Wraps by car

Chrysler Imperial Crown wrap

This page covers the Chrysler Imperial Crown wrap for the 1963–1965 first generation. The car is a luxury coupe with two doors and a length of 227.8 in (5,786 mm). A full vinyl wrap of this body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Chrysler Imperial Crown, first generation, factory photo
Chrysler Imperial Crown, first generation. Factory color shown.

Chrysler Imperial Crown wrap colors and ideas

  • Imperial Crown black wrap
  • Imperial Crown white wrap
  • Imperial Crown gray wrap
  • Imperial Crown silver wrap
  • Imperial Crown red wrap
  • Imperial Crown blue wrap
  • Imperial Crown green wrap
  • Imperial Crown yellow wrap
  • Imperial Crown orange wrap
  • Imperial Crown purple wrap
  • Imperial Crown pink wrap
  • Imperial Crown teal wrap
  • Imperial Crown brown wrap
  • Imperial Crown gold wrap
  • Imperial Crown chrome wrap
  • Imperial Crown color shift wrap
  • Imperial Crown carbon fiber wrap
  • Imperial Crown camo and patterned wrap

How much vinyl to wrap a Chrysler Imperial Crown

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1965coupe (2 doors)227.8 in (5,786 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Imperial Crown wrap cost factors

The Imperial Crown wrap cost depends on the size of the coupe body and the film amount. A full wrap takes about 62 ft (19 m), and chrome or patterned film raises the amount to about 80 ft (24.5 m). The condition of the original paint also affects the preparation work before vinyl is applied.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Imperial Crown wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Imperial Crown, first generation, factory photo
Factory color shown

1963–1965 Imperial Crown coupe (first generation)

1963–1965coupe (2 doors)227.8 in (5,786 mm)

The first-generation 1963–1965 Imperial Crown has a body that may have original or repainted panels. Paint age is a key point for a wrap because old paint can lift when film is removed. A test spot on a small panel comes before a full wrap on a car of these years.

Two long side doors: each door is one large piece of film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an Imperial Crown

A partial wrap on a Chrysler Imperial Crown can cover the long roof and hood on the coupe body. Chrome delete works well on the window trim and badges; paint protection film (PPF) in clear film protects the front end. These jobs use less vinyl than a full wrap of the Imperial Crown.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chrysler Imperial Crown: body, cut-outs and film

The Chrysler Imperial Crown vinyl wrap must handle a long body with two large side doors. The coupe body has a simple shape with long flat panels that take film well. The overall length of 227.8 in (5,786 mm) means you need extra film for the sides.

For Imperial Crown wrap ideas, start with the two long side doors. Each door is one large piece of film without a window frame cut-out. The vinyl can flow cleanly over the door handles and locks, and no parts need to come off for a full wrap.

To know how much vinyl to wrap an Imperial Crown, compare the 1963–1965 coupe bodies across the first generation. The body length and the door size are the same for all three production years. Film use stays close to about 62 ft (19 m) for a full color change wrap.

Questions about wrapping a Chrysler Imperial Crown

How much vinyl does it take to wrap a Chrysler Imperial Crown?

A full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. This amount covers the 1963–1965 Chrysler Imperial Crown coupe body. For chrome or patterned film, allow about 80 ft (24.5 m).

Can I wrap only the hood or the roof of an Imperial Crown?

Yes, you can wrap only the hood or the roof of an Imperial Crown. The partial wrap options for this car include the roof, hood, and mirror caps. A hood-only or roof-only job uses less film than a full wrap.

Is an Imperial Crown hard to wrap?

The Imperial Crown is not hard to wrap, but the long doors add work. Each side door is one large piece of film, and the body length of 227.8 in (5,786 mm) calls for careful handling. The coupe shape has no complex curves that complicate the install.

How many generations of the Imperial Crown does this page cover?

This page covers one generation of the Chrysler Imperial Crown. The catalog lists the first generation from 1963 to 1965. It is the only body covered for this model.