Wraps by car

Chrysler Sebring wrap

The Chrysler Sebring wrap page covers three generations of this mid-size car from 1995 to 2010. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the convertible and up to 59 ft (18 m) for the sedan, using 60-inch (1.52 m) cast film. Chrome or patterned film can need up to about 69 ft (21 m).

3generations15.5 mof film for a full wrap

Chrysler Sebring, third generation, factory photo
Chrysler Sebring, third generation. Factory color shown.

Chrysler Sebring wrap colors and ideas

  • Sebring black wrap
  • Sebring white wrap
  • Sebring gray wrap
  • Sebring silver wrap
  • Sebring red wrap
  • Sebring blue wrap
  • Sebring green wrap
  • Sebring yellow wrap
  • Sebring orange wrap
  • Sebring purple wrap
  • Sebring pink wrap
  • Sebring teal wrap
  • Sebring brown wrap
  • Sebring gold wrap
  • Sebring chrome wrap
  • Sebring color shift wrap
  • Sebring carbon fiber wrap
  • Sebring camo and patterned wrap

How much vinyl to wrap a Chrysler Sebring

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010convertible, sedan (2 or 4 doors)190.9 in (4,850 mm) to 194.1 in (4,930 mm)about 51 ft (15.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
2000–2006convertible, coupe, sedan (2 or 4 doors)190.2 in (4,830 mm) to 193.7 in (4,921 mm)about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1995–2000convertible, coupe (2 doors)187.4 in (4,760 mm) to 193.0 in (4,902 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the convertible, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Sebring wrap cost factors

The Sebring wrap cost depends on the size of the body, the amount of film, and the labor for preparation. A third generation sedan can require up to 59 ft (18 m) of film, while the first generation coupe needs about 49 ft (15 m). Convertible tops are not wrapped, but folding hard tops add separate panels. The age of the paint on older cars may require extra surface preparation.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Sebring wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Sebring, third generation, factory photo
Factory color shown

2006–2010 Sebring convertible, sedan (third generation)

2006–2010convertible, sedan (2 or 4 doors)190.9 in (4,850 mm) to 194.1 in (4,930 mm)

On a convertible Sebring, the fabric top is not wrapped in vinyl. The wrap film stops cleanly at the edge where the top meets the painted body. A folding hard top is a separate surface, so each panel of the top gets its own piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 51 ft (15.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Chrysler Sebring, second generation, factory photo
Factory color shown

2000–2006 Sebring convertible, coupe, sedan (second generation)

2000–2006convertible, coupe, sedan (2 or 4 doors)190.2 in (4,830 mm) to 193.7 in (4,921 mm)

The second generation Sebring was restyled in 2003, changing the bumpers and lights. That means film patterns cut for a 2000–2003 car will not fit a 2003–2006 car. An installer must match the film kit to the exact version of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tall body (70.5 in (1,790 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Chrysler Sebring, first generation, factory photo
Factory color shown

1995–2000 Sebring convertible, coupe (first generation)

1995–2000convertible, coupe (2 doors)187.4 in (4,760 mm) to 193.0 in (4,902 mm)

On a first generation Sebring from 1995–2000, the paint may be original or repainted after years of use. Repainted panels can have different surface adhesion, so a test spot is done before the full wrap. That test shows whether the film will stick evenly across every panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the convertible, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Sebring

A partial wrap on a Chrysler Sebring can cover just the roof, hood, or mirror caps. A chrome delete turns the bright window trim and badges black with film. Clear paint protection film (PPF) on the front end shields the hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Sebring: body, cut-outs and film

The Chrysler Sebring vinyl wrap is shaped by the body styles and sizes of each generation. The third generation runs 190.9 in (4,850 mm) to 194.1 in (4,930 mm) long, so the sedan needs more film than the convertible. The first generation is shorter at 187.4 in (4,760 mm) to 193.0 in (4,902 mm), which reduces the amount of film.

Sebring wrap ideas start with the parts that need cut-outs or come off the car. The door handles, mirrors, badges, and trim pieces are removed before wrapping, and the film is cut around lights and vents. Convertible bodies have a fabric top that is never wrapped, so the film ends where the top begins. A folding hard top is wrapped as separate panels.

Knowing how much vinyl to wrap a Sebring means comparing the three generations. The first generation coupe needs about 49 ft (15 m) and the convertible about 51 ft (15.5 m). The second generation is larger, taking about 51 ft (15.5 m) for the convertible and up to 54 ft (16.5 m) for the sedan. The third generation sedan uses the most film at up to 59 ft (18 m).

Questions about wrapping a Chrysler Sebring

How much vinyl does it take to wrap a Chrysler Sebring?

It takes about 51 ft (15.5 m) for the convertible and up to 59 ft (18 m) for the sedan of the newest Sebring generation. These figures are for a full wrap using 60-inch (1.52 m) cast vinyl film. Chrome or patterned film can increase the amount up to about 69 ft (21 m).

Is the top of a Sebring wrapped?

No, the fabric top of a Sebring convertible is not wrapped. The vinyl film ends where the fabric top begins. A folding hard top, if fitted, is wrapped as its own panels.

Which Sebring body takes more film?

The sedan takes more film than the convertible in each generation. In the third generation, the sedan needs up to 59 ft (18 m) while the convertible takes about 51 ft (15.5 m). The first generation coupe uses the least film at about 49 ft (15 m).

Can I wrap only the hood or the roof of a Sebring?

Yes, you can wrap only the hood or the roof of a Sebring. A partial wrap can also cover the mirror caps alone. The roof and hood are flat enough to be wrapped as single pieces on most models.