Wraps by car

Chrysler Town & Country wrap

The Chrysler Town & Country wrap page covers four generations of this minivan, from the 1990–1995 second generation to the 2007–2016 fifth generation. A full vinyl wrap of the newest body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 90 ft (27.5 m).

4generations23.5 mof film for a full wrap

Chrysler Town & Country, fifth generation, factory photo
Chrysler Town & Country, fifth generation. Factory color shown.

Chrysler Town & Country wrap colors and ideas

  • Town & Country black wrap
  • Town & Country white wrap
  • Town & Country gray wrap
  • Town & Country silver wrap
  • Town & Country red wrap
  • Town & Country blue wrap
  • Town & Country green wrap
  • Town & Country yellow wrap
  • Town & Country orange wrap
  • Town & Country purple wrap
  • Town & Country pink wrap
  • Town & Country teal wrap
  • Town & Country brown wrap
  • Town & Country gold wrap
  • Town & Country chrome wrap
  • Town & Country color shift wrap
  • Town & Country carbon fiber wrap
  • Town & Country camo and patterned wrap

How much vinyl to wrap a Chrysler Town & Country

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2016van (5 doors)202.5 in (5,144 mm) to 202.8 in (5,151 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2000–2008van (5 doors)189.1 in (4,803 mm) to 200.6 in (5,095 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
1995–2000van (4 doors)199.6 in (5,070 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1990–1995van (4 doors)192.8 in (4,897 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Town & Country wrap cost factors

The Town & Country wrap cost depends on the film amount, the number of panels, and the labor for sliding door cut-outs and roof access. The fifth generation takes about 77 ft (23.5 m) of standard film, while older generations need slightly less. The tall body of 68.9 in (1,750 mm) requires a platform for the roof, which adds to the cost. Generation-specific differences in length and door count also affect the total.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Town & Country wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Town & Country, fifth generation, factory photo
Factory color shown

2007–2016 Town & Country van (fifth generation)

2007–2016van (5 doors)202.5 in (5,144 mm) to 202.8 in (5,151 mm)

The fifth generation Town & Country, produced from 2007 to 2016, has sliding side doors where the tracks stay bare and decide where the film is cut. This generation was restyled in 2010, but the door design remains the same. The body is 202.5 in (5,144 mm) to 202.8 in (5,151 mm) long and stands 68.9 in (1,750 mm) tall.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Chrysler Town & Country, fourth generation, factory photo
Factory color shown

2000–2008 Town & Country van (fourth generation)

2000–2008van (5 doors)189.1 in (4,803 mm) to 200.6 in (5,095 mm)

The fourth generation Town & Country ran from 2000 to 2008, but its years overlap with the fifth generation from 2007 to 2008. If you own a Town & Country from 2007 or 2008, check the body style to determine which generation it is. The fourth generation uses the RS code and can be identified by its length of 189.1 in (4,803 mm) to 200.6 in (5,095 mm).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Chrysler Town & Country, third generation, factory photo
Factory color shown

1995–2000 Town & Country van (third generation)

1995–2000van (4 doors)199.6 in (5,070 mm)

The third generation Town & Country, produced from 1995 to 2000, is over two decades old, so paint condition varies. Panels may be original or repainted, and a test spot is necessary before a full wrap to check adhesion. The body is 199.6 in (5,070 mm) long and has four doors with sliding side doors, which is different from the five-door later generations.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Chrysler Town & Country, second generation, factory photo
Factory color shown

1990–1995 Town & Country van (second generation)

1990–1995van (4 doors)192.8 in (4,897 mm)

The second generation Town & Country from 1990 to 1995 is the shortest at 192.8 in (4,897 mm) and has four doors. Its smaller size means it needs less film than newer generations, about 70 ft (21.5 m) of standard film. The sliding side doors still require cut-outs along the tracks, and the wrap is done panel by panel on this body style.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a Town & Country

Partial wrap options for the Town & Country include the roof, hood, and mirror caps. A Town & Country chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear film. These jobs use less material than a full wrap and can be combined.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Town & Country: body, cut-outs and film

The Chrysler Town & Country vinyl wrap has to handle a long, tall minivan body with five doors in most generations. The fifth generation is 202.5 in (5,144 mm) to 202.8 in (5,151 mm) long, while the fourth generation ranges from 189.1 in (4,803 mm) to 200.6 in (5,095 mm). The third and second generations are shorter at 199.6 in (5,070 mm) and 192.8 in (4,897 mm). A tall body of 68.9 in (1,750 mm) means the roof is wrapped from a platform.

Town & Country wrap ideas must work around the sliding side doors, because the door tracks stay bare and the film is cut along them. The tall body also requires a platform to reach the roof when wrapping. These cut-outs and access needs are consistent across all four generations, so the design has to respect the tracks on both sides.

How much vinyl to wrap a Town & Country changes with the generation and trim. The fifth generation needs about 77 ft (23.5 m) of standard cast film, while the third generation needs about 76 ft (23 m) and the second generation about 70 ft (21.5 m). The fourth generation, which overlaps the fifth from 2007 to 2008, shares the same film estimate as the fifth for standard film. Chrome or patterned film adds about 13–14 ft (4–4.5 m) to each estimate.

Questions about wrapping a Chrysler Town & Country

How much vinyl does it take to wrap a Chrysler Town & Country?

A full wrap of a Chrysler Town & Country takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest generation, the 2007–2016 model. Chrome or patterned film will require about 90 ft (27.5 m).

Are the sliding doors of a Town & Country wrapped?

Yes, the sliding doors of a Town & Country are wrapped, but the door tracks stay bare. The film is cut along the tracks to allow the doors to slide properly. This applies to all generations with sliding doors.

Which years of the Town & Country take the same film cuts?

The fifth generation from 2007 to 2016 takes the same film cuts, with a restyle in 2010 that does not change the door design. The fourth generation from 2000 to 2008 also has the same cuts, but it overlaps with the fifth in 2007–2008. The third generation (1995–2000) and second generation (1990–1995) have different cuts due to different bodies, with the second generation being shorter.

Can I wrap only the hood or the roof of a Town & Country?

Yes, you can wrap only the hood or the roof of a Town & Country. Partial wraps can include the roof, hood, and mirror caps. A partial wrap uses less film than a full wrap, and it can be a cost-effective way to change the look.