Wraps by car

Mitsubishi Emeraude wrap

This Mitsubishi Emeraude wrap page covers the first generation sedan produced from 1992 to 1996. A vinyl wrap on this mid-size four-door body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film raises that to roughly 64 ft (19.5 m).

1generations15.5 mof film for a full wrap

Mitsubishi Emeraude, first generation, factory photo
Mitsubishi Emeraude, first generation. Factory color shown.

Mitsubishi Emeraude wrap colors and ideas

  • Emeraude black wrap
  • Emeraude white wrap
  • Emeraude gray wrap
  • Emeraude silver wrap
  • Emeraude red wrap
  • Emeraude blue wrap
  • Emeraude green wrap
  • Emeraude yellow wrap
  • Emeraude orange wrap
  • Emeraude purple wrap
  • Emeraude pink wrap
  • Emeraude teal wrap
  • Emeraude brown wrap
  • Emeraude gold wrap
  • Emeraude chrome wrap
  • Emeraude color shift wrap
  • Emeraude carbon fiber wrap
  • Emeraude camo and patterned wrap

How much vinyl to wrap a Mitsubishi Emeraude

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1996sedan (4 doors)181.5 in (4,610 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Emeraude wrap cost factors

Emeraude wrap cost depends on the condition of the 1992–1996 panels, because original paint and repainted areas bond differently. You may need extra preparation if clear coat is peeling or if there is rust on the 181.5 in (4,610 mm) body. A chrome delete or partial wrap changes the amount of film and labor compared to a full color change.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Emeraude wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Emeraude, first generation, factory photo
Factory color shown

1992–1996 Emeraude sedan (first generation)

1992–1996sedan (4 doors)181.5 in (4,610 mm)

The first generation Mitsubishi Emeraude from 1992 to 1996 often has paint age differences between panels. A test spot on each panel shows whether the film will lift from an older repaint. Inspect the hood, roof, and doors before ordering the full 51 ft (15.5 m) of 60-inch (1.52 m) film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Emeraude

A partial wrap on an Emeraude can cover the roof, hood, or mirror caps without wrapping the whole sedan. An Emeraude chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) is another option, applying a clear film to the front end of this 1992–1996 car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Emeraude: body, cut-outs and film

A Mitsubishi Emeraude vinyl wrap deals with one sedan body style with four doors and a length of 181.5 in (4,610 mm). Because the car has no hatch or wagon version, you will not plan film for a fifth door or a long roofline. The mid-size sedan body means large side panels and a roof that are straightforward to cover with cast film.

Emeraude wrap ideas start with planning cut-outs for door handles, mirrors, trim, and lights. The four door handles and mirror caps are wrapped separately or removed for a cleaner edge. Badges and window trim can be taken off for a chrome delete, then reinstalled after the vinyl is applied.

To know how much vinyl to wrap an Emeraude, measure the one generation offered from 1992 to 1996. There is only one body style, so a full wrap always targets the same 181.5 in (4,610 mm) sedan. No long-wheelbase or wagon version changes the total film estimate of about 51 ft (15.5 m) of 60-inch cast film.

Questions about wrapping a Mitsubishi Emeraude

How much vinyl does it take to wrap a Mitsubishi Emeraude?

A full wrap of a Mitsubishi Emeraude takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The estimate covers the sedan body of 181.5 in (4,610 mm) with normal waste. Patterned or chrome film needs about 64 ft (19.5 m) to match the design.

Can I wrap only the hood or the roof of an Emeraude?

Yes, you can wrap only the hood or the roof of an Emeraude. A partial wrap on this sedan typically includes the roof, hood, or mirror caps. Choose a film that contrasts with the original paint to make the smaller area stand out.

Is an Emeraude hard to wrap?

An Emeraude is not unusually hard to wrap, but its older paint and size add work. The 181.5 in (4,610 mm) sedan body has large side panels that need careful positioning. Door handles, trim, and mirrors require cut-outs or removal, which adds time.

How many generations of the Emeraude does this page cover?

This page covers one generation of the Mitsubishi Emeraude, produced from 1992 to 1996. The catalog lists only the first generation sedan with four doors. No other generations are included here.