Wraps by car

Mitsubishi Airtrek wrap

This page covers a Mitsubishi Airtrek wrap in vinyl wrap. The catalog lists one generation of the Airtrek. A full wrap of the 2001–2005 SUV body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Mitsubishi Airtrek, first generation, factory photo
Mitsubishi Airtrek, first generation. Factory color shown.

Mitsubishi Airtrek wrap colors and ideas

  • Airtrek black wrap
  • Airtrek white wrap
  • Airtrek gray wrap
  • Airtrek silver wrap
  • Airtrek red wrap
  • Airtrek blue wrap
  • Airtrek green wrap
  • Airtrek yellow wrap
  • Airtrek orange wrap
  • Airtrek purple wrap
  • Airtrek pink wrap
  • Airtrek teal wrap
  • Airtrek brown wrap
  • Airtrek gold wrap
  • Airtrek chrome wrap
  • Airtrek color shift wrap
  • Airtrek carbon fiber wrap
  • Airtrek camo and patterned wrap

How much vinyl to wrap a Mitsubishi Airtrek

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2005SUV (5 doors)175.8 in (4,465 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Airtrek wrap cost factors

Airtrek wrap cost depends on the size of the car and the film you pick. The body is 175.8 in (4,465 mm) long, so a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film. The final cost also changes with the amount of disassembly and any badges or trim that come off.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Airtrek wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Airtrek, first generation, factory photo
Factory color shown

2001–2005 Airtrek SUV (first generation)

2001–2005SUV (5 doors)175.8 in (4,465 mm)

The first and only generation of the Airtrek was built from 2001 to 2005. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Paint age decides how the surface is prepared before the film goes on.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Airtrek

Partial jobs on a Mitsubishi Airtrek can be a partial wrap of the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Airtrek: body, cut-outs and film

A Mitsubishi Airtrek vinyl wrap has to cover one SUV body style with five doors. The body is 175.8 in (4,465 mm) long, so the film estimate is about 57 ft (17.5 m). Standard 60-inch (1.52 m) cast film manages the roof, hood, and tall side panels without extra seams.

Airtrek wrap ideas still follow the shape of the tailgate. The tailgate has the rear glass in it, so the film ends at the edge of the glass. For chrome delete, the window trim and badges are covered with black film. The front end can also take clear paint protection film (PPF).

How much vinyl to wrap an Airtrek is easy to check because there is one generation. The film estimate for a full wrap is about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If the design uses chrome or patterned film, plan for about 67 ft (20.5 m).

Questions about wrapping a Mitsubishi Airtrek

How much vinyl does it take to wrap a Mitsubishi Airtrek?

A full wrap of a Mitsubishi Airtrek takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 67 ft (20.5 m).

Can I wrap only the hood or the roof of an Airtrek?

Yes, you can wrap only the hood or the roof of an Airtrek. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap.

Is an Airtrek hard to wrap?

An Airtrek is not too hard to wrap, but the tailgate adds work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The body is 175.8 in (4,465 mm) long, which means large panels like the roof and hood need careful handling.

How many generations of the Airtrek does this page cover?

This page covers one generation of the Mitsubishi Airtrek. That is the 2001–2005 SUV body style with five doors.