Wraps by car

Mitsubishi 3000 GT wrap

The Mitsubishi 3000 GT wrap guide covers both generations, from 1990 to 1999. A full vinyl wrap on the newest convertible body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. On the newest coupe body the estimate is about 51 ft (15.5 m) of the same film.

2generations15.5 mof film for a full wrap

Mitsubishi 3000 GT, second generation, factory photo
Mitsubishi 3000 GT, second generation. Factory color shown.

Mitsubishi 3000 GT wrap colors and ideas

  • Mitsubishi 3000 GT black wrap
  • Mitsubishi 3000 GT white wrap
  • Mitsubishi 3000 GT gray wrap
  • Mitsubishi 3000 GT silver wrap
  • Mitsubishi 3000 GT red wrap
  • Mitsubishi 3000 GT blue wrap
  • Mitsubishi 3000 GT green wrap
  • Mitsubishi 3000 GT yellow wrap
  • Mitsubishi 3000 GT orange wrap
  • Mitsubishi 3000 GT purple wrap
  • Mitsubishi 3000 GT pink wrap
  • Mitsubishi 3000 GT teal wrap
  • Mitsubishi 3000 GT brown wrap
  • Mitsubishi 3000 GT gold wrap
  • Mitsubishi 3000 GT chrome wrap
  • Mitsubishi 3000 GT color shift wrap
  • Mitsubishi 3000 GT carbon fiber wrap
  • Mitsubishi 3000 GT camo and patterned wrap

How much vinyl to wrap a Mitsubishi 3000 GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–1999convertible, coupe (2 doors)179.7 in (4,565 mm) to 180.7 in (4,590 mm)about 48 ft (14.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1990–1993coupe (2 doors)179.5 in (4,560 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Mitsubishi 3000 GT wrap cost factors

Mitsubishi 3000 GT wrap cost depends on the body style, the film type, and the condition of the paint. A second-generation coupe takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, and a first-generation coupe takes about 49 ft (15 m). Chrome or patterned film pushes the estimate to about 57 ft (17.5 m) on the newest coupe. Extra cut-outs for door handles, mirrors, and badges also affect the labor time.

  • Film for a full wrap: about 48 ft (14.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1998: bumpers and lights differ between the versions, and so do the film cuts.

Mitsubishi 3000 GT wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi 3000 GT, second generation, factory photo
Factory color shown

1994–1999 Mitsubishi 3000 GT convertible, coupe (second generation)

1994–1999convertible, coupe (2 doors)179.7 in (4,565 mm) to 180.7 in (4,590 mm)

The open top of a second-generation Mitsubishi 3000 GT changes where the film ends. A fabric top is not wrapped at all: the vinyl ends where the roof folds back. A folding hard top is wrapped as separate panels, so the film follows each hard section. This keeps the top functional and avoids lifting film at the hinges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Mitsubishi 3000 GT, first generation, factory photo
Factory color shown

1990–1993 Mitsubishi 3000 GT coupe (first generation)

1990–1993coupe (2 doors)179.5 in (4,560 mm)

First-generation Mitsubishi 3000 GT paint from 1990 to 1993 may be original or repainted. Before a full wrap, a test spot on the panel shows whether the film will lift old or weak paint. Paint protection film on the front end is a good first step on these cars. The long doors on this generation still wrap as one large piece each.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Mitsubishi 3000 GT

A Mitsubishi 3000 GT chrome delete covers the window trim and badges with black film. A partial wrap can cover just the roof, hood, or mirror caps on this car. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi 3000 GT: body, cut-outs and film

The Mitsubishi 3000 GT vinyl wrap fits a mid-size two-door body, either coupe or convertible. The car is 179.5 in (4,560 mm) to 180.7 in (4,590 mm) long, so each wrap uses more film than a small car. A second-generation coupe needs about 51 ft (15.5 m) of cast film, while the convertible needs about 48 ft (14.5 m).

Mitsubishi 3000 GT wrap ideas start with the long side doors, which are each wrapped as one large piece of film. The convertible top is not wrapped: on a fabric top the film ends where the top begins. On a folding hard top the hard panels are wrapped as their own pieces.

How much vinyl to wrap a Mitsubishi 3000 GT depends on the generation and the film style. First-generation coupes from 1990 to 1993 take about 49 ft (15 m) of 60-inch (1.52 m) cast film. Second-generation cars from 1994 to 1999 take about 51 ft (15.5 m) for the coupe or about 48 ft (14.5 m) for the convertible. Patterned or chrome film adds about 5 to 6 ft (1.5 to 2 m) on either generation.

Questions about wrapping a Mitsubishi 3000 GT

How much vinyl does it take to wrap a Mitsubishi 3000 GT?

About 48 ft (14.5 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast film wraps a Mitsubishi 3000 GT, depending on the body. The convertible takes about 48 ft (14.5 m) and the coupe about 51 ft (15.5 m) on the second generation. Chrome or patterned film raises the estimate to about 57 ft (17.5 m) for the coupe.

Is the top of a Mitsubishi 3000 GT wrapped?

A fabric top on a Mitsubishi 3000 GT is not wrapped, so the film ends where the top begins. A folding hard top is wrapped as separate panels that follow the roof sections.

Which years of the Mitsubishi 3000 GT take the same film cuts?

1994 to 1999 Mitsubishi 3000 GT models take the same film cuts, with a restyle in 1998 that may affect badging. 1990 to 1993 models use a different body code and film estimate.

Which Mitsubishi 3000 GT body takes more film?

The coupe body of the Mitsubishi 3000 GT takes more film than the convertible. On the second generation, the coupe needs about 51 ft (15.5 m) of cast film while the convertible needs about 48 ft (14.5 m).