Wraps by car

Mitsubishi Endeavor wrap

The Mitsubishi Endeavor wrap page covers the one generation sold from 2003 to 2011, offered as a five-door SUV. A full vinyl wrap of this body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 80 ft (24.5 m) due to extra material needed for aligning patterns.

1generations19.5 mof film for a full wrap

Mitsubishi Endeavor, first generation, factory photo
Mitsubishi Endeavor, first generation. Factory color shown.

Mitsubishi Endeavor wrap colors and ideas

  • Endeavor black wrap
  • Endeavor white wrap
  • Endeavor gray wrap
  • Endeavor silver wrap
  • Endeavor red wrap
  • Endeavor blue wrap
  • Endeavor green wrap
  • Endeavor yellow wrap
  • Endeavor orange wrap
  • Endeavor purple wrap
  • Endeavor pink wrap
  • Endeavor teal wrap
  • Endeavor brown wrap
  • Endeavor gold wrap
  • Endeavor chrome wrap
  • Endeavor color shift wrap
  • Endeavor carbon fiber wrap
  • Endeavor camo and patterned wrap

How much vinyl to wrap a Mitsubishi Endeavor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2011SUV (5 doors)190.2 in (4,830 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Endeavor wrap cost factors

Endeavor wrap cost depends on the amount of film, the labor for its tall roof and tailgate, and the condition of the paint. A full wrap needs about 64 ft (19.5 m) of cast film, while chrome or patterned film can use about 80 ft (24.5 m). Removing parts like mirrors and trim adds time, and repairs to flaws in the paint raise the cost.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.6 in (1,768 mm)): the roof is wrapped from a platform.
  • Restyled in 2006: bumpers and lights differ between the versions, and so do the film cuts.

Endeavor wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Endeavor, first generation, factory photo
Factory color shown

2003–2011 Endeavor SUV (first generation)

2003–2011SUV (5 doors)190.2 in (4,830 mm)

The first generation Mitsubishi Endeavor was built from 2003 to 2011 with a restyling in 2006. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. Wrap kits and templates are specific to pre- or post-2006 models.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.6 in (1,768 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an Endeavor

An Endeavor chrome delete covers window trim and badges with black film to change the bright look. A partial wrap often includes the roof, hood, or mirror caps for a two-tone appearance. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Endeavor: body, cut-outs and film

The Mitsubishi Endeavor vinyl wrap must account for a large SUV body that is 190.2 in (4,830 mm) long and 69.6 in (1,768 mm) tall. Its boxy shape and long roof use more film than a smaller car. Installers often wrap the roof from a platform to reach the tall center area safely.

For Endeavor wrap ideas, the tailgate carries the rear glass and the film ends at the edge of the glass. The tall body means the roof is wrapped from a platform to reach the center surface. Door handles, mirrors, and trim pieces are removed for clean edges before wrapping.

How much vinyl to wrap an Endeavor depends on whether the SUV is pre- or post-2006, because the bumpers and lights changed at that time. Film cut for one version does not fit the other, so order the correct pattern for the year. The body length stays the same, but the front and rear ends differ.

Questions about wrapping a Mitsubishi Endeavor

How much vinyl does it take to wrap a Mitsubishi Endeavor?

A full wrap of a Mitsubishi Endeavor takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 80 ft (24.5 m) because pattern matching creates extra waste.

Which years of the Endeavor take the same film cuts?

The 2003–2005 Endeavor models take one set of film cuts, and the 2006–2011 models take another. The restyling for 2006 changed the bumpers and lights, so film patterns are not interchangeable across that split.

Can I wrap only the hood or the roof of an Endeavor?

Yes, you can wrap only the hood or the roof of an Endeavor. A partial wrap commonly includes the roof, hood, or mirror caps, while a chrome delete focuses on window trim and badges.

Is an Endeavor hard to wrap?

An Endeavor is not the easiest vehicle to wrap because of its tall body and tailgate with glass. The roof requires a platform to reach the 69.6 in (1,768 mm) height, and the tailgate film must end cleanly at the edge of the rear glass. Those details add careful trimming and more work time, but the flat sides are straightforward.