Wraps by car

Oldsmobile Silhouette wrap

This page covers the Oldsmobile Silhouette wrap for both generations of the van. The first generation ran from 1989 to 1996 and the second from 1996 to 2004. A full vinyl wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 87 ft (26.5 m) for the same body.

2generations23 mof film for a full wrap

Oldsmobile Silhouette, second generation, factory photo
Oldsmobile Silhouette, second generation. Factory color shown.

Oldsmobile Silhouette wrap colors and ideas

  • Silhouette black wrap
  • Silhouette white wrap
  • Silhouette gray wrap
  • Silhouette silver wrap
  • Silhouette red wrap
  • Silhouette blue wrap
  • Silhouette green wrap
  • Silhouette yellow wrap
  • Silhouette orange wrap
  • Silhouette purple wrap
  • Silhouette pink wrap
  • Silhouette teal wrap
  • Silhouette brown wrap
  • Silhouette gold wrap
  • Silhouette chrome wrap
  • Silhouette color shift wrap
  • Silhouette carbon fiber wrap
  • Silhouette camo and patterned wrap

How much vinyl to wrap an Oldsmobile Silhouette

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2004van (5 doors)201.4 in (5,115 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1989–1996van (4 doors)233.6 in (5,933 mm)about 82 ft (25 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 98 ft (30 m)

Silhouette wrap cost factors

Silhouette wrap cost depends on the film you choose, the generation and the condition of the paint. A first generation van is longer and needs more film than a second generation van. Surfaces that are rusted or poorly repainted take more preparation before the film goes on. A color change wrap costs more than a partial wrap of just the roof or hood.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Silhouette wraps by generation

Swipe sideways. Tap a card for the full description.

Oldsmobile Silhouette, second generation, factory photo
Factory color shown

1996–2004 Silhouette van (second generation)

1996–2004van (5 doors)201.4 in (5,115 mm)

The second generation Silhouette has sliding side doors that set the main cut lines for a wrap. The door tracks stay bare, and the film is cut along them so the doors still slide freely. The installer works the film into the door edges and trims it cleanly around the tracks. The rest of the body panels are wrapped as usual.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Oldsmobile Silhouette, first generation, factory photo
Factory color shown

1989–1996 Silhouette van (first generation)

1989–1996van (4 doors)233.6 in (5,933 mm)

Paint age matters on a first generation Silhouette because the panels may be original or repainted. A test spot is done before a full wrap to check how the film adheres to the old paint. If the paint is too weak, the film can lift or pull it when removed. The wrap can still be done, but the installer may need to sand or prime certain areas first.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 82 ft (25 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 98 ft (30 m).

Roof, hood, chrome delete and PPF on a Silhouette

A partial wrap on a Silhouette covers the roof, hood or mirror caps instead of the whole van. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. Any of these jobs can be done on either generation of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Oldsmobile Silhouette: body, cut-outs and film

The Oldsmobile Silhouette vinyl wrap starts with the body style and size of the van. The second generation is a 5-door van with a length of 201.4 in (5,115 mm). The first generation is a 4-door van that measures 233.6 in (5,933 mm) long. A longer body needs more film and more time to wrap.

Silhouette wrap ideas have to plan around the sliding side doors. The door tracks stay bare, and the film is cut along them on both generations. The installer removes badges, mirrors and door handles to wrap clean edges. The film is then trimmed around the cut-outs for lights and grilles.

How much vinyl to wrap a Silhouette depends on the generation you own. The first generation needs about 82 ft (25 m) of 60-inch (1.52 m) cast film. The second generation needs about 76 ft (23 m) of the same film. If you choose chrome or patterned film, add about 11 ft (3.5 m) to either estimate.

Questions about wrapping an Oldsmobile Silhouette

How much vinyl does it take to wrap an Oldsmobile Silhouette?

A full wrap of an Oldsmobile Silhouette takes about 76 ft (23 m) of 60-inch (1.52 m) cast film for the newest body. If you use chrome or patterned film, the estimate rises to about 87 ft (26.5 m). The first generation van is longer and needs about 82 ft (25 m) of cast film, or 98 ft (30 m) of chrome or patterned film. The figures include material for the door jambs and a few extra inches for trimming.

Are the sliding doors of a Silhouette wrapped?

Yes, the sliding doors of a Silhouette are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide open and closed. The installer wraps the door panels themselves and tucks the film into the edges. This is the same on both generations of the van.

Can I wrap only the hood or the roof of a Silhouette?

Yes, you can wrap only the hood or the roof of a Silhouette instead of the entire van. A partial wrap can also include the mirror caps for a smaller accent. A chrome delete covers the window trim and badges with black film. Paint protection film is a clear option for the front end only.

Is a Silhouette hard to wrap?

A Silhouette is not difficult to wrap, but the sliding doors and the size add work. The door tracks must stay bare, so the film has to be cut carefully along them. The first generation is 233.6 in (5,933 mm) long, which means more film and more seams to manage. A van with old or repainted paint may need extra preparation before the film is applied.