Wraps by car

Chrysler Concorde wrap

This page covers the Chrysler Concorde wrap for both generations of the luxury sedan: the 1992–1997 first generation and the 1998–2004 second generation. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, or about 72 ft (22 m) of chrome or patterned film.

2generations18 mof film for a full wrap

Chrysler Concorde, second generation, factory photo
Chrysler Concorde, second generation. Factory color shown.

Chrysler Concorde wrap colors and ideas

  • Concorde black wrap
  • Concorde white wrap
  • Concorde gray wrap
  • Concorde silver wrap
  • Concorde red wrap
  • Concorde blue wrap
  • Concorde green wrap
  • Concorde yellow wrap
  • Concorde orange wrap
  • Concorde purple wrap
  • Concorde pink wrap
  • Concorde teal wrap
  • Concorde brown wrap
  • Concorde gold wrap
  • Concorde chrome wrap
  • Concorde color shift wrap
  • Concorde carbon fiber wrap
  • Concorde camo and patterned wrap

How much vinyl to wrap a Chrysler Concorde

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004sedan (4 doors)209.1 in (5,310 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1992–1997sedan (4 doors)202.8 in (5,152 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Concorde wrap cost factors

Concorde wrap cost depends on film choice, paint condition, and body work. The long sedan needs more material than a smaller car: about 59 ft (18 m) for a 1998–2004 body. Removing trim, badges, and lights for a clean install adds labor time. A car with original paint, a repaint, or clear coat damage may need paint correction before wrapping.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Concorde wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Concorde, second generation, factory photo
Factory color shown

1998–2004 Concorde sedan (second generation)

1998–2004sedan (4 doors)209.1 in (5,310 mm)

The second generation Chrysler Concorde (1998–2004) is a large luxury sedan that often has aging paint, and panels may be original or repainted. A test spot before a full wrap shows whether the vinyl will lift old paint or reveal defects. The long 209.1 in (5,310 mm) body has four doors, a large hood, and a wide roof that add film area.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Chrysler Concorde, first generation, factory photo
Factory color shown

1992–1997 Concorde sedan (first generation)

1992–1997sedan (4 doors)202.8 in (5,152 mm)

The first generation Chrysler Concorde (1992–1997) is a 202.8 in (5,152 mm) four-door sedan with a large body, so a full wrap takes more film and more panels than a compact car. The hood, roof, trunk, and four doors are all large flat panels that are easy to cover. The wrap estimate is about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Concorde

A partial wrap on the Chrysler Concorde covers the roof, hood, and mirror caps without wrapping the entire car. Chrome delete uses black film on the window trim and badges to change the bright trim. Paint protection film (PPF) on the front end protects the hood, bumper, and fenders from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Concorde: body, cut-outs and film

The Chrysler Concorde vinyl wrap uses film on a large four-door sedan body. The second generation is 209.1 in (5,310 mm) long and the first generation is 202.8 in (5,152 mm) long, so the wrap covers long roof and quarter panels. The four doors and deep bumpers add more film area than a smaller car.

Concorde wrap ideas often start with the long roof, hood, and trunk, which are flat and take film cleanly. The door handles, badges, and window trim need cut-outs or removal for a neat edge. The side mirrors and front bumper come off to wrap around edges without stretching the film too thin.

How much vinyl to wrap a Concorde depends on the generation size. A second generation (1998–2004) takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, while a first generation (1992–1997) takes about 57 ft (17.5 m). Adding chrome or patterned film raises the estimate to about 72 ft (22 m) or 70 ft (21.5 m).

Questions about wrapping a Chrysler Concorde

How much vinyl does it take to wrap a Chrysler Concorde?

A full wrap of a Chrysler Concorde takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for the newest body, the 1998–2004 generation. If you choose chrome or patterned film, plan for about 72 ft (22 m) to match the pattern direction. The first generation (1992–1997) takes slightly less: about 57 ft (17.5 m) of standard cast film.

Can I wrap only the hood or the roof of a Concorde?

Yes, you can wrap only the hood or the roof of a Concorde as a partial wrap. A partial wrap often includes the roof, hood, and mirror caps, while a chrome delete covers the window trim and badges. Clear paint protection film (PPF) can be applied just to the front end for stone chip protection.

Is a Concorde hard to wrap?

A Concorde is not a hard car to wrap, but the large body and long panels add work. The four doors, deep bumpers, and wide roof require careful film handling and more material. The 1998–2004 body is 209.1 in (5,310 mm) long, so you need space to move around the car. Aging paint on a car of these years may need a test spot before full wrapping.

How many generations of the Concorde does this page cover?

This page covers two generations of the Chrysler Concorde: the first generation (1992–1997) and the second generation (1998–2004). Both generations are four-door luxury sedans, and the film estimates differ slightly between them.