Wraps by car

Mitsubishi Eterna wrap

The Mitsubishi Eterna wrap page covers three generations of this mid-size car. The newest body is the 1992–1996 sedan. A full wrap of that body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap.

3generations15.5 mof film for a full wrap

Mitsubishi Eterna, seventh generation, factory photo
Mitsubishi Eterna, seventh generation. Factory color shown.

Mitsubishi Eterna wrap colors and ideas

  • Eterna black wrap
  • Eterna white wrap
  • Eterna gray wrap
  • Eterna silver wrap
  • Eterna red wrap
  • Eterna blue wrap
  • Eterna green wrap
  • Eterna yellow wrap
  • Eterna orange wrap
  • Eterna purple wrap
  • Eterna pink wrap
  • Eterna teal wrap
  • Eterna brown wrap
  • Eterna gold wrap
  • Eterna chrome wrap
  • Eterna color shift wrap
  • Eterna carbon fiber wrap
  • Eterna camo and patterned wrap

How much vinyl to wrap a Mitsubishi Eterna

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1996sedan (4 doors)181.5 in (4,610 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1988–1992hatchback, sedan (4 or 5 doors)179.5 in (4,560 mm)about 51 ft (15.5 m) for the sedan to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1983–1989sedan (4 doors)180.3 in (4,580 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Eterna wrap cost factors

Eterna wrap cost depends on film choice and body condition. A full wrap of any generation uses about 51 ft (15.5 m) of standard film. Chrome or patterned film adds about 11 to 13 ft (3.5 to 4 m) more. Paint age on older cars may require extra surface preparation before the wrap.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Eterna wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Eterna, seventh generation, factory photo
Factory color shown

1992–1996 Eterna sedan (seventh generation)

1992–1996sedan (4 doors)181.5 in (4,610 mm)

The seventh generation Mitsubishi Eterna is a mid-size sedan made from 1992 to 1996. It is 181.5 in (4,610 mm) long. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Mitsubishi Eterna, sixth generation, factory photo
Factory color shown

1988–1992 Eterna hatchback, sedan (sixth generation)

1988–1992hatchback, sedan (4 or 5 doors)179.5 in (4,560 mm)

The sixth generation Mitsubishi Eterna came as a hatchback and a sedan from 1988 to 1992. The body style decides the panel plan and film amount. The sedan is 179.5 in (4,560 mm) long and needs about 51 ft (15.5 m) of film. The hatchback needs about 52 ft (16 m) and has a tailgate with the rear glass in it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Mitsubishi Eterna, fifth generation, factory photo
Factory color shown

1983–1989 Eterna sedan (fifth generation)

1983–1989sedan (4 doors)180.3 in (4,580 mm)

The fifth generation Mitsubishi Eterna is a sedan made from 1983 to 1989. Its years overlap with the newer body from 1988 to 1989, so the owner of a car from those years checks which body it is. This generation is 180.3 in (4,580 mm) long. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Eterna

A partial wrap on a Mitsubishi Eterna can be a roof, hood, or mirror caps. Eterna chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Eterna: body, cut-outs and film

A Mitsubishi Eterna vinyl wrap is planned around the body style. The sedan is the only style for the 1992–1996 and 1983–1989 generations. The 1988–1992 generation adds a hatchback with a tailgate. The car is about 180 in (4,600 mm) long, so a full wrap uses 51 ft (15.5 m) of standard film.

Eterna wrap ideas include a full color change or partial accents. On the 1988–1992 hatchback, the tailgate has the rear glass in it, so the film ends at the edge of the glass. Sedans have simple doors and trunk lids that wrap in one piece each. Mirror caps and door handles are small parts that can be done in a contrasting color.

To know how much vinyl to wrap an Eterna, check the generation. The 1992–1996 sedan needs about 51 ft (15.5 m). The 1988–1992 sedan needs the same, while the hatchback needs about 52 ft (16 m). The 1983–1989 sedan needs about 51 ft (15.5 m). These figures are for 60-inch (1.52 m) cast film without chrome or patterns.

Questions about wrapping a Mitsubishi Eterna

How much vinyl does it take to wrap a Mitsubishi Eterna?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Mitsubishi Eterna of the newest body. This figure is for the 1992–1996 sedan without chrome or patterned film.

Can I wrap only the hood or the roof of an Eterna?

Yes, you can wrap only the hood or the roof of an Eterna. A partial wrap is a common smaller job that also includes mirror caps. Chrome delete on window trim and badges is another option that does not cover whole panels.

Is an Eterna hard to wrap?

An Eterna is not hard to wrap, but some parts add work. On the 1988–1992 hatchback, the tailgate has the rear glass in it, so the film ends at the edge of the glass. The car is a mid-size at about 180 in (4,600 mm) long, which means large door and fender panels that need careful handling.

How many generations of the Eterna does this page cover?

This page covers three generations of the Mitsubishi Eterna. They are the fifth generation from 1983 to 1989, the sixth from 1988 to 1992, and the seventh from 1992 to 1996.