Wraps by car

Chrysler Cirrus wrap

This page covers the Chrysler Cirrus wrap and the vinyl wrap materials for its single generation. The Cirrus was produced from 1995 to 2000 as a mid-size sedan with four doors. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The car is 187.0 in (4,750 mm) long, which matters for panel sizing.

1generations16 mof film for a full wrap

Chrysler Cirrus, first generation, factory photo
Chrysler Cirrus, first generation. Factory color shown.

Chrysler Cirrus wrap colors and ideas

  • Cirrus black wrap
  • Cirrus white wrap
  • Cirrus gray wrap
  • Cirrus silver wrap
  • Cirrus red wrap
  • Cirrus blue wrap
  • Cirrus green wrap
  • Cirrus yellow wrap
  • Cirrus orange wrap
  • Cirrus purple wrap
  • Cirrus pink wrap
  • Cirrus teal wrap
  • Cirrus brown wrap
  • Cirrus gold wrap
  • Cirrus chrome wrap
  • Cirrus color shift wrap
  • Cirrus carbon fiber wrap
  • Cirrus camo and patterned wrap

How much vinyl to wrap a Chrysler Cirrus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000sedan (4 doors)187.0 in (4,750 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Cirrus wrap cost factors

Cirrus wrap cost depends on the size of the car and the film you choose. The sedan is 187.0 in (4,750 mm) long and needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 66 ft (20 m). Paint condition also matters, because older panels may need more prep.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Cirrus wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Cirrus, first generation, factory photo
Factory color shown

1995–2000 Cirrus sedan (first generation)

1995–2000sedan (4 doors)187.0 in (4,750 mm)

The first-generation Chrysler Cirrus sedan was produced from 1995 to 2000. On a car of these years the panels may be original or repainted. A test spot comes before a full wrap to check how the film adheres. The paint age is the main thing to inspect on this generation.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Cirrus

A partial wrap on the Cirrus can cover the roof, hood, or mirror caps. Cirrus chrome delete is a smaller job for the window trim and badges. Paint protection film (PPF) is a clear film for the front end. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Cirrus: body, cut-outs and film

The Chrysler Cirrus vinyl wrap job is shaped by its four-door sedan body and 187.0 in (4,750 mm) length. The roof, hood, trunk and door panels are all moderate in size for a mid-size car. You can wrap the Cirrus with standard-width rolls without needing extra-wide film. Its clean body lines keep the layout straightforward for a full color change.

Cirrus wrap ideas often start with handling the door handles, mirror caps, and trim. The door handles are simple pull types that come off with basic tools. The mirror caps can be wrapped on the car or removed for cleaner edges. The side window trim is worth covering if you plan a chrome delete.

To work out how much vinyl to wrap a Cirrus, count the body styles in the catalog. Only one generation and one body style exist for this car: the four-door sedan from 1995 to 2000. That means you do not add film for a coupe or wagon version. A single figure covers every Cirrus body in these years.

Questions about wrapping a Chrysler Cirrus

How much vinyl does it take to wrap a Chrysler Cirrus?

A Chrysler Cirrus takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film increases the estimate to about 66 ft (20 m). The car is 187.0 in (4,750 mm) long, which sets the width of the panels.

Can I wrap only the hood or the roof of a Cirrus?

Yes, you can wrap only the hood or the roof of a Cirrus. A partial wrap on this car covers the roof, hood, or mirror caps. Those smaller jobs use less film than a full wrap. The hood and roof have simple shapes that suit a partial job.

Is a Cirrus hard to wrap?

A Cirrus is not hard to wrap, but its age adds work. The body is a plain four-door sedan with no complex curves. The main extra step is checking paint adhesion on a car from 1995 to 2000. A test spot is needed before the full wrap.

How many generations of the Cirrus does this page cover?

This page covers one generation of the Chrysler Cirrus. The catalog lists only the first generation, produced from 1995 to 2000. That is the only body style offered for this car.