Wraps by car

Chrysler Newport wrap

The Chrysler Newport wrap page spans six generations of this luxury car from 1960 to 1981. The newest body, a 1978–1981 sedan, takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl wrap. A chrome or patterned film on that body uses about 80 ft (24.5 m). Each generation has its own panel plan and film estimate.

6generations

Chrysler Newport, sixth generation, factory photo
Chrysler Newport, sixth generation. Factory color shown.

Chrysler Newport wrap colors and ideas

  • Newport black wrap
  • Newport white wrap
  • Newport gray wrap
  • Newport silver wrap
  • Newport red wrap
  • Newport blue wrap
  • Newport green wrap
  • Newport yellow wrap
  • Newport orange wrap
  • Newport purple wrap
  • Newport pink wrap
  • Newport teal wrap
  • Newport brown wrap
  • Newport gold wrap
  • Newport chrome wrap
  • Newport color shift wrap
  • Newport carbon fiber wrap
  • Newport camo and patterned wrap

How much vinyl to wrap a Chrysler Newport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1978–1981sedan (4 doors)——
1973–1978sedan (4 doors)226.6 in (5,756 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1968–1973convertible, coupe, sedan (2 or 4 doors)224.7 in (5,707 mm)about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1964–1968convertible, coupe, sedan, wagon (2 or 4 or 5 doors)——
1960–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)214.9 in (5,458 mm)about 57 ft (17.5 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m)
1940–1941convertible (2 doors)——

Newport wrap cost factors

Newport wrap cost depends on the film amount, the body style, and the number of cut-outs. The 1978–1981 sedan needs about 64 ft (19.5 m) of film, while a 1960–1964 wagon needs about 67 ft (20.5 m). Convertible tops and tailgate glass add edge work that changes the labor. Paint condition on older cars can also add preparation time before the film goes on.

  • Body: sedan (4 doors).

Newport wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Newport, sixth generation, factory photo
Factory color shown

1978–1981 Newport sedan (sixth generation)

1978–1981sedan (4 doors)

The sixth generation Chrysler Newport from 1978 to 1981 is a four-door luxury sedan. Paint age matters on a car of these years because panels may be original or repainted. A test spot on the paint comes before a full wrap. This sedan has no convertible or wagon complications to plan around.

Chrysler Newport, fifth generation, factory photo
Factory color shown

1973–1978 Newport sedan (fifth generation)

1973–1978sedan (4 doors)226.6 in (5,756 mm)

The fifth generation Chrysler Newport from 1973 to 1978 is a four-door luxury sedan. Its 226.6 in (5,756 mm) length makes it a large body with long side panels. A full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, or about 80 ft (24.5 m) for chrome or patterned film. The four doors and long hood add to the number of panels you handle.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Chrysler Newport, fourth generation, factory photo
Factory color shown

1968–1973 Newport convertible, coupe, sedan (fourth generation)

1968–1973convertible, coupe, sedan (2 or 4 doors)224.7 in (5,707 mm)

The fourth generation Chrysler Newport from 1968 to 1973 offers convertible, coupe, and sedan styles. On a convertible, a fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own. The convertible needs about 59 ft (18 m) of film and the sedan about 62 ft (19 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Chrysler Newport, third generation, factory photo
Factory color shown

1964–1968 Newport convertible, coupe, sedan, wagon (third generation)

1964–1968convertible, coupe, sedan, wagon (2 or 4 or 5 doors)

The third generation Chrysler Newport from 1964 to 1968 includes convertible, coupe, sedan, and wagon bodies. The body style decides the panel plan and the film amount for each car. Convertibles have the fabric top rule, and wagons with rear glass in the tailgate need the film to end at the glass edge. A wagon has extra panels on the rear body and tailgate.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Chrysler Newport, second generation, factory photo
Factory color shown

1960–1964 Newport convertible, coupe, sedan, wagon (second generation)

1960–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)214.9 in (5,458 mm)

The second generation Chrysler Newport from 1960 to 1964 is 214.9 in (5,458 mm) long, with convertible, coupe, sedan, and wagon styles. The wagon takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, the most of this generation. The convertible takes about 57 ft (17.5 m), the least. Chrome or patterned film runs up to about 85 ft (26 m) on this body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).

Chrysler Newport, first generation, factory photo
Factory color shown

1940–1941 Newport convertible (first generation)

1940–1941convertible (2 doors)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roof, hood, chrome delete and PPF on a Newport

Newport chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, the hood, or the mirror caps only. Paint protection film is clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chrysler Newport: body, cut-outs and film

The Chrysler Newport vinyl wrap changes with the body style and size of each generation. A 1973–1978 sedan is 226.6 in (5,756 mm) long and needs about 64 ft (19.5 m) of cast film. The 1960–1964 wagon takes about 67 ft (20.5 m), while the convertible of the same years takes about 57 ft (17.5 m). Counting the exact panels before ordering film avoids waste on these large bodies.

Newport wrap ideas must account for the convertible tops and tailgates on some generations. A fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. On wagons with the rear glass in the tailgate, the film ends at the edge of the glass.

How much vinyl to wrap a Newport depends on the generation and body style you have. The fourth generation convertible needs about 59 ft (18 m) of 60-inch (1.52 m) cast film, and the sedan needs about 62 ft (19 m). Chrome or patterned film on that generation can run up to about 79 ft (24 m). Earlier and later generations each have their own figures, so measure from the data for your car.

Questions about wrapping a Chrysler Newport

How much vinyl does it take to wrap a Chrysler Newport?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Chrysler Newport from the newest generation, the 1978–1981 sedan. For chrome or patterned film on the same body, plan about 80 ft (24.5 m). This figure is for the four-door sedan body of that generation.

Can I wrap only the hood or the roof of a Newport?

Yes, you can wrap only the hood or the roof of a Newport. The partial wrap options for this car are the roof, hood, and mirror caps. Chrome delete covers window trim and badges, and paint protection film is clear film on the front end. A smaller job uses less film than a full wrap.

Is a Newport hard to wrap?

A Newport is not especially hard to wrap, but some parts add work. Convertible fabric tops are not wrapped, and the film must end cleanly at the top edge. On wagons with rear glass in the tailgate, the film ends at the edge of the glass. The large size of these bodies also means longer panels and more careful handling.

How many generations of the Newport does this page cover?

This page covers six generations of the Chrysler Newport. They run from 1960 to 1981, from the second generation to the sixth. Each generation has its own body styles and film estimates in the data above.