Wraps by car

Mitsubishi Bravo wrap

A Mitsubishi Bravo wrap covers this 1989–1990 minivan, a single-generation model. A full wrap of the van body takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. With chrome or patterned film, the estimate rises to about 56 ft (17 m). The page details the body, the sliding-door cut-outs, and the jobs smaller than a full wrap.

1generations15 mof film for a full wrap

Mitsubishi Bravo, first generation, factory photo
Mitsubishi Bravo, first generation. Factory color shown.

Mitsubishi Bravo wrap colors and ideas

  • Bravo black wrap
  • Bravo white wrap
  • Bravo gray wrap
  • Bravo silver wrap
  • Bravo red wrap
  • Bravo blue wrap
  • Bravo green wrap
  • Bravo yellow wrap
  • Bravo orange wrap
  • Bravo purple wrap
  • Bravo pink wrap
  • Bravo teal wrap
  • Bravo brown wrap
  • Bravo gold wrap
  • Bravo chrome wrap
  • Bravo color shift wrap
  • Bravo carbon fiber wrap
  • Bravo camo and patterned wrap

How much vinyl to wrap a Mitsubishi Bravo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1990van (5 doors)129.7 in (3,295 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Bravo wrap cost factors

A Bravo wrap cost depends on the film area, the film type, and the labor of the tall body. The van needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change wrap. Chrome or patterned film increases the film estimate to about 56 ft (17 m). The 76.0 in (1,930 mm) roof height adds platform time to an install.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (76.0 in (1,930 mm)): the roof is wrapped from a platform.

Bravo wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Bravo, first generation, factory photo
Factory color shown

1989–1990 Bravo van (first generation)

1989–1990van (5 doors)129.7 in (3,295 mm)

The first-generation Mitsubishi Bravo (1989–1990) has sliding side doors that set the cut lines. The door tracks stay bare, and the film is cut along them so the doors still slide. The wrap does not cover the runners. This is the only body generation in the catalog.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.0 in (1,930 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Bravo

On the Bravo, partial jobs include a roof, hood, or mirror-cap wrap. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film than a full wrap but still respect the door tracks.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Bravo: body, cut-outs and film

The Mitsubishi Bravo has one body style, a five-door van 129.7 in (3,295 mm) long. Its single body length sets one clear vinyl wrap estimate for the whole model. The tall roof at 76.0 in (1,930 mm) needs a platform when the roof panel is wrapped. A wrap plan on this minivan is not split between body lengths.

The sliding side doors shape every Bravo wrap idea. The door tracks stay bare, so the film is cut along them and never covers the runners. The tall 76.0 in (1,930 mm) body means the roof is wrapped from a platform. No other cut-out is standard on the van.

How much vinyl to wrap a Bravo does not change by year, since the catalog lists one generation. The 1989–1990 van keeps one body length at 129.7 in (3,295 mm). A full wrap of any Bravo takes the same cast-film estimate, about 49 ft (15 m). With chrome or patterned film the film count rises to about 56 ft (17 m).

Questions about wrapping a Mitsubishi Bravo

How much vinyl does it take to wrap a Mitsubishi Bravo?

A full Mitsubishi Bravo wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate is about 56 ft (17 m). The van is 129.7 in (3,295 mm) long with one body style.

Are the sliding doors of a Bravo wrapped?

No, the sliding doors themselves are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can slide. The tracks remain uncovered on every Bravo wrap.

Can I wrap only the hood or the roof of a Bravo?

Yes, you can wrap only the hood or the roof of a Bravo. A partial wrap on this van also covers mirror caps. A chrome delete of the window trim and badges is another smaller job.

Is a Bravo hard to wrap?

A Bravo is not hard to wrap, but it has two specific steps. The sliding-door tracks stay bare and the film is cut along them. Its 76.0 in (1,930 mm) tall roof is wrapped from a platform.