Wraps by car

Chrysler 180 wrap

The Chrysler 180 wrap page covers the single generation of this full-size sedan, produced from 1970 to 1976. A full vinyl wrap of the four-door body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film work calls for roughly 62 ft (19 m) of material.

1generations15 mof film for a full wrap

Chrysler 180, first generation, factory photo
Chrysler 180, first generation. Factory color shown.

Chrysler 180 wrap colors and ideas

  • Chrysler 180 black wrap
  • Chrysler 180 white wrap
  • Chrysler 180 gray wrap
  • Chrysler 180 silver wrap
  • Chrysler 180 red wrap
  • Chrysler 180 blue wrap
  • Chrysler 180 green wrap
  • Chrysler 180 yellow wrap
  • Chrysler 180 orange wrap
  • Chrysler 180 purple wrap
  • Chrysler 180 pink wrap
  • Chrysler 180 teal wrap
  • Chrysler 180 brown wrap
  • Chrysler 180 gold wrap
  • Chrysler 180 chrome wrap
  • Chrysler 180 color shift wrap
  • Chrysler 180 carbon fiber wrap
  • Chrysler 180 camo and patterned wrap

How much vinyl to wrap a Chrysler 180

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1976sedan (4 doors)175.6 in (4,460 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Chrysler 180 wrap cost factors

Chrysler 180 wrap cost depends on film type, paint condition and how much trim the installer removes. Cast film for a full sedan needs about 49 ft (15 m), and chrome or patterned film raises that to about 62 ft (19 m). Badges, handles and window trim add labor when they are removed for a neat finish.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Chrysler 180 wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler 180, first generation, factory photo
Factory color shown

1970–1976 Chrysler 180 sedan (first generation)

1970–1976sedan (4 doors)175.6 in (4,460 mm)

The first generation Chrysler 180 was built from 1970 to 1976 as a four-door sedan measuring 175.6 in (4,460 mm). Paint age matters on a car of these years, since panels may be original or repainted. A test spot on each panel comes before a full wrap to check how the film adheres.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Chrysler 180

A partial wrap on a Chrysler 180 can cover the roof, the hood or the mirror caps. Chrysler 180 chrome delete is often requested for the window trim and badges, using black film. Paint protection film (PPF) is another option, with clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chrysler 180: body, cut-outs and film

The Chrysler 180 vinyl wrap is shaped by one sedan body style with four doors and an overall length of 175.6 in (4,460 mm). The long roof and tall side panels mean the installer works with large, continuous film sheets. Four doors add more cut lines, but there is no long roof rail or tailgate to break up the sides.

Chrysler 180 wrap ideas start with the bright trim, because this car carries chrome window surrounds, door handles and badges. Those parts are removed or masked for a clean color change wrap. The front and rear bumpers also need careful relief cuts around their contours. Door mirrors come off for better edge wrapping.

How much vinyl to wrap a Chrysler 180 does not change between generations, because the catalog lists one generation only. Owners who measure their own car should still note the 175.6 in (4,460 mm) length before ordering film. The estimate of 49 ft (15 m) suits a stock sedan with no body damage or added spoilers.

Questions about wrapping a Chrysler 180

How much vinyl does it take to wrap a Chrysler 180?

A full Chrysler 180 wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. If the design includes chrome or patterned film, plan for about 62 ft (19 m) instead. These figures cover the four-door sedan body with normal installation waste.

Can I wrap only the hood or the roof of a Chrysler 180?

Yes, you can wrap only the hood or the roof of a Chrysler 180. Those panels are offered as partial wrap jobs, along with mirror caps. A chrome delete for the window trim and badges is also available without wrapping the whole car.

Is a Chrysler 180 hard to wrap?

A Chrysler 180 is not especially hard to wrap, but its length of 175.6 in (4,460 mm) adds work. The four-door body has chrome trim and badges that should be removed or masked. Bumper contours and door handles also need extra time for a clean finish.

How many generations of the Chrysler 180 does this page cover?

This page covers one generation of the Chrysler 180. The car was made from 1970 to 1976, and all body data here refer to that first generation. No other Chrysler 180 generations appear in the catalog.