Wraps by car

Oldsmobile Firenza wrap

The Oldsmobile Firenza wrap page covers this compact car from 1982–1988 in hatchback, sedan, and wagon forms. A full vinyl wrap of the newest body takes about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 69 ft (21 m).

1generations15 mof film for a full wrap

Oldsmobile Firenza, first generation, factory photo
Oldsmobile Firenza, first generation. Factory color shown.

Oldsmobile Firenza wrap colors and ideas

  • Firenza black wrap
  • Firenza white wrap
  • Firenza gray wrap
  • Firenza silver wrap
  • Firenza red wrap
  • Firenza blue wrap
  • Firenza green wrap
  • Firenza yellow wrap
  • Firenza orange wrap
  • Firenza purple wrap
  • Firenza pink wrap
  • Firenza teal wrap
  • Firenza brown wrap
  • Firenza gold wrap
  • Firenza chrome wrap
  • Firenza color shift wrap
  • Firenza carbon fiber wrap
  • Firenza camo and patterned wrap

How much vinyl to wrap an Oldsmobile Firenza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1988hatchback, sedan, wagon (3 or 4 or 5 doors)169.9 in (4,315 mm) to 179.0 in (4,547 mm)about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Firenza wrap cost factors

Firenza wrap cost depends on the body style, film type, and the amount of disassembly the job needs. A wagon uses about 54 ft (16.5 m) of film, so it costs more in material than a sedan at about 49 ft (15 m). Chrome or patterned film adds further material cost because you may need up to about 69 ft (21 m).

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: hatchback, sedan, wagon (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Firenza wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Firenza, first generation, factory photo
Factory color shown

1982–1988 Firenza hatchback, sedan, wagon (first generation)

1982–1988hatchback, sedan, wagon (3 or 4 or 5 doors)169.9 in (4,315 mm) to 179.0 in (4,547 mm)

The first generation Oldsmobile Firenza from 1982–1988 came as a hatchback, sedan, or wagon, and the style decides the panel plan and film amount. The sedan is the smallest, and the wagon is the longest at 179.0 in (4,547 mm). Installers measure each panel and add waste for the tailgate glass edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Firenza

A partial wrap on an Oldsmobile Firenza can cover the roof, hood, or mirror caps without doing the whole car. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Firenza: body, cut-outs and film

An Oldsmobile Firenza vinyl wrap follows the body style you have, with lengths from 169.9 in (4,315 mm) to 179.0 in (4,547 mm). The sedan needs the least film, while the wagon uses the most because of its larger rear panels. Three-door hatchback models fall between them and have a shorter roof to cover.

Firenza wrap ideas must account for the tailgate with the rear glass in it, where the film ends at the edge of the glass. The glass itself stays free of vinyl, so the installer cuts around it precisely. Door handles, mirrors, and badges also need careful trimming or removal before film goes on.

To know how much vinyl to wrap a Firenza, compare the three body styles from 1982–1988. The hatchback and sedan sit close in size, while the wagon adds enough surface to push the estimate to 54 ft (16.5 m). If you choose chrome or patterned film, plan for up to about 69 ft (21 m) because of extra matching waste.

Questions about wrapping an Oldsmobile Firenza

How much vinyl does it take to wrap an Oldsmobile Firenza?

A full wrap of an Oldsmobile Firenza takes about 49 ft (15 m) for the sedan and 54 ft (16.5 m) for the wagon using 60-inch (1.52 m) cast film. The hatchback falls between those figures. Chrome or patterned film can require up to about 69 ft (21 m) due to waste.

Which Firenza body takes more film?

The wagon body takes more film than the sedan or hatchback, with about 54 ft (16.5 m) needed. The sedan uses about 49 ft (15 m), and the hatchback sits between the two. The wagon's extra length and large tailgate explain the difference.

Can I wrap only the hood or the roof of a Firenza?

Yes, you can wrap only the hood or the roof of a Firenza as a partial wrap. Mirror caps are another smaller job that changes the look without a full wrap. A chrome delete covers window trim and badges, and paint protection film protects the front end.

Is a Firenza hard to wrap?

A Firenza is not especially hard to wrap, but the tailgate with the rear glass in it adds work. The film must end at the edge of the glass, so the installer trims that line carefully. The car's length of up to 179.0 in (4,547 mm) means more film and more seams than a smaller car.