Wraps by car

Mitsubishi Freeca wrap

This page covers the Mitsubishi Freeca wrap, a vinyl wrap job for the single-generation van made from 1997 to 2008. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The page explains the van's wrap challenges, the partial jobs that make sense, and what drives the cost.

1generations19 mof film for a full wrap

Mitsubishi Freeca, first generation, factory photo
Mitsubishi Freeca, first generation. Factory color shown.

Mitsubishi Freeca wrap colors and ideas

  • Freeca black wrap
  • Freeca white wrap
  • Freeca gray wrap
  • Freeca silver wrap
  • Freeca red wrap
  • Freeca blue wrap
  • Freeca green wrap
  • Freeca yellow wrap
  • Freeca orange wrap
  • Freeca purple wrap
  • Freeca pink wrap
  • Freeca teal wrap
  • Freeca brown wrap
  • Freeca gold wrap
  • Freeca chrome wrap
  • Freeca color shift wrap
  • Freeca carbon fiber wrap
  • Freeca camo and patterned wrap

How much vinyl to wrap a Mitsubishi Freeca

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2008van (5 doors)170.1 in (4,320 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Freeca wrap cost factors

A Freeca wrap cost is set by the size of the van, the film you choose, and the amount of cut work. The body is 170.1 in (4,320 mm) long and 70.9 in (1,800 mm) tall, so a full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film. The sliding door tracks and the roof height add labor that a low, simple car does not have.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Freeca wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Freeca, first generation, factory photo
Factory color shown

1997–2008 Freeca van (first generation)

1997–2008van (5 doors)170.1 in (4,320 mm)

The first generation Mitsubishi Freeca from 1997 to 2008 is the only body in the catalog. Its sliding side doors have tracks that stay bare, and the film is cut along them. The tall body means the roof is wrapped from a platform, which adds setup time for any full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Freeca

A partial wrap on a Mitsubishi Freeca can cover just the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that shields the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Freeca: body, cut-outs and film

A Mitsubishi Freeca vinyl wrap works around a five-door van body that is 170.1 in (4,320 mm) long. The tall body and sliding side doors add film area and time compared with a small hatchback. Because the van has only one generation, a wrap plan is the same for every production year from 1997 to 2008.

Freeca wrap ideas start with the side doors: the sliding door tracks stay bare, and the film is cut along them. The roof is wrapped from a platform because the van stands 70.9 in (1,800 mm) tall. Window trim and badges can be covered with black film for a chrome delete.

How much vinyl to wrap a Freeca depends on the film you pick. A color change wrap in a solid cast film takes about 62 ft (19 m) of 60-inch (1.52 m) material. Chrome or patterned film adds waste and takes about 72 ft (22 m) for the same full wrap of the 1997–2008 van.

Questions about wrapping a Mitsubishi Freeca

How much vinyl does it take to wrap a Mitsubishi Freeca?

About 62 ft (19 m) of 60-inch (1.52 m) cast film is the estimate for a full wrap of a Mitsubishi Freeca. Chrome or patterned film needs about 72 ft (22 m) because of extra cutting waste. The van is 170.1 in (4,320 mm) long, so the film must cover a tall five-door body.

Are the sliding doors of a Freeca wrapped?

Yes, the sliding doors of a Freeca are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors can still slide. This cut line is part of the wrap plan for the van's side panels.

Can I wrap only the hood or the roof of a Freeca?

Yes, you can wrap only the hood or the roof of a Freeca. A partial wrap on this van covers the roof, the hood, or the mirror caps. These smaller jobs use less film than a full wrap of the whole 1997–2008 body.

Is a Freeca hard to wrap?

A Freeca is not the easiest van to wrap because of its tall body and sliding doors. The roof is wrapped from a platform since the van is 70.9 in (1,800 mm) high. The sliding door tracks stay bare and the film is cut along them, which adds careful trimming to the job.