Wraps by car

Chrysler Aspen wrap

The Chrysler Aspen wrap page covers the full-size SUV produced from 2006 to 2008 in one generation. A full vinyl wrap of the body uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 85 ft (26 m). This guide details the body styles, wrap requirements, and film choices for the Aspen.

1generations20.5 mof film for a full wrap

Chrysler Aspen, first generation, factory photo
Chrysler Aspen, first generation. Factory color shown.

Chrysler Aspen wrap colors and ideas

  • Aspen black wrap
  • Aspen white wrap
  • Aspen gray wrap
  • Aspen silver wrap
  • Aspen red wrap
  • Aspen blue wrap
  • Aspen green wrap
  • Aspen yellow wrap
  • Aspen orange wrap
  • Aspen purple wrap
  • Aspen pink wrap
  • Aspen teal wrap
  • Aspen brown wrap
  • Aspen gold wrap
  • Aspen chrome wrap
  • Aspen color shift wrap
  • Aspen carbon fiber wrap
  • Aspen camo and patterned wrap

How much vinyl to wrap a Chrysler Aspen

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2008SUV (5 doors)200.8 in (5,100 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Aspen wrap cost factors

Aspen wrap cost depends on three main factors: the amount of material, the labor for a tall SUV, and the type of film. This vehicle needs about 67 ft (20.5 m) of standard 60-inch (1.52 m) cast film, or about 85 ft (26 m) for chrome or patterned film. The body height of 74.3 in (1,887 mm) requires a platform for the roof, which adds time to the installation. Every installer sets their own rate, so the final figure varies with local labor costs and film brand.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.3 in (1,887 mm)): the roof is wrapped from a platform.

Aspen wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Aspen, first generation, factory photo
Factory color shown

2006–2008 Aspen SUV (first generation)

2006–2008SUV (5 doors)200.8 in (5,100 mm)

The first generation Chrysler Aspen was built from 2006 to 2008 with one body style: a five-door SUV. Its height of 74.3 in (1,887 mm) means the roof cannot be wrapped from the ground; installers use a platform, which slows the job. This generation is the only one in the catalog, so the film estimate stays the same for all model years. The tall roof also requires careful ladder work or scaffolding to avoid stretching the film unevenly.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.3 in (1,887 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on an Aspen

The Chrysler Aspen can receive a partial wrap on the roof, hood, or mirror caps if you do not want a full color change. An Aspen chrome delete covers the window trim and badges with black film for a different look without wrapping large panels. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. These smaller jobs use less material and focus on the areas that see the most wear or define the car's style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Aspen: body, cut-outs and film

A Chrysler Aspen vinyl wrap starts with a five-door SUV body that measures 200.8 in (5,100 mm) long and 74.3 in (1,887 mm) tall. The single body style means every Aspen from these years has the same panels and film amounts. The tall roof adds labor because installers need a platform to reach it safely. The large side areas and long hood use most of the film, while the tailgate wraps as one piece up to the rear glass.

Aspen wrap ideas begin with the details that create clean edges and long-lasting installation. The tailgate has the rear glass built into it, so the film ends at the edge of the glass rather than wrapping around it. Door handles, mirrors, and roof rails are removed or cut out carefully for a neat finish. The tall body (74.3 in (1,887 mm)) means the roof is wrapped from a platform, which adds time but ensures full coverage.

How much vinyl to wrap an Aspen depends on the single generation made from 2006 to 2008. Every body is the same size and shape, so the film estimate does not change between years. A full wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for standard colors. Choosing chrome or patterned film raises the amount to about 85 ft (26 m) because of pattern matching and extra waste.

Questions about wrapping a Chrysler Aspen

How much vinyl does it take to wrap a Chrysler Aspen?

A full wrap of a Chrysler Aspen takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. That figure covers the 2006–2008 SUV body with standard color film. For chrome or patterned film, the amount rises to about 85 ft (26 m) due to pattern alignment and extra waste.

Can I wrap only the hood or the roof of an Aspen?

Yes, you can wrap only the hood or the roof of an Aspen. These are standard partial wrap options offered for this vehicle. The hood is a large, flat panel that is straightforward to cover, while the roof requires working from a platform because of the SUV's height.

Is an Aspen hard to wrap?

An Aspen is not the hardest vehicle to wrap, but its size and tailgate design add work. The body is 200.8 in (5,100 mm) long and 74.3 in (1,887 mm) tall, so installers need to manage large panels and reach the roof safely. The tailgate includes the rear glass, which means the film ends at the glass edge and requires precise trimming.

How many generations of the Aspen does this page cover?

The Chrysler Aspen in this catalog has one generation, produced from 2006 to 2008. There were no earlier or later generations of this model. All film estimates on this page refer to that single generation.