Wraps by car

Oldsmobile Delta 88 wrap

This page covers the Oldsmobile Delta 88 wrap for two generations of the full-size sedan. The catalog lists the eighth generation from 1977 to 1985 and the ninth generation from 1986 to 1991. A full vinyl wrap of the newest body takes about 55 to 60 feet of film.

2generations

Oldsmobile Delta 88, ninth generation, factory photo
Oldsmobile Delta 88, ninth generation. Factory color shown.

Oldsmobile Delta 88 wrap colors and ideas

  • Delta 88 black wrap
  • Delta 88 white wrap
  • Delta 88 gray wrap
  • Delta 88 silver wrap
  • Delta 88 red wrap
  • Delta 88 blue wrap
  • Delta 88 green wrap
  • Delta 88 yellow wrap
  • Delta 88 orange wrap
  • Delta 88 purple wrap
  • Delta 88 pink wrap
  • Delta 88 teal wrap
  • Delta 88 brown wrap
  • Delta 88 gold wrap
  • Delta 88 chrome wrap
  • Delta 88 color shift wrap
  • Delta 88 carbon fiber wrap
  • Delta 88 camo and patterned wrap

How much vinyl to wrap an Oldsmobile Delta 88

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1991sedan (4 doors)——
1977–1985sedan (4 doors)——

Delta 88 wrap cost factors

Delta 88 wrap cost depends mainly on the size of the two full-size sedan generations and the film finish you pick. The ninth-generation car from 1986 to 1991 is longer than the 1977 to 1985 model, so it takes a little more material and labor. The condition of the paint also matters because older panels may need more prep before the film goes on. A partial job like a hood or roof costs less than a full wrap because it uses less film and fewer hours.

  • Body: sedan (4 doors).

Delta 88 wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Delta 88, ninth generation, factory photo
Factory color shown

1986–1991 Delta 88 sedan (ninth generation)

1986–1991sedan (4 doors)

On a 1986 to 1991 Delta 88, the paint age is the first thing to check before a wrap. Some panels may have been repainted over the years, and old paint can lift when the film is removed. A test spot on each panel shows whether the surface will hold the vinyl. Wrapping over failing paint is not recommended, so a repaint of a damaged panel may be needed first.

Oldsmobile Delta 88, eighth generation, factory photo
Factory color shown

1977–1985 Delta 88 sedan (eighth generation)

1977–1985sedan (4 doors)

The 1977 to 1985 Delta 88 is a long four-door sedan, which means a full wrap takes more film than a compact car. Because it has four doors and a large roof, the installer cuts pieces for each panel separately. The body has fewer complex curves than a modern car, so the film lays down with less stretching. A full wrap of this generation takes about 55 to 60 feet of vinyl.

Roof, hood, chrome delete and PPF on a Delta 88

A partial wrap on a Delta 88 can cover the roof, hood or mirror caps instead of the whole car. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. These smaller jobs use less material and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Delta 88: body, cut-outs and film

An Oldsmobile Delta 88 vinyl wrap on this four-door sedan means working with a long roof, large doors and big quarter panels. The ninth-generation car from 1986 to 1991 has a slightly longer body than the 1977 to 1985 model. Both generations share the same basic shape, so film pieces are sized for full-size sedan panels. The wrap has few complex curves compared with a modern crossover.

Delta 88 wrap ideas start with deciding how much of the bright trim to cover or leave. The door handles, mirrors, antenna and badges need cut-outs so the film lies flat. The front and rear bumpers are simple to wrap but need relief cuts at the corners. To wrap behind the grille or the door handles, those parts come off the car first.

When you count how much vinyl to wrap a Delta 88, the answer changes slightly between the two generations. The ninth-generation sedan from 1986 to 1991 is longer than the 1977 to 1985 body, so it needs a little more film. Both are four-door sedans, so the number of panels stays the same. A full wrap of either generation uses about 55 to 60 feet of material.

Questions about wrapping an Oldsmobile Delta 88

How much vinyl does it take to wrap an Oldsmobile Delta 88?

It takes about 55 to 60 feet of vinyl to wrap an Oldsmobile Delta 88. That figure is for the newest body, the ninth-generation sedan from 1986 to 1991. The eighth-generation car from 1977 to 1985 is slightly smaller and may need a little less film.

Can I wrap only the hood or the roof of a Delta 88?

Yes, you can wrap only the hood or the roof of a Delta 88. A partial wrap can also cover the mirror caps or other small areas. A chrome delete on the window trim and badges is another option. Paint protection film on the front end is a clear alternative to a color change wrap.

Is a Delta 88 hard to wrap?

A Delta 88 is not a hard car to wrap, but its size adds work. It is a full-size four-door sedan with a long roof and large panels, so you need more film and more time than on a smaller car. The door handles, mirrors and badges need cut-outs, and the front end has several contours that require relief cuts.

How many generations of the Delta 88 does this page cover?

This page covers two generations of the Delta 88. The eighth generation ran from 1977 to 1985, and the ninth generation ran from 1986 to 1991. Both are four-door full-size sedans.