile F-85 hard to wrap?

An Oldsmobile F-85 is not the easiest car to wrap because of its size and a few body details. At up to 205.9 in (5,230 mm) long, the third generation has long, flat panels that need two people to lay film without wrinkles. Convertible bodies have a fabric top that is not wrapped, so the installer must cut and finish the film along the top edge. A tailgate with the rear glass in it, found on wagons, means the film must end at the edge of the glass with no wrap-around.