Wraps by car

Mitsubishi eK Classy wrap

The Mitsubishi eK Classy wrap page covers the first-generation mini van produced from 2003 to 2005. A full vinyl wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 57 ft (17.5 m).

1generations15 mof film for a full wrap

Mitsubishi eK Classy, first generation, factory photo
Mitsubishi eK Classy, first generation. Factory color shown.

Mitsubishi eK Classy wrap colors and ideas

  • eK Classy black wrap
  • eK Classy white wrap
  • eK Classy gray wrap
  • eK Classy silver wrap
  • eK Classy red wrap
  • eK Classy blue wrap
  • eK Classy green wrap
  • eK Classy yellow wrap
  • eK Classy orange wrap
  • eK Classy purple wrap
  • eK Classy pink wrap
  • eK Classy teal wrap
  • eK Classy brown wrap
  • eK Classy gold wrap
  • eK Classy chrome wrap
  • eK Classy color shift wrap
  • eK Classy carbon fiber wrap
  • eK Classy camo and patterned wrap

How much vinyl to wrap a Mitsubishi eK Classy

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2005van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

eK Classy wrap cost factors

The eK Classy wrap cost is driven by the amount of film, the prep work, and the labor time. The van body takes about 49 ft (15 m) of cast film, or 57 ft (17.5 m) with chrome or patterned film. The sliding door tracks add cutting and finishing time. Removing or masking trim pieces also affects the final cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

eK Classy wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi eK Classy, first generation, factory photo
Factory color shown

2003–2005 eK Classy van (first generation)

2003–2005van (5 doors)133.7 in (3,395 mm)

The first-generation Mitsubishi eK Classy is a five-door mini van produced from 2003 to 2005. Its sliding side doors have tracks that stay bare, and the film is cut along them. The wrap installer must work around the track channel without covering the moving parts. The compact length of 133.7 in (3,395 mm) keeps the side panels manageable.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an eK Classy

An eK Classy chrome delete covers the window trim and badges with black film. A partial wrap can be done on the roof, hood, or mirror caps. Paint protection film (PPF) is a clear urethane film applied to the front end to shield against stone chips. These smaller jobs use less film and allow a custom look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi eK Classy: body, cut-outs and film

The Mitsubishi eK Classy vinyl wrap is sized for a compact five-door van at 133.7 in (3,395 mm) long. Its tall, boxy body adds vertical surface area on the doors and rear panel. The small footprint keeps material use below many larger vehicles. Sliding side doors change how the side film is planned.

The eK Classy wrap ideas start with the sliding door tracks, which stay bare and define where the film is cut. The door handles, badges, mirrors, and window trim are removed or masked for clean edges. The front bumper and grille need careful relief cuts around openings. The tailgate and rear lights are trimmed with the film tucked at the edges.

How much vinyl to wrap an eK Classy depends on the body style and film type. The first generation was sold from 2003 to 2005 as a five-door van only. A plain color change wrap needs about 49 ft (15 m) of 60-inch film. Chrome or patterned film needs about 57 ft (17.5 m) because the pattern must be matched.

Questions about wrapping a Mitsubishi eK Classy

How much vinyl does it take to wrap a Mitsubishi eK Classy?

A Mitsubishi eK Classy takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the estimate rises to about 57 ft (17.5 m). This covers the five-door van body of the first generation.

Are the sliding doors of an eK Classy wrapped?

Yes, the sliding doors of an eK Classy are wrapped, but the tracks stay bare. The film is cut along the track channel so the door can still slide freely. This leaves a clean line where the track is exposed.

Can I wrap only the hood or the roof of an eK Classy?

Yes, you can wrap only the hood or the roof of an eK Classy. A partial wrap may cover the roof, hood, mirror caps, or any combination of those panels. This is a smaller job than a full wrap and uses less material.

Is an eK Classy hard to wrap?

An eK Classy is not especially hard to wrap, but the sliding door tracks add work. You must cut the film along the tracks and keep them clear, which demands careful trimming. The small size of the van helps, but the boxy shape and vertical panels require attention to avoid wrinkles.