Wraps by car

Chrysler Vision wrap

The Chrysler Vision wrap page covers the 1992–1997 full-size sedan in its single generation. A full vinyl wrap of this body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Owners planning a color change wrap can use these figures as a starting point.

1generations17 mof film for a full wrap

Chrysler Vision, first generation, factory photo
Chrysler Vision, first generation. Factory color shown.

Chrysler Vision wrap colors and ideas

  • Vision black wrap
  • Vision white wrap
  • Vision gray wrap
  • Vision silver wrap
  • Vision red wrap
  • Vision blue wrap
  • Vision green wrap
  • Vision yellow wrap
  • Vision orange wrap
  • Vision purple wrap
  • Vision pink wrap
  • Vision teal wrap
  • Vision brown wrap
  • Vision gold wrap
  • Vision chrome wrap
  • Vision color shift wrap
  • Vision carbon fiber wrap
  • Vision camo and patterned wrap

How much vinyl to wrap a Chrysler Vision

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1997sedan (4 doors)201.6 in (5,121 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Vision wrap cost factors

Vision wrap cost depends on the film type, the number of panels wrapped, and how much disassembly the job needs. A full color change on this sedan takes about 56 ft (17 m) of cast film, while chrome or patterned film needs about 70 ft (21.5 m). Removing trim and badges adds labor, and paint condition can require extra surface preparation. The size of the panels and the amount of bright trim also affect the total.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Vision wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Vision, first generation, factory photo
Factory color shown

1992–1997 Vision sedan (first generation)

1992–1997sedan (4 doors)201.6 in (5,121 mm)

The first generation Chrysler Vision, sold from 1992 to 1997, is a large sedan with paint that has had decades to age. Some panels may still wear the original finish, while others may have been repainted. A vinyl wrap will not hide peeling clear coat, and repainted areas can fail a simple adhesion test. Always do a test spot on each panel before committing to a full wrap.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Vision

A partial wrap on a Chrysler Vision can be the roof, hood, or mirror caps, or all three together. Chrome delete on this car means covering the window trim and badges with black film, and the bright grille can be done the same way. Paint protection film (PPF) in clear film on the front end protects the hood, fenders, and bumper from stone chips. These smaller jobs use less film and leave the original color visible on most of the body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Vision: body, cut-outs and film

A Chrysler Vision vinyl wrap has to cover a long, flat-sided sedan body that measures 201.6 in (5,121 mm). The four-door sedan shape means large door panels and a long roof, which are straightforward to wrap. The tall, upright body adds height to the rear quarters and trunk lid. Counting the full length and height before ordering film helps avoid running short.

Vision wrap ideas start with the bright trim, because the window surrounds and grille need careful masking or removal. The door handles, mirror caps, and antenna should come off for a clean install, and the badges need cut-outs or removal. The front and rear bumpers are large one-piece moldings that reward patience. Working around the door moldings and side trim adds time to the job.

For someone asking how much vinyl to wrap a Vision, the answer stays the same across the 1992–1997 run. Chrysler made only one body style for this generation, so film quantities do not change between early and late cars. The main difference is paint age, which affects how well the film adheres. A test spot on a repainted panel tells you whether the surface is sound before you wrap the whole car.

Questions about wrapping a Chrysler Vision

How much vinyl does it take to wrap a Chrysler Vision?

A full wrap of a Chrysler Vision takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. That figure is for the standard color change film on the 1992–1997 sedan body. If you choose a chrome or patterned film, the estimate rises to about 70 ft (21.5 m). The extra length accounts for pattern matching and the larger wrap area of the brightwork.

Can I wrap only the hood or the roof of a Vision?

Yes, you can wrap only the hood or the roof of a Vision, or both as a partial wrap. Mirror caps are another small job that changes the look without covering the whole car. A roof wrap in black or a contrasting color is a straightforward way to alter the appearance. These partial jobs still require clean, smooth paint and careful trimming around the edges.

Is a Vision hard to wrap?

A Vision is not especially hard to wrap, but the 201.6 in (5,121 mm) length and large panels add work. The bright window trim and body moldings require masking or removal, which takes time. The front and rear bumpers have deep contours that need stretching and extra heat. A clean install on this car comes down to patience with the long, flat panels.

How many generations of the Vision does this page cover?

This page covers one generation of the Chrysler Vision, the 1992–1997 sedan. Chrysler produced no other body style or generation under this name. All the film estimates and wrap notes on this page refer to that single generation.