Wraps by car

Mitsubishi Cordia wrap

The Mitsubishi Cordia wrap guide covers the 1982–1990 first generation hatchback. A full wrap of this two-door hatchback takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 56 ft (17 m). The page details the body, wrap facts, and cost factors for this single generation.

1generations15 mof film for a full wrap

Mitsubishi Cordia, first generation, factory photo
Mitsubishi Cordia, first generation. Factory color shown.

Mitsubishi Cordia wrap colors and ideas

  • Cordia black wrap
  • Cordia white wrap
  • Cordia gray wrap
  • Cordia silver wrap
  • Cordia red wrap
  • Cordia blue wrap
  • Cordia green wrap
  • Cordia yellow wrap
  • Cordia orange wrap
  • Cordia purple wrap
  • Cordia pink wrap
  • Cordia teal wrap
  • Cordia brown wrap
  • Cordia gold wrap
  • Cordia chrome wrap
  • Cordia color shift wrap
  • Cordia carbon fiber wrap
  • Cordia camo and patterned wrap

How much vinyl to wrap a Mitsubishi Cordia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1990hatchback (2 doors)168.3 in (4,275 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Cordia wrap cost factors

Cordia wrap cost depends on film type, panel condition, and labor time. The car is 168.3 in (4,275 mm) long and needs about 49 ft (15 m) of standard 60-inch film. Chrome or patterned film increases the material to about 56 ft (17 m). The tailgate with its rear glass adds trimming time, and the two long doors use large pieces.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (2 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Cordia wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Cordia, first generation, factory photo
Factory color shown

1982–1990 Cordia hatchback (first generation)

1982–1990hatchback (2 doors)168.3 in (4,275 mm)

The Mitsubishi Cordia first generation (1982–1990) often has original or repainted panels. Paint age matters: a test spot before a full wrap shows whether the film will adhere. This generation is a two-door hatchback with a tailgate that includes the rear glass. The long side doors are each wrapped as one large piece of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Cordia

Smaller jobs on a Cordia include a partial wrap of the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These options use less material than a full wrap and target specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Cordia: body, cut-outs and film

A Mitsubishi Cordia vinyl wrap on this hatchback works with compact dimensions: 168.3 in (4,275 mm) in length. The two long side doors are each wrapped as one large piece of film. The tailgate includes the rear glass, so the film ends at the edge of the glass. This body style keeps the wrap straightforward with large flat panels and no rear door seams.

Cordia wrap ideas begin with the tailgate and its integrated rear glass. The film on the tailgate ends at the edge of the glass, so installers trim around the glass cleanly. Two long side doors make each door a single large piece of film. For a clean look, consider wrapping the roof and pillars as part of a two-tone scheme.

How much vinyl to wrap a Cordia depends on the film type and panel size. For the first generation hatchback, the standard estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, allow about 56 ft (17 m). Since only one generation is in the catalog, the numbers stay the same for all 1982–1990 cars.

Questions about wrapping a Mitsubishi Cordia

How much vinyl does it take to wrap a Mitsubishi Cordia?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to fully wrap a Mitsubishi Cordia. If you use chrome or patterned film, the estimate is about 56 ft (17 m). This figure covers the first generation hatchback's tailgate with its rear glass and two long side doors.

Can I wrap only the hood or the roof of a Cordia?

Yes, you can wrap only the hood or the roof of a Cordia. Partial wrap options include the roof, hood, and mirror caps. Chrome delete for window trim and badges is another smaller job. Paint protection film on the front end is also available.

Is a Cordia hard to wrap?

The Cordia adds some work because of the tailgate with integrated rear glass. The film must end at the edge of the glass, which requires careful trimming. The two long side doors are each one large piece, so handling large sheets takes care. At 168.3 in (4,275 mm) long, the car is compact but the glass area needs attention.

How many generations of the Cordia does this page cover?

This page covers one generation of the Mitsubishi Cordia. That is the first generation, produced from 1982 to 1990. It is a two-door hatchback body style. All wrap figures on this page are for that generation.