Wraps by car

Mitsubishi FTO wrap

The Mitsubishi FTO wrap page covers the single generation built from 1994 to 2000. This compact coupe has two doors and a length of 170.1 in (4,320 mm). A full color change wrap on this body needs about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl wrap. For chrome or patterned film the estimate is about 54 ft (16.5 m).

1generations14 mof film for a full wrap

Mitsubishi FTO, first generation, factory photo
Mitsubishi FTO, first generation. Factory color shown.

Mitsubishi FTO wrap colors and ideas

  • Mitsubishi FTO black wrap
  • Mitsubishi FTO white wrap
  • Mitsubishi FTO gray wrap
  • Mitsubishi FTO silver wrap
  • Mitsubishi FTO red wrap
  • Mitsubishi FTO blue wrap
  • Mitsubishi FTO green wrap
  • Mitsubishi FTO yellow wrap
  • Mitsubishi FTO orange wrap
  • Mitsubishi FTO purple wrap
  • Mitsubishi FTO pink wrap
  • Mitsubishi FTO teal wrap
  • Mitsubishi FTO brown wrap
  • Mitsubishi FTO gold wrap
  • Mitsubishi FTO chrome wrap
  • Mitsubishi FTO color shift wrap
  • Mitsubishi FTO carbon fiber wrap
  • Mitsubishi FTO camo and patterned wrap

How much vinyl to wrap a Mitsubishi FTO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2000coupe (2 doors)170.1 in (4,320 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Mitsubishi FTO wrap cost factors

Mitsubishi FTO wrap cost depends on the condition of the 1994–2000 panels and the film chosen for the 4,320 mm body. The compact size keeps the base material need at about 46 ft for a standard wrap. Film with a chrome or pattern finish uses about 54 ft, which adds to the total. The two long doors are simple to wrap, but surface prep on older paint can change the labor time.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mitsubishi FTO wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi FTO, first generation, factory photo
Factory color shown

1994–2000 Mitsubishi FTO coupe (first generation)

1994–2000coupe (2 doors)170.1 in (4,320 mm)

The first generation Mitsubishi FTO from 1994–2000 often has paint that is no longer factory fresh. Some panels may be original while others are repainted, and a test spot of film on each panel type is needed before a full wrap. Old clear coat can fail and lift with the film. A wrap shop will check adhesion on every surface before quoting the job.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Mitsubishi FTO

A partial wrap on a Mitsubishi FTO can cover the roof, hood, or mirror caps instead of the full body. A chrome delete covers the window trim and badges with black vinyl. Paint protection film (PPF) works well on the front end of this low coupe. These smaller jobs use much less of the 46 ft full-wrap estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi FTO: body, cut-outs and film

A Mitsubishi FTO vinyl wrap is planned around its compact coupe shape and limited size. The car measures 170.1 in (4,320 mm) long, which keeps material use lower than on a large sedan. The two long side doors each take one large piece of film. This body style has no rear doors or complex side skirts to add panels.

Mitsubishi FTO wrap ideas should account for the two long side doors as the main wrapped panels. The bumpers, mirrors, and the rear wing on some versions require cut-outs and careful trimming. The door handles, side markers, and antenna also need openings in the film. The side mirrors can come off for a cleaner edge, and the front bumper may need removal on some aftermarket kits.

How much vinyl to wrap a Mitsubishi FTO changes only by the film type, because the page covers one generation. The production years 1994–2000 use the same coupe body and dimensions. A standard color change wrap needs about 46 ft (14 m) of 60-inch (1.52 m) film. Switching to chrome or patterned film raises the estimate to about 54 ft (16.5 m).

Questions about wrapping a Mitsubishi FTO

How much vinyl does it take to wrap a Mitsubishi FTO?

A Mitsubishi FTO wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film needs about 54 ft (16.5 m). These figures are for a full color change on the 1994–2000 coupe.

Can I wrap only the hood or the roof of a Mitsubishi FTO?

Yes, you can wrap only the hood or the roof of a Mitsubishi FTO. The partial wrap options for this car include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is also possible. These jobs need less film than the full 46 ft estimate.

Is a Mitsubishi FTO hard to wrap?

A Mitsubishi FTO is not hard to wrap, but the two long side doors each need one large piece of film. A single installer can handle the 170.1 in (4,320 mm) long body with care. The bumpers and the rear wing on some versions add cut-out work. Plan for extra time on the door panels due to their size.

How many generations of the Mitsubishi FTO does this page cover?

This page covers one generation of the Mitsubishi FTO. The only generation in the catalog is the first generation, built from 1994 to 2000 as a two-door coupe.