Wraps by car

Mitsubishi Diamante wrap

The Mitsubishi Diamante wrap page covers both generations of this full-size car from 1990 to 2005. A full wrap of the newest body takes about 52 ft (16 m) for the sedan or 64 ft (19.5 m) for the wagon using 60-inch (1.52 m) cast film. With chrome or patterned film, plan for up to about 74 ft (22.5 m).

2generations19.5 mof film for a full wrap

Mitsubishi Diamante, second generation, factory photo
Mitsubishi Diamante, second generation. Factory color shown.

Mitsubishi Diamante wrap colors and ideas

  • Diamante black wrap
  • Diamante white wrap
  • Diamante gray wrap
  • Diamante silver wrap
  • Diamante red wrap
  • Diamante blue wrap
  • Diamante green wrap
  • Diamante yellow wrap
  • Diamante orange wrap
  • Diamante purple wrap
  • Diamante pink wrap
  • Diamante teal wrap
  • Diamante brown wrap
  • Diamante gold wrap
  • Diamante chrome wrap
  • Diamante color shift wrap
  • Diamante carbon fiber wrap
  • Diamante camo and patterned wrap

How much vinyl to wrap a Mitsubishi Diamante

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2005sedan, wagon (4 or 5 doors)188.4 in (4,785 mm) to 189.4 in (4,810 mm)about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1990–1997sedan, wagon (4 or 5 doors)188.4 in (4,785 mm)about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Diamante wrap cost factors

Diamante wrap cost depends on the body style, film choice, and paint condition. A wagon needs more film than a sedan: about 64 ft (19.5 m) versus 52 ft (16 m) with 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 74 ft (22.5 m) and adds labor for aligning the pattern. Labor time also grows if the paint has chips or peeling clear coat that must be corrected before wrapping.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Diamante wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Diamante, second generation, factory photo
Factory color shown

1995–2005 Diamante sedan, wagon (second generation)

1995–2005sedan, wagon (4 or 5 doors)188.4 in (4,785 mm) to 189.4 in (4,810 mm)

The second generation Mitsubishi Diamante from 1995 to 2005 came as a four-door sedan or a five-door wagon. The wagon's larger rear section means a full wrap uses about 64 ft (19.5 m) of film, while the sedan uses about 52 ft (16 m). The wagon tailgate has the rear glass set into it, so the film must end neatly at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Mitsubishi Diamante, first generation, factory photo
Factory color shown

1990–1997 Diamante sedan, wagon (first generation)

1990–1997sedan, wagon (4 or 5 doors)188.4 in (4,785 mm)

The first generation Mitsubishi Diamante from 1990 to 1997 also offered sedan and wagon bodies with the same lengths. Paint age is the key concern on a car from these years. Some panels may be original while others have been repainted, so a test spot on each panel checks adhesion before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Diamante

A partial wrap on a Diamante can cover the roof, hood, or mirror caps in a color change film. Diamante chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Diamante: body, cut-outs and film

The Mitsubishi Diamante vinyl wrap is shaped by its sedan and wagon bodies, which are 188.4 in (4,785 mm) to 189.4 in (4,810 mm) long. These full-size panels mean a wrap uses the full width of a 60-inch (1.52 m) roll without extra seams. The wagon adds more tall rear panels and the tailgate, so it takes more film than the sedan. Both body styles have four doors, and the wagon can have a fifth door at the rear.

Diamante wrap ideas include working around the tailgate where the rear glass is set into it. The film ends at the edge of the glass, so the installer trims carefully along that line. Door handles, mirrors, and badges come off for a clean finish. The front and rear bumpers are wrapped in sections because of their curves.

Knowing how much vinyl to wrap a Diamante depends on the generation, but both share the same body lengths. The first generation (1990–1997) and the second generation (1995–2005) use about 52 ft (16 m) for the sedan and 64 ft (19.5 m) for the wagon. For chrome or patterned film, allow up to about 74 ft (22.5 m) on either generation. The main difference is paint condition, which can affect how much prep work is needed.

Questions about wrapping a Mitsubishi Diamante

How much vinyl does it take to wrap a Mitsubishi Diamante?

It takes about 52 ft (16 m) for a sedan or 64 ft (19.5 m) for a wagon to wrap a Mitsubishi Diamante with 60-inch (1.52 m) cast film. For chrome or patterned film, allow up to about 74 ft (22.5 m). These figures are for a full wrap of the newest body style.

Which Diamante body takes more film?

The wagon takes more film than the sedan to wrap. The wagon needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 52 ft (16 m). The wagon's taller rear panels and tailgate add surface area.

Can I wrap only the hood or the roof of a Diamante?

Yes, you can wrap only the hood or the roof of a Diamante. A partial wrap can cover just the roof, the hood, or the mirror caps. These jobs are smaller than a full wrap and use less film.

Is a Diamante hard to wrap?

A Diamante is not the hardest car to wrap, but its size and tailgate glass add work. The body is 188.4 in (4,785 mm) to 189.4 in (4,810 mm) long, so panels are large and need careful handling. The wagon's tailgate has the rear glass set into it, and the film must end at the edge of that glass.