Wraps by car

Chrysler Saratoga wrap

The Chrysler Saratoga wrap page covers the first generation, produced from 1989 to 1995. This mid-size sedan has four doors and measures 181.1 in (4,600 mm) long. A full vinyl wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 64 ft (19.5 m).

1generations15.5 mof film for a full wrap

Chrysler Saratoga, first generation, factory photo
Chrysler Saratoga, first generation. Factory color shown.

Chrysler Saratoga wrap colors and ideas

  • Saratoga black wrap
  • Saratoga white wrap
  • Saratoga gray wrap
  • Saratoga silver wrap
  • Saratoga red wrap
  • Saratoga blue wrap
  • Saratoga green wrap
  • Saratoga yellow wrap
  • Saratoga orange wrap
  • Saratoga purple wrap
  • Saratoga pink wrap
  • Saratoga teal wrap
  • Saratoga brown wrap
  • Saratoga gold wrap
  • Saratoga chrome wrap
  • Saratoga color shift wrap
  • Saratoga carbon fiber wrap
  • Saratoga camo and patterned wrap

How much vinyl to wrap a Chrysler Saratoga

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1995sedan (4 doors)181.1 in (4,600 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Saratoga wrap cost factors

Saratoga wrap cost depends on the size of the car and the film you choose. At 181.1 in (4,600 mm) long, this sedan needs about 51 ft (15.5 m) of standard cast film. A chrome or patterned film raises the amount to about 64 ft (19.5 m). Installer labor also varies with the condition of the 1989–1995 body panels.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Saratoga wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Saratoga, first generation, factory photo
Factory color shown

1989–1995 Saratoga sedan (first generation)

1989–1995sedan (4 doors)181.1 in (4,600 mm)

The first generation Chrysler Saratoga, sold from 1989 to 1995, is a four-door mid-size sedan. These cars are now over 25 years old, so paint may be original or repainted. A test spot is essential before you commit to a full wrap, because old paint can lift when the vinyl is removed. Check the hood and roof for clear coat failure before the install.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Saratoga

A partial wrap on a Saratoga can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges get covered with black film. Paint protection film (PPF) is a clear option for the front end, including the bumper and part of the hood. These smaller jobs let you change the look without wrapping the whole sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Saratoga: body, cut-outs and film

A Chrysler Saratoga vinyl wrap covers one body style: a four-door sedan. The 181.1 in (4,600 mm) length makes it a mid-size car, so a full wrap needs careful handling of the roof and doors. The four doors add seams and edges where vinyl must be tucked. A single body style simplifies film calculation compared to cars with multiple shapes.

Saratoga wrap ideas start with the sedan’s standard trim, including window moldings and door handles. The door handles and mirrors must come off for a clean, long-lasting install. The bumpers and grille area need cut-outs for sensors and trim, but the wrap can be done without removing the bumpers. Pay attention to the window trim, as it is a common place for lifting if not wrapped properly.

If you want to know how much vinyl to wrap a Saratoga, note that this page covers one generation only. The 1989–1995 sedan is the sole body style, so the film estimate stays consistent across those years. There is no second generation to compare, so the 51 ft (15.5 m) figure applies to every car from this period. That means no adjustment is needed for older or newer shapes.

Questions about wrapping a Chrysler Saratoga

How much vinyl does it take to wrap a Chrysler Saratoga?

To wrap a Chrysler Saratoga you need about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. That figure matches the first generation sedan from 1989 to 1995. If you pick a chrome or patterned film, the amount goes up to about 64 ft (19.5 m).

Can I wrap only the hood or the roof of a Saratoga?

Yes, you can wrap only the hood or the roof of a Saratoga. A partial wrap often covers the roof, hood, or mirror caps. A chrome delete is another option, where the window trim and badges are covered with black film. Paint protection film (PPF) is a clear choice for just the front end.

Is a Saratoga hard to wrap?

Yes, a Saratoga is harder to wrap than a newer car because of its age. The 1989–1995 sedan may have original or repainted paint, so a test spot is a must. The four doors and 181.1 in (4,600 mm) length mean more seams and edges to tuck. Door handles and mirrors must come off for a clean install.

How many generations of the Saratoga does this page cover?

This page covers one generation of the Chrysler Saratoga. The first generation was produced from 1989 to 1995. It is the only generation in this catalog, so all details here refer to that model.