Wraps by car

Chrysler Intrepid wrap

This page covers the Chrysler Intrepid wrap for both generations of the full-size sedan. The second generation ran from 1998 to 2004 and the first from 1993 to 1997. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

2generations17.5 mof film for a full wrap

Chrysler Intrepid, second generation, factory photo
Chrysler Intrepid, second generation. Factory color shown.

Chrysler Intrepid wrap colors and ideas

  • Intrepid black wrap
  • Intrepid white wrap
  • Intrepid gray wrap
  • Intrepid silver wrap
  • Intrepid red wrap
  • Intrepid blue wrap
  • Intrepid green wrap
  • Intrepid yellow wrap
  • Intrepid orange wrap
  • Intrepid purple wrap
  • Intrepid pink wrap
  • Intrepid teal wrap
  • Intrepid brown wrap
  • Intrepid gold wrap
  • Intrepid chrome wrap
  • Intrepid color shift wrap
  • Intrepid carbon fiber wrap
  • Intrepid camo and patterned wrap

How much vinyl to wrap a Chrysler Intrepid

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004sedan (4 doors)203.7 in (5,174 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1993–1997sedan (4 doors)201.7 in (5,124 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Intrepid wrap cost factors

An Intrepid wrap cost depends on the film, the body condition and the labor. This car has a long full-size body of 203.7 in (5,174 mm) or 201.7 in (5,124 mm). The amount of film is about 57 ft (17.5 m) or 56 ft (17 m) of 60-inch (1.52 m) cast film. Extra work like removing trim or fixing paint adds to the cost.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Intrepid wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Intrepid, second generation, factory photo
Factory color shown

1998–2004 Intrepid sedan (second generation)

1998–2004sedan (4 doors)203.7 in (5,174 mm)

The second generation Chrysler Intrepid ran from 1998 to 2004. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The film has to stick to old paint, so surface prep is key. A full wrap takes about 57 ft (17.5 m) of 60-inch film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Chrysler Intrepid, first generation, factory photo
Factory color shown

1993–1997 Intrepid sedan (first generation)

1993–1997sedan (4 doors)201.7 in (5,124 mm)

The first generation Chrysler Intrepid ran from 1993 to 1997. Its size and body style mean a full wrap covers many large panels. The car is 201.7 in (5,124 mm) long with four doors and a trunk. You need about 56 ft (17 m) of 60-inch film for a full wrap.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Intrepid

An Intrepid chrome delete covers the window trim and badges with black film. A partial wrap can cover the roof, hood and mirror caps instead of the whole car. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap of the sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chrysler Intrepid: body, cut-outs and film

The Chrysler Intrepid vinyl wrap has to cover a long four-door sedan body. The second generation measures 203.7 in (5,174 mm) and the first 201.7 in (5,124 mm). Both generations have the same sedan body style, so the number of panels is the same. A full wrap covers the roof, hood, trunk, bumpers, fenders, doors and rocker panels.

Intrepid wrap ideas start with the parts that need cut-outs or come off. Door handles, mirrors, badges, antenna and lights are removed or cut around for a clean install. The bumpers and side skirts can stay on, but edges must be wrapped carefully. A chrome delete covers the window trim and badges with black film.

To know how much vinyl to wrap an Intrepid, compare the two generations. The second generation needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The first generation needs about 56 ft (17 m) of the same film. For chrome or patterned film, both generations need about 70 ft (21.5 m).

Questions about wrapping a Chrysler Intrepid

How much vinyl does it take to wrap a Chrysler Intrepid?

A full wrap of the newest Chrysler Intrepid takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. That is for the second generation body from 1998 to 2004. The first generation needs about 56 ft (17 m).

Can I wrap only the hood or the roof of an Intrepid?

Yes, an Intrepid can get a partial wrap of the roof, hood and mirror caps. A chrome delete is also a smaller job on the window trim and badges. Paint protection film (PPF) on the front end is another option. These jobs cover less than the full sedan body.

Is an Intrepid hard to wrap?

The Intrepid has a long full-size body, so a full wrap takes time and care. The first generation is 201.7 in (5,124 mm) and the second is 203.7 in (5,174 mm). Door handles, mirrors, badges and lights all need cut-outs or removal. The size and the trim work add labor to the job.

How many generations of the Intrepid does this page cover?

This page covers two generations of the Chrysler Intrepid. The first generation ran from 1993 to 1997. The second generation ran from 1998 to 2004.