Wraps by car

Chrysler Windsor wrap

The Chrysler Windsor wrap guide covers all seven generations of this mid-size car, from 1949 to 1961. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that body needs about 67 ft (20.5 m).

7generations17.5 mof film for a full wrap

Chrysler Windsor, seventh generation, factory photo
Chrysler Windsor, seventh generation. Factory color shown.

Chrysler Windsor wrap colors and ideas

  • Windsor black wrap
  • Windsor white wrap
  • Windsor gray wrap
  • Windsor silver wrap
  • Windsor red wrap
  • Windsor blue wrap
  • Windsor green wrap
  • Windsor yellow wrap
  • Windsor orange wrap
  • Windsor purple wrap
  • Windsor pink wrap
  • Windsor teal wrap
  • Windsor brown wrap
  • Windsor gold wrap
  • Windsor chrome wrap
  • Windsor color shift wrap
  • Windsor carbon fiber wrap
  • Windsor camo and patterned wrap

How much vinyl to wrap a Chrysler Windsor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1961convertible, coupe (2 doors)215.4 in (5,471 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1957–1958coupe, sedan (2 or 4 doors)219.2 in (5,568 mm)about 59 ft (18 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)
1955–1956coupe, sedan (2 or 4 doors)218.6 in (5,552 mm)about 66 ft (20 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)
1953–1954coupe, sedan (2 or 4 doors)211.0 in (5,359 mm)about 64 ft (19.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1949–1952convertible, coupe, sedan, wagon (2 or 4 or 5 doors)208.3 in (5,290 mm)about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)
1946–1948convertible, coupe, sedan (2 or 4 doors)208.3 in (5,290 mm)about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)
1939–1942convertible, coupe, sedan, wagon (2 or 4 or 5 doors)202.5 in (5,144 mm)about 54 ft (16.5 m) for the coupe to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Windsor wrap cost factors

Windsor wrap cost depends on the body style, the amount of chrome, and the condition of the paint. The seventh generation convertible has a fabric top that is not wrapped, which reduces the film area. The sixth generation sedan has more panels than the coupe and needs up to about 80 ft (24.5 m) of chrome or patterned film. On a car of the fifth generation years, panels may be original or repainted, and a test spot comes before a full wrap.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Windsor wraps by generation

Swipe sideways. Tap a card for the full description.

Chrysler Windsor, seventh generation, factory photo
Factory color shown

1959–1961 Windsor convertible, coupe (seventh generation)

1959–1961convertible, coupe (2 doors)215.4 in (5,471 mm)

The seventh generation Chrysler Windsor was made from 1959 to 1961 as a convertible or a coupe. The open top of the convertible is not wrapped when it is a fabric top, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. The body is 215.4 in (5,471 mm) long.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Chrysler Windsor, sixth generation, factory photo
Factory color shown

1957–1958 Windsor coupe, sedan (sixth generation)

1957–1958coupe, sedan (2 or 4 doors)219.2 in (5,568 mm)

The sixth generation Chrysler Windsor was produced from 1957 to 1958 as a coupe or a sedan with two or four doors. The body style decides the panel plan and the film amount. A coupe needs about 59 ft (18 m) of 60-inch cast film, while a sedan needs up to 67 ft (20.5 m). The car is 219.2 in (5,568 mm) long.

Film: about 59 ft (18 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Chrysler Windsor, fifth generation, factory photo
Factory color shown

1955–1956 Windsor coupe, sedan (fifth generation)

1955–1956coupe, sedan (2 or 4 doors)218.6 in (5,552 mm)

The fifth generation Chrysler Windsor was built from 1955 to 1956 as a coupe or a sedan with two or four doors. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. The body is 218.6 in (5,552 mm) long. A coupe takes about 66 ft (20 m) of film and a sedan about 67 ft (20.5 m).

Film: about 66 ft (20 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Chrysler Windsor, fourth generation, factory photo
Factory color shown

1953–1954 Windsor coupe, sedan (fourth generation)

1953–1954coupe, sedan (2 or 4 doors)211.0 in (5,359 mm)

The fourth generation Chrysler Windsor was made from 1953 to 1954 as a coupe or a sedan with two or four doors. The size and body style set the amount of film and the number of panels. The car is 211.0 in (5,359 mm) long. A coupe needs about 64 ft (19.5 m) of film and a sedan about 66 ft (20 m).

Film: about 64 ft (19.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Chrysler Windsor, third generation, factory photo
Factory color shown

1949–1952 Windsor convertible, coupe, sedan, wagon (third generation)

1949–1952convertible, coupe, sedan, wagon (2 or 4 or 5 doors)208.3 in (5,290 mm)

The third generation Chrysler Windsor was produced from 1949 to 1952 as a convertible, coupe, sedan, or wagon with two, four, or five doors. The size and body style decide the amount of film and the number of panels. The car is 208.3 in (5,290 mm) long. The convertible takes about 56 ft (17 m) of film and the wagon up to 66 ft (20 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Chrysler Windsor, second generation, factory photo
Factory color shown

1946–1948 Windsor convertible, coupe, sedan (second generation)

1946–1948convertible, coupe, sedan (2 or 4 doors)208.3 in (5,290 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Chrysler Windsor, first generation, factory photo
Factory color shown

1939–1942 Windsor convertible, coupe, sedan, wagon (first generation)

1939–1942convertible, coupe, sedan, wagon (2 or 4 or 5 doors)202.5 in (5,144 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the coupe to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Windsor

A partial wrap on a Chrysler Windsor can cover the roof, hood, or mirror caps. Windsor chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the car. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chrysler Windsor: body, cut-outs and film

A Chrysler Windsor vinyl wrap is planned around the body style and the size of the car. The seventh generation is 215.4 in (5,471 mm) long and has two long side doors, so each door is one large piece of film. The sixth generation is longer at 219.2 in (5,568 mm), and a sedan needs more film than a coupe. The fifth generation measures 218.6 in (5,552 mm) and offered coupe and sedan bodies.

Windsor wrap ideas include handling the convertible top and the tailgate with rear glass. On a convertible, a fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. On the third generation wagon, a tailgate with the rear glass in it means the film ends at the edge of the glass. The two long side doors of the seventh generation are each wrapped as one large piece of film.

If you want to know how much vinyl to wrap a Windsor, the amount changes between generations. The third generation needs about 56 ft (17 m) for the convertible and up to 66 ft (20 m) for the wagon. The fourth generation takes about 64 ft (19.5 m) for the coupe and 66 ft (20 m) for the sedan. The seventh generation uses about 57 ft (17.5 m) of cast film.

Questions about wrapping a Chrysler Windsor

How much vinyl does it take to wrap a Chrysler Windsor?

A Chrysler Windsor needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. This estimate fits the seventh generation, which is 215.4 in (5,471 mm) long. Chrome or patterned film would require about 67 ft (20.5 m).

Is the top of a Windsor wrapped?

The top of a Windsor is not wrapped when the car has a fabric convertible top, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. This applies to the seventh generation convertible and the third generation convertible.

Which Windsor body takes more film?

Among the body styles of the Windsor, a wagon takes more film than a sedan, coupe, or convertible. For the third generation, the wagon needs up to 66 ft (20 m) of cast film, while the convertible takes about 56 ft (17 m). The sixth generation sedan needs up to 67 ft (20.5 m), more than its coupe at about 59 ft (18 m).

Can I wrap only the hood or the roof of a Windsor?

Yes, you can wrap only the hood or the roof of a Chrysler Windsor as a partial wrap. A partial wrap can also cover mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end.