Wraps by car

Chrysler Fifth Avenue wrap

The Chrysler Fifth Avenue wrap page covers both generations of this full-size sedan. A full wrap of the newest body, the 1990–1993 second generation, takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl wrap. This guide explains the film you need, the work involved, and the options smaller than a complete color change.

2generations17 mof film for a full wrap

Chrysler Fifth Avenue, second generation, factory photo
Chrysler Fifth Avenue, second generation. Factory color shown.

Chrysler Fifth Avenue wrap colors and ideas

  • Fifth Avenue black wrap
  • Fifth Avenue white wrap
  • Fifth Avenue gray wrap
  • Fifth Avenue silver wrap
  • Fifth Avenue red wrap
  • Fifth Avenue blue wrap
  • Fifth Avenue green wrap
  • Fifth Avenue yellow wrap
  • Fifth Avenue orange wrap
  • Fifth Avenue purple wrap
  • Fifth Avenue pink wrap
  • Fifth Avenue teal wrap
  • Fifth Avenue brown wrap
  • Fifth Avenue gold wrap
  • Fifth Avenue chrome wrap
  • Fifth Avenue color shift wrap
  • Fifth Avenue carbon fiber wrap
  • Fifth Avenue camo and patterned wrap

How much vinyl to wrap a Chrysler Fifth Avenue

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1993sedan (4 doors)198.6 in (5,044 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1982–1989sedan (4 doors)206.7 in (5,250 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Fifth Avenue wrap cost factors

Fifth Avenue wrap cost depends on how much film the car needs, the film line you pick, and the hours of labor. A full wrap of the 1990–1993 sedan starts from about 56 ft (17 m) of 60-inch (1.52 m) film, while the 1982–1989 car needs about 57 ft (17.5 m). The condition of the original paint, the number of cut-outs and the trim removal change the prep time. A partial wrap uses less material but can still need careful work on the roof, hood, or chrome.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Fifth Avenue wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Fifth Avenue, second generation, factory photo
Factory color shown

1990–1993 Fifth Avenue sedan (second generation)

1990–1993sedan (4 doors)198.6 in (5,044 mm)

The 1990–1993 Chrysler Fifth Avenue is a full-size sedan 198.6 in (5,044 mm) long. On a car of these years, the paint may be original or repainted, so an installer tests a small spot before a full wrap. The test shows whether the vinyl will adhere and whether the paint will lift when the film is removed. For this generation, a full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) of chrome or patterned film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Chrysler Fifth Avenue, first generation, factory photo
Factory color shown

1982–1989 Fifth Avenue sedan (first generation)

1982–1989sedan (4 doors)206.7 in (5,250 mm)

The 1982–1989 Chrysler Fifth Avenue is a full-size sedan 206.7 in (5,250 mm) long. Its size and four-door body style mean a full wrap needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) of chrome or patterned film. The long hood, roof, and trunk panels take up most of the material, and the doors add more panels to the same roll. An installer counts the gaps and cut-outs before ordering the film for this older body.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Fifth Avenue

A partial wrap on a Chrysler Fifth Avenue can cover the roof, the hood, or the mirror caps with color change film. A chrome delete covers the window trim and badges with black film, which works well on a car with long bright moldings. Paint protection film (PPF) in a clear film can be applied to the front end to protect the bumper, hood, and fenders. Any of these jobs uses less film than a full wrap and leaves the rest of the car untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Fifth Avenue: body, cut-outs and film

The Chrysler Fifth Avenue vinyl wrap is for a long sedan, so you measure your film before cutting. The 1990–1993 car is 198.6 in (5,044 mm) long and the 1982–1989 car reaches 206.7 in (5,250 mm). A single roof panel and long side panels make full wraps use the full width of a 60-inch (1.52 m) roll. The four-door body keeps the panel layout similar across both generations, but the dimensions change the total film count.

Fifth Avenue wrap ideas start with the parts of the car that need extra film or removal. The vinyl wrap installer cuts out door handles, mirrors, lights, and the grille, and the front and rear bumpers are wrapped separately. On this car, the long chrome side moldings and the vinyl roof on some trims are areas that need a decision before the wrap. A full wrap plan also includes the inside edges of the doors and the trunk, unless you choose a partial job.

To know how much vinyl to wrap a Fifth Avenue, you compare the two generations. The 1982–1989 first generation needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. The 1990–1993 second generation needs about 56 ft (17 m) of the same film, a small saving that comes from the shorter body. If the film has a chrome or patterned finish, the material length rises to about 69 ft (21 m) or 70 ft (21.5 m).

Questions about wrapping a Chrysler Fifth Avenue

How much vinyl does it take to wrap a Chrysler Fifth Avenue?

A full wrap of a 1990–1993 Chrysler Fifth Avenue takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl. This figure covers the painted panels of the sedan body with no chrome or patterned film. The longer 1982–1989 generation needs about 57 ft (17.5 m) of the same 60-inch (1.52 m) film.

Can I wrap only the hood or the roof of a Fifth Avenue?

Yes, you can wrap only the hood or the roof of a Fifth Avenue. A partial wrap on this car can cover a single panel like the roof, the hood, or the mirror caps. The long roof of the 1982–1989 car, for example, uses a piece about the full length of the roof panel, and the hood is a separate piece. An installer cuts each piece from a 60-inch (1.52 m) roll to fit the exact panel.

Is a Fifth Avenue hard to wrap?

The Chrysler Fifth Avenue is not the hardest car to wrap, but its size adds work. The 1982–1989 body is 206.7 in (5,250 mm) long and the 1990–1993 body is 198.6 in (5,044 mm) long, so the hood, roof, and trunk are large panels that need two people to handle the vinyl. The cut-outs for the door handles, mirrors, and lights take extra time, and the long side moldings and vinyl roof on some trims need a choice between wrapping, removing, or cutting around them.

How many generations of the Fifth Avenue does this page cover?

This page covers two generations of the Chrysler Fifth Avenue. The first generation in this catalog is the 1982–1989 full-size sedan, and the second generation is the 1990–1993 full-size sedan. Both are four-door sedans, but the earlier car is longer at 206.7 in (5,250 mm) and the later car is 198.6 in (5,044 mm) long.