Wraps by car

Chrysler Daytona wrap

This page covers the Chrysler Daytona wrap with the one generation in the catalog. The car was built from 1986 to 1993 as a three-door hatchback. A full vinyl wrap of that body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Chrysler Daytona, first generation, factory photo
Chrysler Daytona, first generation. Factory color shown.

Chrysler Daytona wrap colors and ideas

  • Daytona black wrap
  • Daytona white wrap
  • Daytona gray wrap
  • Daytona silver wrap
  • Daytona red wrap
  • Daytona blue wrap
  • Daytona green wrap
  • Daytona yellow wrap
  • Daytona orange wrap
  • Daytona purple wrap
  • Daytona pink wrap
  • Daytona teal wrap
  • Daytona brown wrap
  • Daytona gold wrap
  • Daytona chrome wrap
  • Daytona color shift wrap
  • Daytona carbon fiber wrap
  • Daytona camo and patterned wrap

How much vinyl to wrap a Chrysler Daytona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1993hatchback (3 doors)178.4 in (4,531 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Daytona wrap cost factors

Daytona wrap cost depends on the size of the car and the film you choose. The body is 178.4 in (4,531 mm) long and takes about 52 ft (16 m) of standard cast film. A chrome or patterned film needs about 59 ft (18 m), which adds work in trimming and alignment.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Daytona wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Daytona, first generation, factory photo
Factory color shown

1986–1993 Daytona hatchback (first generation)

1986–1993hatchback (3 doors)178.4 in (4,531 mm)

The first generation of the Chrysler Daytona was made from 1986 to 1993 as a hatchback. Paint age on a car of these years can vary, with panels original or repainted. A test spot comes before a full wrap to check paint adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Daytona

A partial wrap on a Daytona can cover just the roof, hood, or mirror caps. Daytona chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Daytona: body, cut-outs and film

The Chrysler Daytona vinyl wrap is shaped by the single hatchback body style. The car measures 178.4 in (4,531 mm) long, which sets the size of the side panels. The three-door layout means long doors and a large rear quarter area.

Daytona wrap ideas have to work around a tailgate with the rear glass in it. The film ends at the edge of that glass, so the tailgate needs a cut-out around the window. Each of the two long side doors is one large piece of film.

How much vinyl to wrap a Daytona depends on the generation and condition. The catalog lists only the first generation from 1986 to 1993, so the estimate stays the same. If the car has chrome trim, a chrome film adds about 59 ft (18 m) of material.

Questions about wrapping a Chrysler Daytona

How much vinyl does it take to wrap a Chrysler Daytona?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Chrysler Daytona. That figure fits the first generation hatchback body from 1986 to 1993. Chrome or patterned film would need about 59 ft (18 m) for the same car.

Can I wrap only the hood or the roof of a Daytona?

Yes, you can wrap only the hood or the roof of a Daytona. A partial wrap can cover the roof, hood, or mirror caps. The shop can also do a chrome delete on the window trim and badges.

Is a Daytona hard to wrap?

A Daytona is moderately hard to wrap because of its three-door hatchback shape. The tailgate includes the rear glass, so the film must end cleanly at the edge of the glass. The car is 178.4 in (4,531 mm) long, and the two long side doors each need one large piece of film.

How many generations of the Daytona does this page cover?

This page covers one generation of the Chrysler Daytona, from 1986 to 1993. The catalog lists only the first generation as a hatchback. All wrap estimates on this page refer to that single body style.