Wraps by car

Oldsmobile Starfire wrap

This page covers Oldsmobile Starfire wrap information for two generations of the car. The first generation ran from 1961 to 1966, and the second from 1975 to 1980. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations15 mof film for a full wrap

Oldsmobile Starfire, second generation, factory photo
Oldsmobile Starfire, second generation. Factory color shown.

Oldsmobile Starfire wrap colors and ideas

  • Starfire black wrap
  • Starfire white wrap
  • Starfire gray wrap
  • Starfire silver wrap
  • Starfire red wrap
  • Starfire blue wrap
  • Starfire green wrap
  • Starfire yellow wrap
  • Starfire orange wrap
  • Starfire purple wrap
  • Starfire pink wrap
  • Starfire teal wrap
  • Starfire brown wrap
  • Starfire gold wrap
  • Starfire chrome wrap
  • Starfire color shift wrap
  • Starfire carbon fiber wrap
  • Starfire camo and patterned wrap

How much vinyl to wrap an Oldsmobile Starfire

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1980hatchback (3 doors)179.3 in (4,554 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1961–1966convertible (2 doors)217.0 in (5,512 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Starfire wrap cost factors

Starfire wrap cost is driven by the amount of film, the body details, and how much disassembly a wrapper does. The second generation takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the first takes about 59 ft (18 m). A hatchback with a glass-in tailgate and long doors adds trimming time, and a convertible needs care around the top. Paint condition also matters: old or repainted panels may need a test spot before a full wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Starfire wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Starfire, second generation, factory photo
Factory color shown

1975–1980 Starfire hatchback (second generation)

1975–1980hatchback (3 doors)179.3 in (4,554 mm)

The 1975–1980 Oldsmobile Starfire is a hatchback with three doors and a length of 179.3 in (4,554 mm). On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The rear glass is set into the tailgate, and the film ends at the edge of that glass. Each of the two long side doors is wrapped as one large piece of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Oldsmobile Starfire, first generation, factory photo
Factory color shown

1961–1966 Starfire convertible (first generation)

1961–1966convertible (2 doors)217.0 in (5,512 mm)

The 1961–1966 Oldsmobile Starfire is a convertible with two doors and a length of 217.0 in (5,512 mm). The open top decides what happens in a wrap: a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own. The wrap itself stops cleanly at the line where the top meets the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Starfire

Smaller jobs on a Starfire include a partial wrap of the roof, hood, and mirror caps. A Starfire chrome delete covers window trim and badges with black film, which is also called a bright trim wrap. Paint protection film (PPF) can be applied as clear film on the front end. These options wrap less than a full color change wrap and use less material.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Starfire: body, cut-outs and film

The Oldsmobile Starfire vinyl wrap layout depends on the body style and size of each generation. The second generation is a 179.3 in (4,554 mm) long hatchback with three doors. The first generation is a 217.0 in (5,512 mm) long convertible with two doors. These differences change how film is cut and how much material a wrapper keeps ready.

Starfire wrap ideas start with the parts that need cut-outs or come off during installation. The second generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Its two long side doors are each one large piece of film. For the first generation, a fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Starfire changes between the two generations. The second generation needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change wrap. The first generation is larger and needs about 59 ft (18 m) of the same film. Anyone counting film for this car should use the figure for the exact body they are wrapping.

Questions about wrapping an Oldsmobile Starfire

How much vinyl does it take to wrap an Oldsmobile Starfire?

A full wrap of the newest Oldsmobile Starfire body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That is for the 1975–1980 generation, the one this film estimate covers. The first generation is larger and would need more material, about 59 ft (18 m).

Can I wrap only the hood or the roof of a Starfire?

Yes, you can wrap only the hood or the roof of a Starfire. A partial wrap on this car can cover the roof, hood, and mirror caps alone. A chrome delete on window trim and badges is another option. Paint protection film (PPF) on the front end is also a partial job that uses clear film.

Is a Starfire hard to wrap?

A Starfire can take extra work to wrap because of its size and body details. The 1975–1980 hatchback is 179.3 in (4,554 mm) long, and its glass-in tailgate means the film ends at the edge of the glass. Each of its two long side doors is one large piece of film that needs careful handling. The 1961–1966 convertible requires care where the film meets the top.

How many generations of the Starfire does this page cover?

This page covers two generations of the Oldsmobile Starfire. They are the first generation from 1961 to 1966 and the second generation from 1975 to 1980.