Wraps by car

Chrysler ES wrap

The Chrysler ES wrap page covers the 1988–1991 hatchback, the only generation in the catalog. A vinyl wrap of this compact three-door car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 62 ft (19 m) of material.

1generations15 mof film for a full wrap

Chrysler ES, first generation, factory photo
Chrysler ES, first generation. Factory color shown.

Chrysler ES wrap colors and ideas

  • Chrysler ES black wrap
  • Chrysler ES white wrap
  • Chrysler ES gray wrap
  • Chrysler ES silver wrap
  • Chrysler ES red wrap
  • Chrysler ES blue wrap
  • Chrysler ES green wrap
  • Chrysler ES yellow wrap
  • Chrysler ES orange wrap
  • Chrysler ES purple wrap
  • Chrysler ES pink wrap
  • Chrysler ES teal wrap
  • Chrysler ES brown wrap
  • Chrysler ES gold wrap
  • Chrysler ES chrome wrap
  • Chrysler ES color shift wrap
  • Chrysler ES carbon fiber wrap
  • Chrysler ES camo and patterned wrap

How much vinyl to wrap a Chrysler ES

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1991hatchback (3 doors)171.7 in (4,361 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Chrysler ES wrap cost factors

Chrysler ES wrap cost depends on the size of the car, the film type, and the condition of the body. The ES is a compact three-door hatchback, measuring 171.7 in (4,361 mm) in length. A full wrap takes about 49 ft (15 m) of standard cast film, or about 62 ft (19 m) with chrome or patterned film. The condition of the paint and the amount of trim also affect the work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Chrysler ES wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler ES, first generation, factory photo
Factory color shown

1988–1991 Chrysler ES hatchback (first generation)

1988–1991hatchback (3 doors)171.7 in (4,361 mm)

The first generation Chrysler ES was built from 1988 to 1991, and its paint may be original or repainted. On a car of these years a test spot comes before a full wrap. The body is a three-door hatchback, 171.7 in (4,361 mm) long. It needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Chrysler ES

A partial wrap on a Chrysler ES can cover the roof, hood, or mirror caps on their own. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look without wrapping every panel.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chrysler ES: body, cut-outs and film

A Chrysler ES vinyl wrap on the 171.7 in (4,361 mm) hatchback body needs careful sizing of the film panels. The car has two long side doors, so each door is one large piece of film. The tailgate includes the rear glass, and the film ends at the edge of the glass. The compact size of the ES keeps the wrap smaller than on a large sedan.

Chrysler ES wrap ideas begin with the tailgate and the two long side doors. The tailgate has its rear glass in it, so the film ends at the edge of the glass. Each side door is wrapped as one large piece of film without seams. These areas are the main panels you will cut and fit.

How much vinyl to wrap a Chrysler ES depends on the generation, and this page covers one generation from 1988 to 1991. The body is a three-door hatchback with a length of 171.7 in (4,361 mm). A color change wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the amount to about 62 ft (19 m).

Questions about wrapping a Chrysler ES

How much vinyl does it take to wrap a Chrysler ES?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Chrysler ES, based on the newest body in the catalog. If you use chrome or patterned film, plan for about 62 ft (19 m). These figures cover the full exterior of the three-door hatchback.

Can I wrap only the hood or the roof of a Chrysler ES?

Yes, the hood or the roof of a Chrysler ES can be wrapped on its own, along with mirror caps. A partial wrap is a smaller job than a full wrap. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end.

Is a Chrysler ES hard to wrap?

A Chrysler ES adds work because of its tailgate with the rear glass in it and its two long side doors. The film must end at the edge of the glass on the tailgate. Each long door is one large piece of film that needs careful handling. The car is compact at 171.7 in (4,361 mm), so the total area is not large, but the panels need precise cutting.

How many generations of the Chrysler ES does this page cover?

This page covers one generation of the Chrysler ES, the first generation from 1988 to 1991. It is a three-door hatchback, and all the film amounts on this page apply to this body.