Wraps by car

Mitsubishi GTO wrap

The Mitsubishi GTO wrap page covers the 1990–1993 first generation and the 1993–2001 second generation of this two-door sports car. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that estimate to about 57 ft (17.5 m). Both generations share the same two-door coupe shape.

2generations15.5 mof film for a full wrap

Mitsubishi GTO, second generation, factory photo
Mitsubishi GTO, second generation. Factory color shown.

Mitsubishi GTO wrap colors and ideas

  • Mitsubishi GTO black wrap
  • Mitsubishi GTO white wrap
  • Mitsubishi GTO gray wrap
  • Mitsubishi GTO silver wrap
  • Mitsubishi GTO red wrap
  • Mitsubishi GTO blue wrap
  • Mitsubishi GTO green wrap
  • Mitsubishi GTO yellow wrap
  • Mitsubishi GTO orange wrap
  • Mitsubishi GTO purple wrap
  • Mitsubishi GTO pink wrap
  • Mitsubishi GTO teal wrap
  • Mitsubishi GTO brown wrap
  • Mitsubishi GTO gold wrap
  • Mitsubishi GTO chrome wrap
  • Mitsubishi GTO color shift wrap
  • Mitsubishi GTO carbon fiber wrap
  • Mitsubishi GTO camo and patterned wrap

How much vinyl to wrap a Mitsubishi GTO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2001coupe (2 doors)180.1 in (4,575 mm) to 181.1 in (4,600 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1990–1993coupe (2 doors)179.7 in (4,565 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Mitsubishi GTO wrap cost factors

Mitsubishi GTO wrap cost depends on film choice, the amount of chrome or patterned film needed, and the condition of the paint. A full wrap uses about 51 ft (15.5 m) of standard cast film, with chrome or patterned film at about 57 ft (17.5 m) for the newest body. The two long side doors are large but straightforward, so the main variable is prep work. Paint correction before wrapping adds steps and therefore cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1998: bumpers and lights differ between the versions, and so do the film cuts.

Mitsubishi GTO wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi GTO, second generation, factory photo
Factory color shown

1993–2001 Mitsubishi GTO coupe (second generation)

1993–2001coupe (2 doors)180.1 in (4,575 mm) to 181.1 in (4,600 mm)

The second generation Mitsubishi GTO ran from 1993 to 2001 and was restyled in 1998. The restyle changed the bumpers and lights, so film cut for one version does not fit the other. The body length ranges from 180.1 in (4,575 mm) to 181.1 in (4,600 mm), but the overall wrap area is about the same. When ordering a kit, check whether it is for the early or late front and rear ends.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi GTO, first generation, factory photo
Factory color shown

1990–1993 Mitsubishi GTO coupe (first generation)

1990–1993coupe (2 doors)179.7 in (4,565 mm)

The first generation Mitsubishi GTO was built from 1990 to 1993 and is a single body style with a length of 179.7 in (4,565 mm). Paint age is a key concern on a car of these years, because panels may be original or repainted. A test spot comes before a full wrap to check that the film adheres evenly to the old paint. The two long side doors are the same large pieces as on the later car.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Mitsubishi GTO

A Mitsubishi GTO chrome delete covers the window trim and badges with black film, and a partial wrap can cover the roof, hood or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use much less material than a full color change wrap. The two long side doors are not involved, so the work is quicker.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi GTO: body, cut-outs and film

A Mitsubishi GTO vinyl wrap works with a body that is about 180 in (4.57 m) long and has two long side doors. Each door is one large piece of film, so the side panels need careful handling but produce clean results. The coupe has no B-pillar to interrupt the glass area, which keeps the side profile simple. The roof and rear quarters are moderate in size and do not add extra seams.

Mitsubishi GTO wrap ideas start with the two long side doors, which are the largest pieces on the car. The front and rear bumpers need cut-outs for lights, grilles and exhaust outlets, and the side mirrors are best wrapped off the car. Door handles, badges and the fuel filler cap are typically removed for a clean edge. The pop-up headlights on the first generation add a detail to work around.

How much vinyl to wrap a Mitsubishi GTO depends on the generation, because the second generation was restyled in 1998. The first generation is 179.7 in (4,565 mm) long and uses about the same 51 ft (15.5 m) of film as the second. The second generation grew to as much as 181.1 in (4,600 mm) after the restyle, but the film estimate stays the same. The only difference is 1 ft less chrome or patterned film for the first generation.

Questions about wrapping a Mitsubishi GTO

How much vinyl does it take to wrap a Mitsubishi GTO?

About 51 ft (15.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Mitsubishi GTO of the newest body. The first generation takes about the same amount of standard film, but chrome or patterned film for the second generation is about 57 ft (17.5 m). The estimate assumes a full color change wrap without a roof seam.

Which years of the Mitsubishi GTO take the same film cuts?

The Mitsubishi GTO models from 1990 to 1993 share the same film cuts, and the 1993 to 2001 second generation shares cuts within its early and late versions. The second generation was restyled in 1998, so bumpers and lights differ between early and late cars. A first-generation car uses a different front and rear than any second-generation car.

Can I wrap only the hood or the roof of a Mitsubishi GTO?

Yes, you can wrap only the hood or the roof of a Mitsubishi GTO, and these are typical partial wrap areas. Mirror caps and a chrome delete on the window trim and badges are also smaller jobs. They use much less film than a full wrap. Paint protection film on the front end is another clear-film option.

Is a Mitsubishi GTO hard to wrap?

A Mitsubishi GTO is not hard to wrap, but the two long side doors add work because each is one large piece of film. The doors have no sharp curves, so the film lays flat with careful stretching. The front and rear bumpers need cut-outs for lights and grilles. The first generation's pop-up headlights require extra attention around the panel gaps.