Wraps by car

Mitsubishi Chariot wrap

The Mitsubishi Chariot wrap guide covers all three generations of this minivan, from 1983 to 2003. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film, or about 79 ft (24 m) with chrome or patterned film. The Chariot is a five-door van in every generation, and its size makes a full vinyl wrap a substantial project. This page explains the vinyl wrap amounts, the areas that need special attention, and the smaller jobs for the Chariot.

3generations20 mof film for a full wrap

Mitsubishi Chariot, third generation, factory photo
Mitsubishi Chariot, third generation. Factory color shown.

Mitsubishi Chariot wrap colors and ideas

  • Chariot black wrap
  • Chariot white wrap
  • Chariot gray wrap
  • Chariot silver wrap
  • Chariot red wrap
  • Chariot blue wrap
  • Chariot green wrap
  • Chariot yellow wrap
  • Chariot orange wrap
  • Chariot purple wrap
  • Chariot pink wrap
  • Chariot teal wrap
  • Chariot brown wrap
  • Chariot gold wrap
  • Chariot chrome wrap
  • Chariot color shift wrap
  • Chariot carbon fiber wrap
  • Chariot camo and patterned wrap

How much vinyl to wrap a Mitsubishi Chariot

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2003van (5 doors)181.1 in (4,600 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1991–1997van (5 doors)177.8 in (4,515 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1983–1991van (5 doors)169.1 in (4,295 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Chariot wrap cost factors

Chariot wrap cost is determined by the amount of film, the number of panels, and the labor for the sliding doors and trim. A full wrap of the third generation uses about 66 ft (20 m) of cast film, while the first generation uses about 61 ft (18.5 m). The sliding doors add time because the tracks must be left bare and the film cut precisely along them. A partial wrap, a chrome delete, or paint protection film on the front end costs less than a full color change.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Chariot wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Chariot, third generation, factory photo
Factory color shown

1997–2003 Chariot van (third generation)

1997–2003van (5 doors)181.1 in (4,600 mm)

The third generation Mitsubishi Chariot, built from 1997 to 2003, is the longest of the three at 181.1 in (4,600 mm). The sliding side doors require the door tracks to stay bare, and the film is cut along those recessed channels. Because this generation is the largest, it needs about 66 ft (20 m) of 60-inch cast film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Mitsubishi Chariot, second generation, factory photo
Factory color shown

1991–1997 Chariot van (second generation)

1991–1997van (5 doors)177.8 in (4,515 mm)

The second generation Mitsubishi Chariot from 1991–1997 is 177.8 in (4,515 mm) long and uses about 64 ft (19.5 m) of cast film. With a car of these years, the paint may be original or repainted, so a test spot for adhesion comes before a full wrap. The installer checks the hood and roof for clear coat failure before laying film on those large panels.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Mitsubishi Chariot, first generation, factory photo
Factory color shown

1983–1991 Chariot van (first generation)

1983–1991van (5 doors)169.1 in (4,295 mm)

The first generation Mitsubishi Chariot from 1983–1991 is the smallest of the three, measuring 169.1 in (4,295 mm). Its shorter five-door body means fewer square feet of film, about 61 ft (18.5 m) for a full wrap. The number of panels is the same as later generations, but each panel is smaller, so less material is wasted.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Chariot

A partial wrap on a Mitsubishi Chariot can cover just the roof, the hood, and the mirror caps. A Chariot chrome delete covers the window trim and badges with black film, and that is often paired with a partial wrap. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use much less film than a full wrap and leave the sliding doors untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Chariot: body, cut-outs and film

A Mitsubishi Chariot vinyl wrap needs to cover a large five-door minivan body, and the film estimate reflects that. The third generation is 181.1 in (4,600 mm) long, while the first generation measures 169.1 in (4,295 mm), so older models use less film. All generations have sliding side doors, which add extra edges and recessed tracks that the installer must work around. Because the Chariot is a boxy van, the main panels are tall and flat, so large sheets of film can be applied without excessive stretching.

Chariot wrap ideas often start with the sliding side doors, because the door tracks must stay bare and the film is cut along them. The installer removes or works around door handles, mirrors, badges, and trim pieces to get clean edges. The roof is a large, uninterrupted area, but the side panels have recessed lines that require careful knifeless tape work. A full wrap on a Chariot also includes the rear hatch and the front bumper, which need relief cuts and proper post-heating.

How much vinyl to wrap a Chariot depends on the generation, because the body length changes over the years. The third generation from 1997–2003 is the longest at 181.1 in (4,600 mm) and needs about 66 ft (20 m) of standard cast film. The second generation from 1991–1997 is 177.8 in (4,515 mm) long and uses about 64 ft (19.5 m). The first generation from 1983–1991 is 169.1 in (4,295 mm) and calls for about 61 ft (18.5 m) of film. For chrome or patterned film, you need roughly 20 percent more material in every generation.

Questions about wrapping a Mitsubishi Chariot

How much vinyl does it take to wrap a Mitsubishi Chariot?

A full Mitsubishi Chariot wrap of the newest generation takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The oldest generation uses less: about 61 ft (18.5 m). For chrome or patterned film, add roughly 20 percent to those amounts.

Are the sliding doors of a Chariot wrapped?

Yes, the sliding doors of a Chariot are wrapped, but the door tracks stay bare. The film is cut along the recessed track, so the door can still slide without scraping the vinyl. This is a standard detail for any van with a sliding side door.

Can I wrap only the hood or the roof of a Chariot?

Yes, you can wrap only the hood or the roof of a Chariot. A partial wrap on this minivan commonly includes the roof, hood, and mirror caps. A chrome delete of the window trim and badges is another small job that can be done separately.

Is a Chariot hard to wrap?

A Chariot is moderately hard to wrap, mainly because of the sliding side doors and the large flat panels. The door tracks must be left bare, and the film is cut precisely along them for a clean edge. The long roof and hood are easy to work with, but the minivan size means more time spent on ladders and positioning.