Wraps by car

Chrysler Grand Voyager wrap

The Chrysler Grand Voyager wrap page covers all six generations of this minivan, from the 1991 model to the current body. A full vinyl wrap of the newest Grand Voyager uses about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. The newest body is 203.6 in (5,171 mm) long, and every generation is a tall van.

6generations23.5 mof film for a full wrap

Chrysler Grand Voyager, sixth generation, factory photo
Chrysler Grand Voyager, sixth generation. Factory color shown.

Chrysler Grand Voyager wrap colors and ideas

  • Grand Voyager black wrap
  • Grand Voyager white wrap
  • Grand Voyager gray wrap
  • Grand Voyager silver wrap
  • Grand Voyager red wrap
  • Grand Voyager blue wrap
  • Grand Voyager green wrap
  • Grand Voyager yellow wrap
  • Grand Voyager orange wrap
  • Grand Voyager purple wrap
  • Grand Voyager pink wrap
  • Grand Voyager teal wrap
  • Grand Voyager brown wrap
  • Grand Voyager gold wrap
  • Grand Voyager chrome wrap
  • Grand Voyager color shift wrap
  • Grand Voyager carbon fiber wrap
  • Grand Voyager camo and patterned wrap

How much vinyl to wrap a Chrysler Grand Voyager

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowvan (4 doors)203.6 in (5,171 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)
2008–2017van (5 doors)202.5 in (5,143 mm) to 203.7 in (5,175 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)
2000–2007van (5 doors)189.2 in (4,805 mm) to 189.3 in (4,808 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1995–2000van (5 doors)186.2 in (4,730 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1991–1995van (4 doors)178.1 in (4,525 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1988–1990van (4 doors)176.0 in (4,470 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Grand Voyager wrap cost factors

Grand Voyager wrap cost depends on the body size, the film type, and the labor for specific parts. The newest model is 203.6 in (5,171 mm) long and needs about 77 ft (23.5 m) of film, while older generations are shorter and use less material. A wrap on a tall van like this takes more time for the roof, which is reached from a platform. Extra cut-outs for sensors, cameras, or fog lamps on some trims also add to the labor.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (69.9 in (1,775 mm)): the roof is wrapped from a platform.

Grand Voyager wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Grand Voyager, sixth generation, factory photo
Factory color shown

2020–now Grand Voyager van (sixth generation)

2020–nowvan (4 doors)203.6 in (5,171 mm)

The sixth generation Chrysler Grand Voyager has sliding side doors that affect the wrap installation. The door tracks stay bare, so the film is cut along them to allow smooth operation. This van is 203.6 in (5,171 mm) long, and the film panels must be trimmed precisely around the tracks. Because the body is tall at 69.9 in (1,775 mm), the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.9 in (1,775 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Chrysler Grand Voyager, fifth generation, factory photo
Factory color shown

2008–2017 Grand Voyager van (fifth generation)

2008–2017van (5 doors)202.5 in (5,143 mm) to 203.7 in (5,175 mm)

The fifth generation Chrysler Grand Voyager was restyled in 2011, changing the bumpers and lights. Film cut for a pre-2011 version does not fit the restyled body without adjustments. This generation is a five-door van with a length from 202.5 in (5,143 mm) to 203.7 in (5,175 mm). Installers need to check the production year before cutting the wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Chrysler Grand Voyager, fourth generation, factory photo
Factory color shown

2000–2007 Grand Voyager van (fourth generation)

2000–2007van (5 doors)189.2 in (4,805 mm) to 189.3 in (4,808 mm)

The fourth generation Chrysler Grand Voyager is a tall van, with a body height of 71.0 in (1,803 mm). Wrapping the roof requires a platform, which adds time to the installation. This generation is a five-door van with a length of 189.2 in (4,805 mm) to 189.3 in (4,808 mm). Because of the height, careful handling of long film panels is essential.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.0 in (1,803 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Chrysler Grand Voyager, third generation, factory photo
Factory color shown

1995–2000 Grand Voyager van (third generation)

1995–2000van (5 doors)186.2 in (4,730 mm)

The third generation Chrysler Grand Voyager was built from 1995 to 2000, so paint age is a key factor in a wrap. Panels on a car of these years may be original or repainted, and a test spot should be done before a full wrap. This generation is a five-door van with a length of 186.2 in (4,730 mm). The height of 70.9 in (1,800 mm) means the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Chrysler Grand Voyager, second generation, factory photo
Factory color shown

1991–1995 Grand Voyager van (second generation)

1991–1995van (4 doors)178.1 in (4,525 mm)

The second generation Chrysler Grand Voyager is the shortest of the catalog, at 178.1 in (4,525 mm). A full wrap of this four-door van uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. The sliding side door tracks stay bare, so the film is cut along them. This smaller body still has a tall roofline that requires a platform for roof application.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Chrysler Grand Voyager, first generation, factory photo
Factory color shown

1988–1990 Grand Voyager van (first generation)

1988–1990van (4 doors)176.0 in (4,470 mm)

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Grand Voyager

Not every Grand Voyager wrap job has to cover the whole van. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Grand Voyager: body, cut-outs and film

A Chrysler Grand Voyager vinyl wrap follows the shape of a classic minivan with sliding side doors and a tall roof. The newest body is 203.6 in (5,171 mm) long, which means wide film panels and careful work on the door tracks. Older generations are shorter, from 178.1 in (4,525 mm) to 202.5 in (5,143 mm), so the amount of film changes with each body. Every Grand Voyager has a large roof that is best wrapped from a platform.

Grand Voyager wrap ideas include protecting the front end with paint protection film (PPF) or covering bright trim with a chrome delete. On the fifth generation, every trim has parking sensors in the bumpers, so the film is cut around each sensor. Some trims of that generation also have roof rails and bright decorative moldings that need extra work. The sliding side doors always have tracks that stay bare, and the film is cut along them.

How much vinyl to wrap a Grand Voyager depends on the generation and the film pattern. A full wrap of the newest body uses about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, while the fourth generation needs about 74 ft (22.5 m). The third generation uses about 70 ft (21.5 m), and the second generation uses about 69 ft (21 m). Chrome or patterned film adds about 15 percent to the total length.

Questions about wrapping a Chrysler Grand Voyager

How much vinyl does it take to wrap a Chrysler Grand Voyager?

It takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film to wrap the newest Chrysler Grand Voyager. That figure is for a full color change wrap on the sixth generation body. Chrome or patterned film for the same van needs about 92 ft (28 m).

Are the sliding doors of a Grand Voyager wrapped?

Yes, the sliding doors of a Grand Voyager are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close smoothly. This applies to all generations in the catalog.

Can I wrap only the hood or the roof of a Grand Voyager?

Yes, you can wrap only the hood or the roof of a Grand Voyager. A partial wrap often covers the roof, hood, or mirror caps. Another option is a chrome delete on the window trim and badges.

Is a Grand Voyager hard to wrap?

A Grand Voyager is not the easiest van to wrap because of its tall body and sliding door tracks. The roof is wrapped from a platform, and the tracks require precise cutting. On some generations, there are extra cut-outs for sensors, cameras, or fog lamps.