Wraps by car

Mitsubishi Debonair wrap

This page covers the Mitsubishi Debonair wrap across three generations of the luxury sedan. The newest body, built from 1992 to 1999, takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. A vinyl wrap changes the exterior color without repainting the car.

3generations16.5 mof film for a full wrap

Mitsubishi Debonair, third generation, factory photo
Mitsubishi Debonair, third generation. Factory color shown.

Mitsubishi Debonair wrap colors and ideas

  • Debonair black wrap
  • Debonair white wrap
  • Debonair gray wrap
  • Debonair silver wrap
  • Debonair red wrap
  • Debonair blue wrap
  • Debonair green wrap
  • Debonair yellow wrap
  • Debonair orange wrap
  • Debonair purple wrap
  • Debonair pink wrap
  • Debonair teal wrap
  • Debonair brown wrap
  • Debonair gold wrap
  • Debonair chrome wrap
  • Debonair color shift wrap
  • Debonair carbon fiber wrap
  • Debonair camo and patterned wrap

How much vinyl to wrap a Mitsubishi Debonair

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1999sedan (4 doors)195.9 in (4,975 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1986–1992sedan (4 doors)184.6 in (4,690 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1964–1986sedan (4 doors)——

Debonair wrap cost factors

The Debonair wrap cost depends on the generation, film choice, and condition of the panels. A third-generation car needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while a second generation takes about 51 ft (15.5 m). Chrome or patterned film raises material usage to about 70 ft (21.5 m) on the newest body. Removing old paint defects or repairing rust on a first-generation car adds labor time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Debonair wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Debonair, third generation, factory photo
Factory color shown

1992–1999 Debonair sedan (third generation)

1992–1999sedan (4 doors)195.9 in (4,975 mm)

The third-generation Mitsubishi Debonair (1992–1999) presents paint age as a key concern for wrapping. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. A small film sample applied to each panel checks adhesion to aged paint. This step prevents lifting or peeling when the wrap is removed later.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Mitsubishi Debonair, second generation, factory photo
Factory color shown

1986–1992 Debonair sedan (second generation)

1986–1992sedan (4 doors)184.6 in (4,690 mm)

The second-generation Mitsubishi Debonair (1986–1992) uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Its four-door sedan body has fewer complex curves than later luxury cars. An installer can cut the hood, roof, trunk, and side panels from one continuous roll with less waste. The bumpers and door sills still require careful stretching to hold film without seams.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Mitsubishi Debonair, first generation, factory photo
Factory color shown

1964–1986 Debonair sedan (first generation)

1964–1986sedan (4 doors)

The first-generation Mitsubishi Debonair (1964–1986) was restyled in 1973, changing bumpers and lights. Film cut for one version does not fit the other, so measure the actual car before ordering. Early cars have more chrome trim and smaller tail lamps that wrap differently. A shop will template each panel because dimensions vary between 1964–1972 and 1973–1986 bodies.

Roof, hood, chrome delete and PPF on a Debonair

A partial wrap on a Debonair covers the roof, hood, or mirror caps instead of the whole body. A Debonair chrome delete replaces window trim and badges with black film for a monochrome look. Paint protection film (PPF) is clear film applied to the front end to shield against stone chips. These smaller jobs use less material and leave the original paint visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Debonair: body, cut-outs and film

The Mitsubishi Debonair vinyl wrap is shaped by its four-door sedan body and generous length. The third generation measures 195.9 in (4,975 mm), while the second is 184.6 in (4,690 mm) long. Sedans have large roof, hood, and trunk panels that use film efficiently. However, the long sides and bumpers add surface area an installer must cover.

Debonair wrap ideas often include a full color change or protecting the paint. The door handles, mirrors, and badges come off for a clean install. Window trim and grille need careful cut-outs, and a chrome delete wraps bright trim with black film. The front bumper and lower cladding may need extra relief cuts on older panels.

To know how much vinyl to wrap a Debonair, compare the three generations. The first generation lost its early bumpers and lights in a 1973 restyling, so later panels differ from early ones. The second generation uses about 51 ft (15.5 m) of 60-inch (1.52 m) film, roughly 3 ft (1 m) less than the third. First-generation film amounts vary because of the restyling and older body repairs.

Questions about wrapping a Mitsubishi Debonair

How much vinyl does it take to wrap a Mitsubishi Debonair?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a third-generation Mitsubishi Debonair. That figure covers the largest sedan body from 1992–1999. Older generations use slightly less film, about 51 ft (15.5 m) for the second generation.

Can I wrap only the hood or the roof of a Debonair?

Yes, you can wrap only the hood or the roof of a Debonair. A partial wrap covers the roof, hood, or mirror caps as separate jobs. A chrome delete works on window trim and badges, while paint protection film goes on the front end.

Is a Debonair hard to wrap?

A Debonair adds work because of its size, chrome trim, and long flat panels. The third-generation body is 195.9 in (4,975 mm) long, which requires careful handling of large film sheets. Door handles, mirrors, and badges come off for a clean install, and window trim needs precise cut-outs. Aged paint on older generations may need a test spot before full wrapping.

How many generations of the Debonair does this page cover?

This page covers three generations of the Mitsubishi Debonair. The first generation ran from 1964 to 1986, the second from 1986 to 1992, and the third from 1992 to 1999. Each body is a four-door luxury sedan with different dimensions and trim.