Wraps by car

Chrysler LHS wrap

The Chrysler LHS wrap page covers the full-size sedan across its two generations. A complete vinyl wrap of either generation uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for a full wrap needs about 72 ft (22 m). Both generations were built only as a four-door sedan.

2generations17.5 mof film for a full wrap

Chrysler LHS, second generation, factory photo
Chrysler LHS, second generation. Factory color shown.

Chrysler LHS wrap colors and ideas

  • Chrysler LHS black wrap
  • Chrysler LHS white wrap
  • Chrysler LHS gray wrap
  • Chrysler LHS silver wrap
  • Chrysler LHS red wrap
  • Chrysler LHS blue wrap
  • Chrysler LHS green wrap
  • Chrysler LHS yellow wrap
  • Chrysler LHS orange wrap
  • Chrysler LHS purple wrap
  • Chrysler LHS pink wrap
  • Chrysler LHS teal wrap
  • Chrysler LHS brown wrap
  • Chrysler LHS gold wrap
  • Chrysler LHS chrome wrap
  • Chrysler LHS color shift wrap
  • Chrysler LHS carbon fiber wrap
  • Chrysler LHS camo and patterned wrap

How much vinyl to wrap a Chrysler LHS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2001sedan (4 doors)207.7 in (5,275 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1993–1997sedan (4 doors)207.4 in (5,268 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Chrysler LHS wrap cost factors

Chrysler LHS wrap cost is driven by the size of the car, the film family and how much of the trim is removed. A full-size sedan in the 207 in (5,258 mm) range takes more material than a smaller car, and a chrome or patterned film is cut from about 72 ft (22 m) instead of 57 ft (17.5 m). Whether the exterior is original or repainted changes the prep work before the wrap. Partial jobs on the roof or hood and paint protection film on the front end use less material than a full color change.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Chrysler LHS wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler LHS, second generation, factory photo
Factory color shown

1998–2001 Chrysler LHS sedan (second generation)

1998–2001sedan (4 doors)207.7 in (5,275 mm)

The second-generation Chrysler LHS ran from 1998 through 2001 and kept the full-size sedan body of the first generation. Paint age matters on a car of these years because panels may be original or repainted. Before a full wrap, a test spot on the paint checks whether the surface is sound enough for the film to hold. A wrap cannot fix failing clear coat, so deep chips or peeling areas are corrected first.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Chrysler LHS, first generation, factory photo
Factory color shown

1993–1997 Chrysler LHS sedan (first generation)

1993–1997sedan (4 doors)207.4 in (5,268 mm)

The first-generation Chrysler LHS was built from 1993 to 1997 as the same four-door full-size sedan. The 207.4 in (5,268 mm) length and the slab-sided body design mean large hood, roof and door panels that add up to about 57 ft (17.5 m) of film. Because there are no extra body styles, the number of panels is identical on every first-generation LHS. A wrap installer treats the chrome bumpers and bright window trim as either covered or masked items.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Chrysler LHS

A partial wrap on a Chrysler LHS is often the roof, hood, mirror caps or a combination of those. A chrome delete covers the window trim and badges with black film for a different look on the large sedan. Paint protection film (PPF) on the front end shields the hood, fenders and mirror caps with clear film. All of these jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler LHS: body, cut-outs and film

A Chrysler LHS vinyl wrap covers a long four-door sedan with a large roof, hood, trunk and tall sides. The 207.7 in (5,275 mm) length of the second generation means several long panels that call for wide 60-inch (1.52 m) film. Because the car is a single body style, film use is consistent from one LHS to another. The first generation is only 0.3 in (8 mm) shorter, so panel sizes are nearly the same.

Chrysler LHS wrap ideas often start with the large chrome grille and window trim that can be covered or left bright. Door handles, mirrors and the wraparound tail lights need cut-outs, and the front and rear bumpers are best wrapped off the car. The badges stay off during the wrap and go back on after the film is laid down. The same parts apply to both generations because the body architecture did not change.

How much vinyl to wrap a Chrysler LHS depends on which generation you have and whether you use solid or patterned film. Both generations share the same estimate: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for solid colors. Chrome or patterned film with a directional design needs about 72 ft (22 m) because the material is matched in orientation. A nearly identical length of each generation means the film count does not change between 1993 and 2001.

Questions about wrapping a Chrysler LHS

How much vinyl does it take to wrap a Chrysler LHS?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Chrysler LHS in a solid color. A chrome or patterned film for the same car calls for about 72 ft (22 m) because the pattern or finish is aligned. The figure applies to both the 1993–1997 and 1998–2001 generations. The car is a full-size four-door sedan, so there is no shorter or longer body style.

Can I wrap only the hood or the roof of a Chrysler LHS?

Yes, you can wrap only the hood or the roof of a Chrysler LHS. A partial wrap on this car also includes mirror caps or a combination of the roof, hood and caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) is another partial option, placed on the front end in clear film.

Is a Chrysler LHS hard to wrap?

A Chrysler LHS is not especially hard to wrap, but the size adds work. The 207 in (5,258 mm) length and the tall, flat sides mean large panels that are simpler to cover than deep curves. The chrome grille and window trim take extra time if they are wrapped or removed, and the bumpers are easier to do off the car. The wide body and long roof use full-width 60-inch (1.52 m) film with fewer seams.

How many generations of the Chrysler LHS does this page cover?

This page covers two generations of the Chrysler LHS. The first generation was produced from 1993 to 1997, and the second from 1998 to 2001. Both generations are the same full-size four-door sedan, so the wrap data is shared. The catalog includes the newest body, which is the 1998–2001 generation.