Wraps by car

Mitsubishi Challenger wrap

The Mitsubishi Challenger wrap page covers both generations of this SUV and the film amounts a full wrap takes. The second generation ran from 2008 to 2015, and the first from 1996 to 2001. A full wrap of the newest body uses about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations19 mof film for a full wrap

Mitsubishi Challenger, second generation, factory photo
Mitsubishi Challenger, second generation. Factory color shown.

Mitsubishi Challenger wrap colors and ideas

  • Challenger black wrap
  • Challenger white wrap
  • Challenger gray wrap
  • Challenger silver wrap
  • Challenger red wrap
  • Challenger blue wrap
  • Challenger green wrap
  • Challenger yellow wrap
  • Challenger orange wrap
  • Challenger purple wrap
  • Challenger pink wrap
  • Challenger teal wrap
  • Challenger brown wrap
  • Challenger gold wrap
  • Challenger chrome wrap
  • Challenger color shift wrap
  • Challenger carbon fiber wrap
  • Challenger camo and patterned wrap

How much vinyl to wrap a Mitsubishi Challenger

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2015SUV (5 doors)184.8 in (4,695 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1996–2001SUV (5 doors)178.3 in (4,530 mm) to 181.9 in (4,620 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Challenger wrap cost factors

Challenger wrap cost depends on the film amount, the height of the vehicle, and the preparation work. The second generation is 72.4 in (1,840 mm) tall, so wrapping the roof needs a platform and adds labor. The first generation's length varies from 178.3 in (4,530 mm) to 181.9 in (4,620 mm), which changes the material needed.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Challenger wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Challenger, second generation, factory photo
Factory color shown

2008–2015 Challenger SUV (second generation)

2008–2015SUV (5 doors)184.8 in (4,695 mm)

The second generation Mitsubishi Challenger was restyled in 2013 with new bumpers and lights. Film cut for a pre-2013 vehicle does not fit the later version. This affects how much vinyl to wrap a Challenger because the contours are different.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Mitsubishi Challenger, first generation, factory photo
Factory color shown

1996–2001 Challenger SUV (first generation)

1996–2001SUV (5 doors)178.3 in (4,530 mm) to 181.9 in (4,620 mm)

The first generation Mitsubishi Challenger was built from 1996 to 2001 with a restyling in 1999. On a car of these years, panels may be original or repainted, so paint age varies. A test spot before a full wrap checks how the vinyl adheres to the surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Challenger

Partial wrap options for the Mitsubishi Challenger include the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Challenger: body, cut-outs and film

The Mitsubishi Challenger vinyl wrap job is shaped by the SUV's five-door body and its size. The second generation is 184.8 in (4,695 mm) long, while the first ranges from 178.3 in (4,530 mm) to 181.9 in (4,620 mm). The tall body of the second generation means the roof is wrapped from a platform.

Challenger wrap ideas must account for the tailgate with rear glass in it. The film ends at the edge of the glass on both generations. The second generation is 72.4 in (1,840 mm) tall, so roof work requires a platform.

How much vinyl to wrap a Challenger depends on the generation you have. The second generation uses about 62 ft (19 m) of 60-inch (1.52 m) film, and the first uses about 61 ft (18.5 m). For chrome or patterned film, the second generation takes about 79 ft (24 m) and the first about 70 ft (21.5 m).

Questions about wrapping a Mitsubishi Challenger

How much vinyl does it take to wrap a Mitsubishi Challenger?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl to wrap the newest Mitsubishi Challenger. This figure is for the second generation body from 2008 to 2015. For chrome or patterned film, the amount is about 79 ft (24 m).

Which years of the Challenger take the same film cuts?

The Mitsubishi Challenger generations have different film cuts. The second generation had a restyling in 2013, so 2008–2012 and 2013–2015 vehicles need different cuts. The first generation was restyled in 1999, so 1996–1998 and 1999–2001 vehicles also differ.

Can I wrap only the hood or the roof of a Challenger?

Yes, you can wrap only the hood or the roof of a Mitsubishi Challenger. The roof is a partial wrap job, and the hood is another. Mirror caps can also be wrapped separately.

Is a Challenger hard to wrap?

A Mitsubishi Challenger requires some extra work to wrap. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The second generation is 72.4 in (1,840 mm) tall, so the roof is wrapped from a platform.